![]() |
Re: Br3w City's Project omgwtfbbq
Man that will turn heads. I always tend to like low key black but that is an awesome color.
|
Re: Br3w City's Project omgwtfbbq
Decided to start making some home-brewed tailgate cables. Picked up some plasti-dip, and will be coating these tomorrow.
http://i112.photobucket.com/albums/n...evy/002-23.jpg http://i112.photobucket.com/albums/n...evy/003-23.jpg http://i112.photobucket.com/albums/n...evy/004-19.jpg http://i112.photobucket.com/albums/n...evy/005-15.jpg http://i112.photobucket.com/albums/n...evy/006-17.jpg http://i112.photobucket.com/albums/n...evy/007-17.jpg http://i112.photobucket.com/albums/n...evy/008-17.jpg I DON'T KNOW WHY MY CAMERA MAKES EVERYTHING LOOK SO DIRRTY!! http://i112.photobucket.com/albums/n...evy/010-18.jpg |
Re: Br3w City's Project omgwtfbbq
uh......check the lens? :lol:
|
Re: Br3w City's Project omgwtfbbq
thats the thing, the lense looks clean. I think paint or dirt got INSIDE of it...and I tried to take it apart to clean once to no avail. It'll get the DSLR treatment once assembly is done and its all cleaned up, but I'd really like to have my camera work normally.
|
Re: Br3w City's Project omgwtfbbq
I am getting ready to spry mine with Hot rod flatz. How do you take care of flat paint? I have never had it before. Yours came out good.
|
Re: Br3w City's Project omgwtfbbq
hot rod flatz paint itself will have different care, as the only flat thing on my paintjob is the clear.
I don't know if HRF has a clear available, if so the care may be similar. You can't buff, polish or color sand it, as the texture is only really on the top layer of the paint. Wash it with wax-free soap and a good soft towel. There are some high-end washes and care products for high-end cars (bmw ice paint, audi flat) but all you really need is some Dawn. You CAN wax it, but it wil create a "sheen" that might look weird on black, but looks ok on colors. Once the wax dulls tho, you have to wash with wax removing soap, then RE-wax if you want. Its generally not recommended to layer wax on a flat car. The tendency is also to buff with wax, which will hurt the coating. |
Re: Br3w City's Project omgwtfbbq
Had random stuff to do today, as yet again I came just a few connectors/screws/bolts short of getting more done.
I did do some misc work tho. I wanted to make a custom horn button for my grant wheel. I've already designed it in photoshop, but my only option is to print it or make it like a sticker. Instead I wanted a "thick" button, with the epoxy top much like the vintage horn buttons of years past. The Grant button is 1.55", and I had a little candle holder in the basement that came suuuper close. Stirred up some craft epoxy (high gloss, doesn't dry opaque) and poured it in with a little release agent rubbed on the sides. Hopefully, I'll be able to pull (or more likely break the glass) around it, remove my new bubble top, and buff it clean. Its only an experiment :) http://i112.photobucket.com/albums/n...evy/003-24.jpg http://i112.photobucket.com/albums/n...evy/001-21.jpg http://i112.photobucket.com/albums/n...evy/010-19.jpg Then I picked up some Plasti-Dip. This stuff is fun, and was the perfect solution to help finish bring together my new tailgate hardware. I dipped the ends in it (2 coats, ended up being thicker than I expected), then let them dry out. These will be re assembled and prevent vibration and scratching. I included a video of a dip below as well. http://i112.photobucket.com/albums/n...evy/002-24.jpg http://i112.photobucket.com/albums/n...evy/004-20.jpg http://i112.photobucket.com/albums/n...evy/005-16.jpg http://i112.photobucket.com/albums/n...evy/008-18.jpg **Video** http://i112.photobucket.com/albums/n...th_MyMovie.jpg |
Re: Br3w City's Project omgwtfbbq
The dipped hooks, washer stacks, and the installed product! (I'm going to clip off the extra thread length, and put a black bolt cap over it)
http://i112.photobucket.com/albums/n...evy/001-22.jpg http://i112.photobucket.com/albums/n...evy/002-25.jpg http://i112.photobucket.com/albums/n...evy/004-21.jpg http://i112.photobucket.com/albums/n...evy/003-25.jpg |
Re: Br3w City's Project omgwtfbbq
Very cool! i like it.
