![]() |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
looks really good. but becareful that braided hose gets pretty hot.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Thanks for the heads up on the line. Could get a little meltage on the gromet :o
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I haven't been able to keep my jaw off the floor since this thread started. Nice work!!!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
been sittin at work in the middle of the night reading all your posts and both builds, and i feel so inept. just the way you think out and solve issues/problems/visions is the work of a true innovator. my friends and family tell me how good i am when they see my work, but i don't think i can hold a candle to you. i have both a 68 swb fleet and a 72 blazer in the works for more than 7 years now, and can't find the time to devote to them, but you are truly the inspiration i need (and a few grand:lol: ) to crank back up. keep it up, we appreciate your work, and watching you do it. maybe i might be able to impress you one day.
i don't want to short change others like Rokclrn, HartRod, and quite a few others as i am equally impressed by every tread they post. they too, are excelllent innovators/thinkers/doers |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
There really are some true talents on this board. It's a huge compliment to be considered among them. I doubt I would have done half the stuff I've done if it weren't for this board :metal: Thanks for the comments. I'll be posting a BIG update soon ;)
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
It's 1:30AM west coast and I literally just walked in from finishing up the rear bags and notch... and I'm driving it to work in the morning--no shocks :lol:
Pics tomorrow! |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
No shocks? :lol: Mine either, rides a li ruff but the ride is priceless :D
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
It was a little bouncy :eek: Shocks are going in today.
I have an issue with the rear floor... It's where the driveshaft wants to be... :( There are a few pics here. More to come. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Ok I've got some catching up to do on progress pics. Here's the rest of the air management:
This is the ECU for the Easy Street digital air management system. I suppose it's meant to be mounted to the frame because they made the harnesses so short you really don't have much choice. Since this is a Burb I was able to find a nice dry spot INSIDE the vehicle to mount it with barely enough slack in the harnesses. Finalized the compressor wiring: http://i6.photobucket.com/albums/y23...g?t=1183505394 Here you can see the ECU and compressor relay: http://i6.photobucket.com/albums/y23...g?t=1183505394 Here it is with the ECU mounted behind the taillight (you can see the top mounting screw): http://i6.photobucket.com/albums/y23...g?t=1183505394 I ran the compressor power and ECU power wires up the D-pillar, in the track above the windows and down the A-pillar. The 12 gauge comp power goes straight to my stereo circuit breaker which is fed by 0-gauge from the batt: http://i6.photobucket.com/albums/y23...g?t=1183505394 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Start on the Notch:
First I removed the shock crossmember (kinda dark, I know): http://i6.photobucket.com/albums/y23...g?t=1183505394 I had previously welded in this crossmember in front of the tank to add frame rigidity. At this point I though about removing it but decided there was no need o take it out. I would just have to make the notch fit around it: http://i6.photobucket.com/albums/y23...g?t=1183505394 Positioning upper plates; I used this bar to set them level in reference to each other: http://i6.photobucket.com/albums/y23...g?t=1183505394 Here's where the driver's side ended up You can see where the frame had to be trimmed to get the inner plate to side flat against the rail: http://i6.photobucket.com/albums/y23...g?t=1183505394 http://i6.photobucket.com/albums/y23...g?t=1183505394 Test fitting the inner plate after making a template and trimming it to fit around that crossmember: http://i6.photobucket.com/albums/y23...g?t=1183505394 Burned it in: http://i6.photobucket.com/albums/y23...g?t=1183505394 Welded the inside as well while I had access: http://i6.photobucket.com/albums/y23...g?t=1183505394 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
:metal: You're kicking ass with this one!:D
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
The passenger side needed a tiny corner cut off to fit in front of that crossmember (sorry no pics of that).
The outer plates were trimmed slightly to match the angles of the lower rails: http://i6.photobucket.com/albums/y23...g?t=1183505394 ...and here the OG frame section is gone and the lower plates are in: http://i6.photobucket.com/albums/y23...g?t=1183505394 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Nice work. Do you have a bender, or do you just use the vise and hammer technique like I would?
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Thanks Krue :D
Pat, it was a pre-made kit from KP Components Link here ...and yes, I do the vice/hammer thing too ;) KP uses a press brake to bend these and they fit very well (all frames are slightly different so they're as close as they can be). Sure I could have made it, but skipping the that headache was well worth the money to me. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
nice work, this is one of the threads that i keep up with, i need to learn how to weld and fabricate as well as you!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Next I cut/drilled the holes for the bags:
POR-15'd the areas where the bags mount (will do rest later): http://s6.photobucket.com/albums/y23...2638Medium.jpg http://s6.photobucket.com/albums/y23...2639Medium.jpg http://s6.photobucket.com/albums/y23...2637Medium.jpg http://s6.photobucket.com/albums/y23...2641Medium.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
You can see in that last pic how close the drive shaft is to the floor :( That's with the axle tube basically sitting where the frame used to be (no lower than without a notch).
