Re: "Slowly but Surely" Big J's build thread...
looks awesome. that is the only one that i have seen that could probably beat the foldout light idea i seen earlier. some guy here in washington has a mod that relocated it behind the fender light using an s-10 gas door hinge and mounting the light to it so when you flip it open inside is your fill cap. thought it was neet but this looks totally factory which is kewl. have been following your thread for a while now. great build.
|
Re: "Slowly but Surely" Big J's build thread...
just curious on your welds do you use gas or flux. ..... is there a big difference in the two i am looking at buying a welder and never done it but seems like it is something i can learn by myself.... which is the best way to go?
|
Re: "Slowly but Surely" Big J's build thread...
That filler door looks factory. Excellent job!
john |
Re: "Slowly but Surely" Big J's build thread...
Way to keep moving ahead, looks really good.
Better aerodynamics too. :hm: |
Re: "Slowly but Surely" Big J's build thread...
Thanks for the compliments fellas.
Quote:
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
lookin good on the body work
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
http://www.seidata.com/~rmosley/rene...ller%20006.jpg |
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
exactly that is flippin awesome i will be doing that to mine more than likely
just got to figure out my front clip problems first seems like the po has some 67-68 peices and some 79-70 peices. It is up to me to figure out which ones are which kinda buggin me right now but i will prevail. |
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
that is as hell of a job there
|
Re: "Slowly but Surely" Big J's build thread...
4 Attachment(s)
Heres tonights fun stuff. Hacked a nice hole for the filler to go through. It'll be fun closing it in. I might just clean it up and make a nice cover that seals really well. Have to think on that one a bit. The 70 filler neck is 2 piece. I may not have to braze anything. Just some trimming to fit. I need to fill in the original inside hole too.
|
Re: "Slowly but Surely" Big J's build thread...
that look like be a big job
|
Re: "Slowly but Surely" Big J's build thread...
just get a factory blazer filler cover it will cover both holes...
hey hugy where you at in bedford, i`m not too far from there,btw post up some pics of your ride. |
Re: "Slowly but Surely" Big J's build thread...
jamie72 am just watchin the pro here i wish i had one
|
Re: "Slowly but Surely" Big J's build thread...
1 Attachment(s)
Quote:
If you want it to still look stock inside, use the original cover, it'll cover everything up like you never did anything. |
Re: "Slowly but Surely" Big J's build thread...
Quote:
I pm'd jamie, he needs to donate one to the cause :lol:. |
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
:lol: just a little bet i like to watch:lol:
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
ill met you sooner or later buddy glad i can make a funny joke
|
Re: "Slowly but Surely" Big J's build thread...
5 Attachment(s)
I picked up some stainless allen head button screws and some clips at the hardware store. The plastic piece cleaned up nice with some simple green. I'm not going to be able to use the stock 70 filler tube. Its all messed up where something has hit it. I tried to straighten it out but no dice, the lid won't screw on right. I'll have to use a different one and do some cutting and brazing. I took a pic to show the differece between the 1 piece 72 filler tube and the 70 2 piece filler tube. I'll also toss in a pic of the other garage project, replacing the pto clutch, main clutch and the throw out bearing in a Leyland 270 tractor. This is what one looks like taken apart in the middle.
|
Re: "Slowly but Surely" Big J's build thread...
now your workin on a tractor ;)to may things going on what wrong with it
|
Re: "Slowly but Surely" Big J's build thread...
5 Attachment(s)
Been a long day.... I finished the filler. For now, lol... I think I may be about an inch low with the tube as it goes under the bed. The only problem I can think of it causing is holding gas. I guess I'll find out, lol... If anyone can think of a reason it might cause an issue, post up and I'll probably go ahead and shorten it. I took the stock filler and cut off the mount. Then made up some tabs and welded them to it. Drilled some holes, slipped on the clips and bolted it up. Instead of using the inbetween rubber hose I welded the two sections together.. I figure a couple less clamps is the way to go. I also painted 2 tractors today, outside in the wind, that was fun..... One was apart and the other was together. They turned out nice for the conditions I had to deal with. I picked up a Sata RP 2000 gun, worked great... I can't wait to shoot some paint in a booth, or at least in the garage, lol....
|
Re: "Slowly but Surely" Big J's build thread...
5 Attachment(s)
more pics....
|
Re: "Slowly but Surely" Big J's build thread...
how did you get that big mark on your hand?? did the paint gun get away from you??:mm:
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
lookin good on the truck big j which fruit are you in the loom :lol::lol:
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
huggybear, welcome to the site, whatcha driving? Start a thread and introduce yourself. :gi: |
Re: "Slowly but Surely" Big J's build thread...
Quote:
Nice work on the truck so far! Now I have three chooses of where to mount my gas door...Big J, VtBlazer or Kyle4381. We should have a poll How'd bryan get his own emoticon:5150::lol::lol: |
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
vtblazer old blue truck:lol: iam watchin the pros here so i can mit learn something :lol:
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
4 Attachment(s)
I got my tires in today!!!! Couldn't wait so I had them mounted/balanced and put them on as soon as I got home from work... 35 12.50 15 BFG MT KO's..... I've got to get a set of matching beauty rings. I've got 2 matching on one side and two matching on the other side, lol...
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
Great looking tires. As I'm sure you know, rotate those tires religiously!
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
them tires look good can we get a pic of the tire the top to see what the tred looks like
|
All times are GMT -4. The time now is 05:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com