|
Re: Br3w City's Project omgwtfbbq
Scuffed up my front bumper to remove a little oxidation from sitting after getting blasted, then started in with the sealer and black topcoat.
http://i112.photobucket.com/albums/n...evy/002-26.jpg http://i112.photobucket.com/albums/n...evy/006-18.jpg Time for the door speakers to go in and completes work on the door. Got lucky enough to get some plenum-rated speaker wire for free, and as a bonus, its blue :) http://i112.photobucket.com/albums/n...evy/001-23.jpg http://i112.photobucket.com/albums/n...evy/003-26.jpg http://i112.photobucket.com/albums/n...evy/004-22.jpg http://i112.photobucket.com/albums/n...evy/005-17.jpg Testing them off the head unit only, there is a MASSIVE improvement. The new door panels and lower panels deaden the sounds MUCH better, and the new carpet etc helps keep it all from rattling around. Considering it was hu power only, windows down, no windshield in and door 6x9's only, I was massively impressed with the sound. Once the console and 6.5 components are in place with the amp, I will have tunes loud enough to hear clearly over my rediculous exhaust note. |
Re: Br3w City's Project omgwtfbbq
Put the front bumper back on, and she's assembled fully sans the windscreen. Took a bunch of misc pics with her cleaned up a bit more.
http://i112.photobucket.com/albums/n...evy/010-20.jpg http://i112.photobucket.com/albums/n...evy/011-19.jpg http://i112.photobucket.com/albums/n...evy/009-17.jpg http://i112.photobucket.com/albums/n...evy/008-19.jpg http://i112.photobucket.com/albums/n...evy/006-19.jpg http://i112.photobucket.com/albums/n...evy/005-18.jpg http://i112.photobucket.com/albums/n...evy/004-23.jpg http://i112.photobucket.com/albums/n...evy/001-24.jpg |
Re: Br3w City's Project omgwtfbbq
Awesome, but you will have bugs in your teeth until you get the windscreen in:metal:
Nice close up pics, how about a few from back a ways, give us the full affect... |
Re: Br3w City's Project omgwtfbbq
LOOKS GREAT
Can you tell me what the windshield cost I,m in the market for one. Is yours clear with a dark band. |
Re: Br3w City's Project omgwtfbbq
truck looks awesome the blue is killer and the mickys :burnout:love those im still admiring those tail lights to and i wish i was as lucky as you with the grinder accident :lol:
|
Re: Br3w City's Project omgwtfbbq
LOOKS GREAT, SOUNDS GREAT, MUSIC MADE ME WANT TO HURT SOMEONE :lol:
|
Re: Br3w City's Project omgwtfbbq
just read this whole thread from page one....great work!!!
|
Re: Br3w City's Project omgwtfbbq
Truck is looking and sounding great! How are you liking those MT? Are they worth the money do you think? I was looking at them and they are $$$!
|
Re: Br3w City's Project omgwtfbbq
the color :metal::metal: the sound of the motor :metal::metal: over all :metal::metal::metal::metal: and you threw in some killswitch engage :metal::metal::metal::metal::metal::metal:
|
Re: Br3w City's Project omgwtfbbq
Quote:
The M/T are prob one of the best tires out there. To be honest, I havent' actually tracked the truck, so I've never done the proper burnout procedure and tried to launch on them....I need to wait till the new shifter is in and I get my overdrive setting changed before I run it. As far as street driving on them goes, they are a pretty good street tire, and considering the cost of ANY tire for a 12+ wide wheel, they aren't that bad. I've got about 3400 miles on this set, and they have been just fine as a street tire except 2 things. 1. because of the size (and the suspension on the truck...they "bounce" a bit 2. Rain..its evil, but I can keep the truck straight on the highway in a downpour....but emergency stops and starting off in a puddle is tough (i try to avoid that obvisouly. |
Re: Br3w City's Project omgwtfbbq
Quote:
|
Re: Br3w City's Project omgwtfbbq
Hell yeah, sounds and looks great!
|
Re: Br3w City's Project omgwtfbbq
This is only a 1-pic update as its a holiday weekend, and I've just been driving her around a little.
