Re: 1965 chevy truck one piece @a time
4 Attachment(s)
:waah::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
cleaned and sprayed the rear frame tire braces and used bed liner on the parts will see how well it last :smoke:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:sumo::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
adding a little color before seam sealing the joints :ito:
tryed to get all the seams sealed but srewed up and have to resand and paint the lower driver door seam again . trying to rush it :banghead::m6::josh: |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
:chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
couple of pics of the little stuff i did today not much seam sealed a little on the cab and started putting the motor mounts and the calipers on the truck ill put on the lower trailing arms on sunday if i don't have to work :waah:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
slowly starting the build up of the frame . trying to find a good motor head combo wanting to stroke the350 block to a 383 but still thinking B B but not sure whick will be easyer to build with at least 500 hp motor ..:lol::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
slowly starting to put it to gether one part at a time .. mounted the springs on the trailing arms the rearends at the shop putting a true locker in with 3.73 gears . also mouted the stearing up ill mount the box tomarrow and
get the rear under it this week we hope :chevy::metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:sumo:
|
Re: 1965 chevy truck one piece @a time
I really enjoyed your post and photos
|
Re: 1965 chevy truck one piece @a time
Looking Sweet!!!:metal:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
worked on the frame to day have a grease fitting broken off in the lower
a frame was a easy fix with an old flat tip screw driver filed down to use a a easy out and replace oll the fitting . putt the steering back on not sure if its right the stearing rod the tie rods mount to dose not look straight. its angeled a littl bit to much for my liking not sure if i need to use a 70-72 mount and not the 65 that i redrilled on the frame:chevy: ? :uhmk: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:chevy::waah:
|
Re: 1965 chevy truck one piece @a time
You look like your a busy man with lots going on. Your frame is looking good. Nice work!
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just some more one piece @ a time going back to gether :lol:
untill i hit the first snag of the brake lines the whip hose for the rear brakes is not right . the hole need to be bigger and the block need to be square :banghead::m5: it will not mount in the braket on the rear . |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
spent today moving and covering things up . put the frame in the back part of the shop @ moved the cab and the parts ready to prime to the front part of the shop and blocked off the front part of the shop ..
for body and prime work this week . I'm off all week and im planing on hidding in the shop .. hope the weather will work . but theres rain wed and thurs will see . but hopefully i can get some more stuff put back on the truck .:chevy::metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just some progress on whats going on this week off from work :lol::metal:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
would have gotten a little more done today but went out last nite and i feel like :barn::tim::alc:
but will get an early start in the morning next three day in the 70's to low 80's by sunday :metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
got a late start on the cab today so here is what i got done dang finally got primer on the cab and other stuff that been sitting around for a while . i might get some paint on the dash and cab tomarrow maybe wil see what
ill have to prep before painting .. :metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
couple of more dang if i only could have a couple of more weeks off from work and this thing could b done in about a month .:lol:ummmm maybe not :chevy:
|
Re: 1965 chevy truck one piece @a time
Great job getting everything in primer. I would say that's some huge progress.
|
Re: 1965 chevy truck one piece @a time
Nice job on getting the primer all laid out.
I've got the same Penzoil can too. :lol: Diggin the progress. |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a little undercoating and cleaning up today . sprayed the fenderwells
the steps and other pieces |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a few more looks like i might need to touch up the fender wells ater installed can't tell yet :chevy:
|
Re: 1965 chevy truck one piece @a time
Rockin' along...:metal:
|
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
Din't get to work on the truck today to much did get the motor ready to take to
the machine shop next week . going to deck it and up the compression to 11 to 1 will see might sell the 041 heads and get some 58 or 64 cc aluminum Head will see what my buddy doing the work thinks . :metal::chevy: the head in the plastic the ones in front are 642624's not wanting to use them . |
Re: 1965 chevy truck one piece @a time
looks good! Nice work on the paint!
|
Re: 1965 chevy truck one piece @a time
Love all those Comp parts. Vote here for the Aluminum heads you won't regret it.
I see you did some repair on the top above the windshield. Was it difficult? I have some pin holes on the driver side in the same area. Bret |
Re: 1965 chevy truck one piece @a time
Bret on the fix I welded up the area .then skimed it with a little filler and blocked t out . just be care full not to burn the hole bigger chasing the rust. :chevy:
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
:5150:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Been a couple of weeks since last post so here a little update and a surprise at the end to show whats next in the on going build but its a sneek peek .
did some work on the brake lines and the idler arm still not sure if ive got it set were it needs to go . ill have to wait to get the motor and trans set in will see where it goes ..:metal::chevy: and the las pic is the surprise |
Re: 1965 chevy truck one piece @a time
2 Attachment(s)
a couple more of the surprise
can you say shoe horn !!!!:lol::metal::chevy: |
Re: 1965 chevy truck one piece @a time
Awesomeness! Always loved those valve covers.
Bret |
Re: 1965 chevy truck one piece @a time
Thanks Bret . i got a good deal on the motor. it was in a running 70 swb
the owner wanted more power and built a blower motor. it sounds real healthy and it only has 1,800 miles on the motor . so it looks like i'm going to sell off some extra part i've gathered. that was going non air to now having ac in the truck :metal: will start posting some stuff in a couple of weeks that i have extra ... |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
spend the day cleaning paint guns and cleaning the shocks for repaint .
and rounded parts up to take to put the motor and trans together for the frame in a couple of weeks :metal::sumo::chevy: |
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
:ito:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
spend a good day out in the shop . 1 sanded the Big block mount stands
2. sanded and cleaned the door hinges . 3 . painted the inside of the cab . dang i must be sick :lol: Ill have to do some light sanding on the clear .i let some one use my clearing gun and used it for a primer gun :m5: and i didn't check it before hand and sprayed my clear and had some grey flakes in the clear :banghead: so i have the heater going in the shop right now to let it cure out @ 70 deg for 4 hours . shoud be ready about 9.30 pm then wait untill tomarrow to sand and reclear |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
here is more of the cab pics :chevy:
color is gun metal grey :chevy: |
Re: 1965 chevy truck one piece @a time
You've been busy. Even though you're going to re-clear that dash looks smoooooth.
|
Re: 1965 chevy truck one piece @a time
Thanks Bomp i like the stuff you found under the tub and the date 3 14 1953
on the wall with the names on it .. :metal: should be able to take the frame and cab to the shop net week . to get the Big Block and other stuff i got for the truck i e A/C ill lose about a month of working on the truck While boss is off on vacation so i have this Sunday and one more after the next weekend will see what gets done .. :waah::chevy: |
All times are GMT -4. The time now is 02:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com