So... I'll be making a tunnel including modifying the trailing arm crossmember and two rear floor braces :rolleyes: Because of this I've made some wood blocks to prevent it from going any lower than that for now. http://67-72chevytrucks.com/vboard/a...1&d=1183399701 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Next the cross-brace/bridge/shock-mount:
I stuck with the keep it simple concept and made up this using lower mounts from suicide doors (nice pieces), and some of their studs in a 2x2 at the top: http://s6.photobucket.com/albums/y23...2651Medium.jpg The camera is angled here but the shocks are very close to parallel with the bags (FBSS): http://s6.photobucket.com/albums/y23...2655Medium.jpg The bottom of the right shock is just dirty... I'll get a better shot of this: http://s6.photobucket.com/albums/y23...2653Medium.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
So, without the front bags in yet I set the rear where I think it looks good vs. the front (tiny rake) and snapped some shots. This is pretty close to full lift in the rear :lol: With the current shocks it'll come down about 6" from this point :cool:
http://s6.photobucket.com/albums/y23...2658Medium.jpg http://s6.photobucket.com/albums/y23...2661Medium.jpg Down a little more... Still has a LOT more to go: http://s6.photobucket.com/albums/y23...2669Medium.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
:cool:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Looks awesome!!!!!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
:phat: Are you keeping those wheels? Or are you going to go bigger?
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
20/22 Coy C5 ;)
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Awesome build!! Can't wait to see this one finished.
I have a question on your flip up rear door. How does it latch or lock when it's closed? Thanks & keep up your great work. Brad |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Alright I guess that's a little steep :o The original tailgate latches work just like normal. The gate is basically vertical when they latch just like when it's hinged from the bottom. Simplicity :) |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I can't wait to see it sitting on the ground. Lookin good
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I saw a 65? Chevy panel truck yesterday at the Brothers show & it's owner had made the rear tailgate & window a 1-piece lift-up kinda like what you are doing. He used the stock upper hinges for that make & year of panel. He did say that he had to modify the rain gutter some in the back so the door wouldn't hit it when it opened. Also mentioned the hinges are hard to find.
I know you were thinking of making your own hinges. Thought I would pass this hinge idea to you. Maybe you have already explored this idea. Keep us posted,Brad http://images26.fotki.com/v892/photo...02/b056-vi.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Awesome build! I just spent my entire lunchtime reading this!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
http://67-72chevytrucks.com/vboard/a...1&d=1184172639 http://67-72chevytrucks.com/vboard/a...1&d=1184172639 I'm gonna have to try to get my hands on some of those :) |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
May try to get a repo set if they repo them yet???
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I thought I may have had a line on those hinges for you, but I looked at the old pictures I took and it had barn doors. Sorry
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Man this build just keeps getting better:metal:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Anyone who has read this whole novel knows that this is my daily driver. So, I have to do the major work that takes it down for any period (a day or more) on the weekends. I can't wait to get the front bagged but just can't do it during the work week.
But I do find a few hours here and there on weekdays to knock minor stuff out. So... I decided this had served it's time honorably and deserved a nice retirement: http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 No, not just the cap... http://i6.photobucket.com/albums/y23...g?t=1184213035 ...and not just the filler neck http://i6.photobucket.com/albums/y23...g?t=1184213035 but first let's modify that a little bit. I cut the neck back and drilled a hole in the inner tube so that the vent tube would still function: http://i6.photobucket.com/albums/y23...g?t=1184213035 here's why http://i6.photobucket.com/albums/y23...g?t=1184213035 and that cap is pretty "deep" so it will actually seal around that inner tube; thus the drilled hole http://i6.photobucket.com/albums/y23...g?t=1184213035 The Hagan door assembly I chose puts the cap at a 45* down angle to the side of the vehicle. Since the OG neck is more like 55-60* the tube was cut at the appropriate angle to accommodate: http://i6.photobucket.com/albums/y23...g?t=1184213035 A little protection and she's ready http://i6.photobucket.com/albums/y23...g?t=1184213035 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Next up; prep for the knife:
http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 I wanted to center the door in the stock cap position which meant putting the whole assembly off center. It's this way because the hinge is on one side: http://i6.photobucket.com/albums/y23...g?t=1184213035 I also wanted to avoid disturbing the stock "tunnel" that houses the filler tube. Here it is after drilling out some spot welds and removing the factory filler section http://i6.photobucket.com/albums/y23...g?t=1184213035 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
The door assembly had to be modified a bit to get it to fit in that tunnel:
http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 On top of that I still had to take some material off the right and bottom of the door skin to get the box to fit in the tunnel. So I ended up with gaps on the top and left: http://i6.photobucket.com/albums/y23...g?t=1184213035 The hoses ended up needing to be trimmed back about 1" http://i6.photobucket.com/albums/y23...g?t=1184213035 Here's how it turned out: http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 |
All times are GMT -4. The time now is 11:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com