I had the wiper arms that I painted a while back with everything else, and finally got some new blades so I could re-install them. This is the final piece of exterior time (sans the wheels at powdercoaters) that could be re-installed, officially having the truck "together". http://i112.photobucket.com/albums/n...y/IMAG0158.jpg I also had to cut and re-weld the arm on my Kilduff shifter, since Mr. Kilduff doesn't seem to know how to properly use a tape measure. Should be installing it this week, pics will come then. |
Re: Br3w City's Project omgwtfbbq
lookin goood whats them leaves on the drive way are the leaves turnin all ready lol dang its to darn hot here 101 toda worked early in the shop buy noon its hunting a c next weekend rain and my be low 90 s
lookin good man :metal: |
Re: Br3w City's Project omgwtfbbq
Ya, well it get fall-ish early up here, and that tree just sucks. It always drops crap on my truck.
As I mentioned, I had to mod my new shifter since It was made to the wrong height. Looks like my welds are improving :) http://i112.photobucket.com/albums/n...y/IMAG0160.jpg http://i112.photobucket.com/albums/n...y/IMAG0161.jpg http://i112.photobucket.com/albums/n...y/IMAG0166.jpg http://i112.photobucket.com/albums/n...y/IMAG0162.jpg |
Re: Br3w City's Project omgwtfbbq
Hooked my shifter up, and bolted it down. I really like the 'gate' that it has. My old shifter worked fine, but this is more positive as it more or less locks into each position, and has a spring feel to the handle. I also opted for the reverse lockout so I don't do anything stupid by accident.
http://i112.photobucket.com/albums/n...evy/002-29.jpg http://i112.photobucket.com/albums/n...evy/001-25.jpg Side note; I was using a drill-socket adapter thingy that I had extra from a Ryobi drill kit. What a piece of garbage. Installing a self tapping screw for the shifter. http://i112.photobucket.com/albums/n...evy/003-29.jpg |
Re: Br3w City's Project omgwtfbbq
It's been a while since I checked in. It has really turned out nice!! Congrats on the progress.
|
Re: Br3w City's Project omgwtfbbq
Thanks Alan!
I picked up my wheels from powdercoat today, nice n satin to match the rest of the accessories! http://i112.photobucket.com/albums/n...y/IMAG0168.jpg http://i112.photobucket.com/albums/n...y/IMAG0167.jpg http://i112.photobucket.com/albums/n...y/IMAG0169.jpg |
Re: Br3w City's Project omgwtfbbq
Wheels look great.
|
Re: Br3w City's Project omgwtfbbq
Did most of the cutting and test fitting of my Synthetic decking for the bed. This is just test fit over the plywood. I still need to pull the plywood out, drill and secure these, and cut the little filler pieces for the edges.
http://i112.photobucket.com/albums/n...y/IMAG0175.jpg http://i112.photobucket.com/albums/n...y/IMAG0174.jpg |
Re: Br3w City's Project omgwtfbbq
My bed is going to be multi-piece, so I can access the under bed fuel cell. I was working on the rear main portion today. I had to take a bed support, cut it down , and weld it and a square tube spacer to the crossmember, so the "wood" sits even in the bed. Because of its thickness and difference in width, it lines up a lot differently than normal.
http://i112.photobucket.com/albums/n...y/IMAG0176.jpg http://i112.photobucket.com/albums/n...y/IMAG0180.jpg Then it was a matter of lining up, drilling, syncing, bolting and repeating. http://i112.photobucket.com/albums/n...y/IMAG0177.jpg http://i112.photobucket.com/albums/n...y/IMAG0178.jpg http://i112.photobucket.com/albums/n...y/IMAG0179.jpg I need to finish off the ends, and do the rear portion this weekend. |
Re: Br3w City's Project omgwtfbbq
Quote:
What kind of hose is that, and what kind of connection is that brass swivel? I would want to make an improvement there. |
Re: Br3w City's Project omgwtfbbq
You're welcome to make any improvements to my truck that you'd like. Just send me a powerpoint on what you'd like to change, and funding for the parts to my paypal account. Please allow 15-30 days for changes to occur, no refunds, if multiple ideas are submitted for the same thing I reserve the right to pick. That is fuel injection rated braided fuel hose, the kind of stuff you would normally fix an AN fitting to. While a 90* AN fitting and shortening the hose up would be prettier and more "correct", the setup is not really a hazard.
