Re: 1965 LWB Stepside Build
That trans looks beefy. Manuals sure are fun!
|
Re: 1965 LWB Stepside Build
Looking good! I cant wait to see that engine and trany go in.
|
Re: 1965 LWB Stepside Build
Quote:
Im old school and really like the AN fittings and braided lines. It reminds me of my racing days and more importantly I seemed to be able to handle them fairly well. |
Re: 1965 LWB Stepside Build
Quote:
Quote:
Quote:
Quote:
|
Re: 1965 LWB Stepside Build
I bought an 18' piece along with a hand full of fittings and wound up with about a foot left over. that was just from the tank to the fuel pump... You are probably best to go with 25 feet and have plenty..
|
Re: 1965 LWB Stepside Build
Haven't been able to do much lately....it's been so hot outside and I am waiting on a few parts that are backordered. However, late this afternoon, I started taking out the old seam sealer in the drip rail. Got about half finished...hopefully finish tomorrow and wire wheel the ditch, then POR 15 and prime...then put in the new seam sealer... It's not fun cleaning out 50 year old seam sealer.
|
Re: 1965 LWB Stepside Build
3 Attachment(s)
Got the old seam sealer out and finally had a dry day to get the seam sealer in and primed and painted....Had to drill out all 4 drain holes...the PO either put bondo in them or they were clogged from 50 years...either way...drain holes should now help.
|
Re: 1965 LWB Stepside Build
Today is the 4 year anniversary of me buying my truck!:five::ennyd:
|
Re: 1965 LWB Stepside Build
Well congratulations!
|
Re: 1965 LWB Stepside Build
Quote:
CT |
Re: 1965 LWB Stepside Build
Thanks guys...I received my new shifter for the relocation today! So I will get that installed on the transmission this weekend. I hope to get the cab clear coated this weekend also (depending on weather).
|
Re: 1965 LWB Stepside Build
2 Attachment(s)
Got the front and back glass out this weekend. Got all the crud cleaned up from the residue of sealant and dirt ...will get the cab clear coated this week then put the glass back in. Luckily no rust to speak of around the window!
|
Re: 1965 LWB Stepside Build
3 Attachment(s)
I've been on vacation and it was just too hot to work on it much lately, but I finally got the cab sanded and clear coated. I cut and polished the drivers door today. Not perfect, but that's OK with me...I enjoyed clearing it...first time ever clearing/painting a vehicle. Now to do the B pillar and work my way around the truck.
I should get the glass back in later this week or early next week also. Here are a few pictures but I can't get the shine and depth from my phone. |
Re: 1965 LWB Stepside Build
Glad to see you back at it Andy!
I've been wondering where you have been.LOL |
Re: 1965 LWB Stepside Build
1 Attachment(s)
Quote:
Took a picture of the truck tonight...getting the windshield and rear glass installed tomorrow. Can't wait! |
Re: 1965 LWB Stepside Build
3 Attachment(s)
Had the front and rear glass installed today. I bought Precision gaskets and they worked great! The installer said that is what he uses if the customer asks him to buy them. Was stoked to get the glass in...now I don't have to cover it in a tarp every night in case it rains.
Original glass both front and rear..the front glass had original grease markings on it hidden by the gasket...unfortunately I forgot to take a pic...I might have one from when I took the glass out. Also while the glass was being installed I looked up and saw the GoodYear blimp floating by... |
Re: 1965 LWB Stepside Build
Looking great man, very classic color combo too!
|
Re: 1965 LWB Stepside Build
Good to hear that the gaskets worked out good. I didn't even know Goodyear still had a blimp.That is cool. I don't know the last time I have seen a blimp.
|
Re: 1965 LWB Stepside Build
Quote:
Quote:
I hadn't seen a blimp in years either...had forgotten all about them in fact. Was pretty cool actually. |
Re: 1965 LWB Stepside Build
Looking good!
|
Re: 1965 LWB Stepside Build
2 Attachment(s)
Started prepping the bed yesterday to clear coat...the paint was flaking bad on the rail, so I went through to the metal A LOT. Woke up this morning to surface rust...ugh. I sanded again and mixed some clear real quick and used my airbrush to clear the rail so it won't rust while I prep the rest of the bed. I just did one coat more of a seal than anything...but gave me an idea of what it is going to look like...I love it!
|
Re: 1965 LWB Stepside Build
4 Attachment(s)
I feel like I am finally getting the hang of clear coating... Started doing the bed today...Hope to finish tomorrow.
|
Re: 1965 LWB Stepside Build
2 Attachment(s)
Just finished the 3rd coat... A few more pictures...
|
Re: 1965 LWB Stepside Build
3 Attachment(s)
Finished the bed today except for the tailgate.
