Re: '63 GMC Project
 

Creep , make sure you crop the picture real good , theres just too much building and not enough ah.....umm..... truck in the picture.....

Re: '63 GMC Project
 

Thanks.

I think I'll pass on that trade...nice try though
;)

Re: '63 GMC Project
 

Thanks. Right now one fan is wired to run with the truck on and one is wired to kick on when the temp reaches 185 and shut off at 175.

Re: '63 GMC Project
 

That's just a pic I snapped with my phone. I've seen the pics, plenty of "truck" in them. You can see them here; http://www.ecsmagazine.com/Shows/201...11/index9.html

I will post the hi-res copies when I get them.

Re: '63 GMC Project
 

SWEET PICS LOVE THE LAY OUT ON THE TRUCK .How does it ride ..

Re: '63 GMC Project
 

Thanks. The ride is very smooth.

Re: '63 GMC Project
 

I found a couple pics of my truck online from the Goodguys show in Columbus. It was a huge show, over 6,000 vehicles there. If you ever have a chance to go you should.

Re: '63 GMC Project
 

If you missed my other thread, here's some of the pics from the online mag...

Re: '63 GMC Project
 

couple more...

Re: '63 GMC Project
 

and more...

Re: '63 GMC Project
 

she looks good! (and the truck too :lol:) tastefully done....congrats!

Re: '63 GMC Project
 

Thanks:lol:

My buddy took a couple of pics of me rolling home from a local show last night. They're a little blurry but that's to be expected with a cell phone in the dark at 70 mph.

Re: '63 GMC Project
 

never get tired of seeing this one!!!!

Re: '63 GMC Project
 

Very cool truck! definatly a head turner!

Re: '63 GMC Project
 

Thanks guys.

Unfortunately the cruising season is winding down here. Soon I'll be packing her away for the winter. It's gonna suck to not drive it for about 5 months.

Re: '63 GMC Project
 

That truck is sick man! Nice work!

Re: '63 GMC Project
 

Thanks Cort. Am I crazy or did you used to live in Portland OR? I was out there back in Sept and kept an eye out for your 'burb and your old truck.

Re: '63 GMC Project
 

dude I'm living on this thread. I hope to have my '61 laid out by spring. can not wait. your truck is insane :) I'd take it over any new car on the market!

Re: '63 GMC Project
 

Looks great creep.
Posted via Mobile Device

Re: '63 GMC Project
 

Thanks guys! Unfortunately I'm having some trouble with the windshield gasket. Back in June I took it to have the windshield gasket replaced with a new one I got from Classic Parts. It turned out to be extremely twisted and the installer couldn't get the trim pieces back on. So I drove it home without the trim pieces in and it looked horrible. The next week I ordered a new seal from Steele Rubber at the Good Guys show (July 9), it just arrived at my house 2 weeks ago, 4 months later! I dropped the truck off at the installer 4 days ago and called him the next day and he tells me the new gasket is even worse than the old one and he was trying to get the old one back on. He also says I may end up having to order a new gasket without the trim and just not use the trim at all. I am so P.O.ed right now.

Re: '63 GMC Project
 

He just does not want to do it, it is hard to do, let him order the gasket....or get another glass guy....

My glass man told me 150.00 to install a windshield with the chrome trim and he said it was a royal pain in the ass.......and he is a hot rod guy and a friend...(i already have the windshield)

Re: '63 GMC Project
 

Very nice build Creep.
Just finished reading this.

I hope you get your front glass issue worked out because before I get mine back on the road I am going to have to get it done as well. I would like to read up on the issues and what you did to resolve them for this.

Keep on Truckin' man !!

Re: '63 GMC Project
 

True that. When I ordered my gasket it was a continues piece. The glass guy said it sucked and that the ones they use they cut to the length they need.

Re: '63 GMC Project
 

Thanks guys. I still haven't got it back yet. I even called to tell him I didn't have to work today and could run out to give him a hand but he wasn't there and I never heard back. If I don't get it back on Monday I'm seriously thinking of going to get it without the windshield installed but with 40* temps outside I may have to have it trailered.

Re: '63 GMC Project
 

Hmmmmm if it were 40* here I would push my rig outside and wire wheel the whole freekin thing.
Supposed to be between -5* and 5* with chance of snow tomorrow (Saturday).

But enough whining... I hope you get your rig back soon with the job done right too!

Re: '63 GMC Project
 

I finally got my windshield installed. I ended up taking it to another shop but they couldn't get the trim and gasket in either. So I just gave up and had them order me a gasket without the trim and put the windshield back in. And to top things off my truck keeps trying to stall when I come to a stop. I'm thinking it may need a fuel pressure regulator or a bigger carb. The engine builder recommends a 750 cfm but I'm only running a 650 cfm.

Re: '63 GMC Project
 

A 650 should run just fine if it is tuned correctly. It just won't have the top end a 750 would. Is it an Edelbrock or a Holley?

Re: '63 GMC Project
 

It's an Edlebrock 1405 if I remember correctly. I read somewhere that you need to run a fuel pressure regulator but I thought that was only with a mechanical fuel pump. I'm using a Holley red label electric pump.

Re: '63 GMC Project
 

The Edelbrock carbs are extremely sensitive to fuel pressure. In fact that is mentioned in the manual, if you have that. You don't want any more than 5.5psi fuel pressure, at any time. I'm thinking the Holley red pump is putting out too much psi for the Edelbrock.

Re: '63 GMC Project
 

Thanks for the help, Cap.

Re: '63 GMC Project
 

No problem. Let us know if the fuel pressure fixes your issue.

Re: '63 GMC Project
 

Found some more pics of my truck online...

http://i9.photobucket.com/albums/a91...p/DSC01764.jpg
http://i9.photobucket.com/albums/a91...p/DSC01761.jpg
http://i9.photobucket.com/albums/a91...p/DSC01758.jpg
http://i9.photobucket.com/albums/a91...p/DSC01759.jpg
http://i9.photobucket.com/albums/a91...p/DSC01757.jpg
http://i9.photobucket.com/albums/a91...p/DSC01765.jpg

Re: '63 GMC Project
 

badass!

Re: '63 GMC Project
 

Have you still got the parts for the power steering on the 305? Would you like to sell them?

Re: '63 GMC Project
 

Thanks.

For now I think I'm going to hold on the the 305 power steering pump bracket. I want to find another project to put the V6 in. Sorry.

Re: '63 GMC Project
 

No, you're right. I just moved to Victoria in July for school and a girl. My 'burb is still down there, tucked away for the winter but my truck is with it's new owner in FLA.

That really sucks about the windshield man. I am going to be going through this same hassle probably this next summer. I guess I'll have to ask the shop right off the bat if they have experience with them and feel confident they can pull it off. Good luck with it!

Re: '63 GMC Project
 

That's cool man, I hope things work out with everything up there. As for the windshield, I really think the issue was with the gaskets and not the shops.

Found another pic of my truck. This one was in Classic Trucks magazine (thanks for the heads up kart34) but I found a bigger version on their website.

Re: '63 GMC Project
 

thats awsome man!!! always love seeing your ride!! a good inspiration!!

btw any new updates on it? you know a projects never finished

Re: '63 GMC Project
 

Nothing going on yet. It's tucked away for the winter now. I need to figure out why it's wanting to stall and it needs some new exhaust gaskets but thats gonna have to wait 'till spring. I went the day after xmas and fired it up and let it run for a few minutes and I have been jonesin' to drive it since.

Re: '63 GMC Project
 

Hey man love your truck! I can't remember but did you do a body drop at all for it to lay that low?