The fitting itself is an AN to hose barb fitting, as for why its brass, thats what came in the box when I ordered it. The line is a RETURN line, and that is a fuel injection rated clamp holding it in place. I understand your concern since its on a fuel system, but its all FI rated stuff, proper connections and correct clamps etc, on the lower pressure side of a return fuel system. |
Re: Br3w City's Project omgwtfbbq
....still look better with a 90* tho. :exit:
:lol: |
Re: Br3w City's Project omgwtfbbq
Ya you better run :sumo:
Random Pro-Tip; If you ever get crap all of the splatter shield on your welding helmet, its kind of annoying. Between burn marks, gunk from cars falling on you, weld spatter etc, it can block a lot of vision. Although you CAN buy new shields, the shield itself wasn't really damaged, just gunked up. A little polishing compound does a pretty nice job extending its life. http://i112.photobucket.com/albums/n...y/IMAG0181.jpg I cut up a bed support and used some square tube to build a support/drop subframe for the rear boards, allowing the location of the gas filler. http://i112.photobucket.com/albums/n...y/IMAG0182.jpg http://i112.photobucket.com/albums/n...y/IMAG0183.jpg Then I mocked up the rear boards, only bolting a few in place for spacing, and made the hinged door for the gas filler. It has spring roller hinges, a magnetic clasp, and I have to add a handle to open it as well. http://i112.photobucket.com/albums/n...y/IMAG0186.jpg http://i112.photobucket.com/albums/n...y/IMAG0184.jpg http://i112.photobucket.com/albums/n...y/IMAG0185.jpg http://i112.photobucket.com/albums/n...y/IMAG0187.jpg Tomorrow I'm finished the removeable door for the access to where I will be moving the battery, bolting down the rear of all the boards in the back, and getting trim strips for in between some of the boards. |
Re: Br3w City's Project omgwtfbbq
Great tip on the welding helmet! I hate that crap with the shields. I just bought one when I was 90 percent done with the boxing of the frame and it already looks terrible and your welds certainly do suffer when you can't see I found out. Interesting concept with the bed floor, I like it.
|
Re: Br3w City's Project omgwtfbbq
I like your innovative bed design !!
I have an idea for mine that will be 45 degrees from normal too :metal: |
Re: Br3w City's Project omgwtfbbq
Ill have to see if polishin my lense helps.. I seem to always want my face as close to the fire as possible... Thanks for the tip..
|
Re: Br3w City's Project omgwtfbbq
Added my splash guard/gas cap "bezel"
http://i112.photobucket.com/albums/n...y/IMAG0196.jpg Cut out the old exhaust hanger to make space for the battery box when it goes in. http://i112.photobucket.com/albums/n...y/IMAG0190.jpg http://i112.photobucket.com/albums/n...y/IMAG0195.jpg Mounted the locating studs/locking pins in the battery compartment cover http://i112.photobucket.com/albums/n...y/IMAG0189.jpg http://i112.photobucket.com/albums/n...y/IMAG0188.jpg And finally I started making some of the cheapest bed rails on the planet. I used some sheetmetal connections, I *think* they are called cletes. Its just a 5 ft long flat folded peice of metal. It has 2 metal folds on the back creating a channel. When combined with some flat headed screws, it creates a "slip on" blind trim. No hardware visible. I have a few test fit here to show proof of concept. I will be doing the others, and they will all get ppainted black or body color, after the rest all gets rhino lined. Although they are fairly thin, at under $4 for a 5ft section, they are easily replaceable. http://i112.photobucket.com/albums/n...y/IMAG0191.jpg http://i112.photobucket.com/albums/n...y/IMAG0193.jpg http://i112.photobucket.com/albums/n...y/IMAG0192.jpg http://i112.photobucket.com/albums/n...y/IMAG0197.jpg |
Re: Br3w City's Project omgwtfbbq
I like those cleets???????? Got any more info or bottom mounting pics of them?
|
All times are GMT -4. The time now is 06:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com