|
Re: 1965 LWB Stepside Build
1 Attachment(s)
One of the things I never liked about my truck was the PO sprayed in a cheap DIY black textured bed coating. He didn't do enough and it just looked bad IMO. I have been toying around with taking paint stripper and seeing what I can do. I took the tailgate off Saturday and today I put some generic stripper on the TG. I only waited 5 minutes and scraped what you see off. It took off enough to encourage me to do more...so after lunch today, I am going to see what I can take off. I hope I can get enough off to make it look weathered. If it works well enough I am going to tackle the bed sides and any area that has the spray in liner. Wish me luck.
|
Re: 1965 LWB Stepside Build
3 Attachment(s)
Cut and buffed the passenger side of the bed today...sanded from 600 grit to 1500 then buffed with 3M perfect-it 1&2..will use 3 at a later date when the clear has cured more than a few days. Hard to tell in the pictures, but there was a decent amount of orange peel...got all that out and sanded smooth. Lots of work ...but looks great IMO.
|
Re: 1965 LWB Stepside Build
1 Attachment(s)
Was playing around today with some wood for the bed. I burnished it and put polyurethane on it...I think I like it, but not sure...may want to go darker.
|
Re: 1965 LWB Stepside Build
It looks pretty good Andy!
|
Re: 1965 LWB Stepside Build
2 Attachment(s)
Thanks...I am not sold on doing this, but it is fun to play with right now.
I took a second piece of scrap wood and burned it a little darker...sat them side by side in the truck...I think I like the lighter (left one) better. They both have a spray on lacquer finish...I will do a brush on varnish/lacquer, sand and buff when I get to that, but the spray on was easier and I had it on my shelf. :) |
Re: 1965 LWB Stepside Build
I think I like the lighter one better too.
|
Re: 1965 LWB Stepside Build
1 Attachment(s)
OK so my buddy is cutting the wood for my bed...should have it in a month or so...we picked out the wood...walnut. Here is a picture of a rough cut piece he cut as an example. If it all looks like this, I will probably just use a clear poly on it to protect and let the natural color show through.
|
Re: 1965 LWB Stepside Build
2 Attachment(s)
Small things sometimes are the most gratifying...got my mirrors installed today.
|
Re: 1965 LWB Stepside Build
Quote:
|
Re: 1965 LWB Stepside Build
1 Attachment(s)
OK got the engine in this morning...before the hurricane hits next week?? Started raining in the middle before we started...we waited it out and it finished raining for a bit. We got the engine in and as soon as we were tightening the last bolt rain again...put a tarp over the engine and will finish the trans crossmember this week between rain. :)
Will post more pictures later, my wife took a ton...my friend Carl, my son, and I put the engine in...finally and engine!!! |
Re: 1965 LWB Stepside Build
Blimp - reminds me of when I was in Lakehurst NJ inside the Hindenburg blimp hangar. They had the Met Life blimp in there tied down, as I was walking across the hangar I jumped up and grabbed one of the ropes holding it down. Well the thing wasn't as stable as I thought and bounced around. Unknown to me there were people on the other side painting it, I ran off Fast with them screaming and cursing. Thank goodness everyone else was wearing the same uniform. :)
|
Re: 1965 LWB Stepside Build
Quote:
|
Re: 1965 LWB Stepside Build
4 Attachment(s)
Here are a few more shots of putting the engine in...Couldn't have done it without Carl! Used my son for grunt work and muscle...why else do you have kids? :D Even having to wait out the rain, it was a great day.
The pictures: 1. Waiting out the storm 2. Trying to get it in place 3. Discussing how the engine needs to be moved. 4. A dad's watchful eye as my son tightens the bolts |
Re: 1965 LWB Stepside Build
nice build man!
|
Re: 1965 LWB Stepside Build
Quote:
|
Re: 1965 LWB Stepside Build
3 Attachment(s)
OK, so hurricane Dorian skirted us last night...thankfully all we got was some rain and a little wind...35-45 gusts where I live in Savannah. My area was under a "mandatory" evacuation, but I grew up here and this time I decided not to leave. As I was preparing the house and yard for the storm, I found out my truck will not fit in my garage and be able to close the garage!...
Since I just put the engine in I was worried about water...so we put a tarp over the engine and secured it with bungee cords at all places. We also closed part of the tarp into the doors. Put bungees at the top of the tarp over the roof and secured to the frame. Thankfully the tarp didn't move. Here is the bed of the truck in the garage along with other items in the bed and the truck before the storm hit with the tarp and this morning after. Other than the ground being wet, can't tell much difference. |
All times are GMT -4. The time now is 12:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com