Re: Knomadd '71 SWB C-10
Quote:
|
Re: Knomadd '71 SWB C-10
1 Attachment(s)
I have pics of the old stuff...
|
Re: Knomadd '71 SWB C-10
Looks great Duane!!
|
Re: Knomadd '71 SWB C-10
1 Attachment(s)
Here's a close up showing the condition the inner tie rods where in... all the steering parts for that matter.
|
Re: Knomadd '71 SWB C-10
Thanks Kyle.
As for the pics of the new stuff, and truck after alignment... I'll have to take pics when it warms up a bit. I have to wash it... She's filthy! |
Re: Knomadd '71 SWB C-10
Just found this build and am joining in. I live in Katy and have quit a bit of car stuff in my garage. I/E car lift, press, engine hoist, parts washer, etc if you ever need a hand you are welcome to come over.
|
Re: Knomadd '71 SWB C-10
Sweet, thanks for the offer! I might just take you up on that. It's always nice to have an extra hand when needed... so if you need an extra set of hands, let me know and I'll be glad to help out.
I hope I don't bore you too much since this build will be very slow. I plan on driving it a lot while slowly adding or replacing along the way. Thanks for following along. |
Re: Knomadd '71 SWB C-10
1 Attachment(s)
So I washed the truck today. Bought some leather cleaner/conditioner for the tonneau cover and cleaned it up. It turned out pretty clean, but there is still some dirt trapped in the creases. I'll have to get a bucket of soapy water and a brush next time.
I tried to install the Addco sway bar that PB has specifically made for them. Come to find out that my bumper brackets are in the way of mounting the sway bar mounts directly to the frame. I'll have to get the perches in order to mount the sway bar. Oh well... just means I'll have to wait a little longer to get it installed. Oh yeah, pics... went to a small town called Wallis to take some pics. Driven by this place several times and have always thought this would be an awesome backdrop. Enough blab, on to the pics... |
Re: Knomadd '71 SWB C-10
1 Attachment(s)
more
|
Re: Knomadd '71 SWB C-10
Looks great!
|
Re: Knomadd '71 SWB C-10
I don't like how small the pics were so lets try photobucket... (now from "gallery", no more photobucket and their BS!!!)
http://67-72chevytrucks.com/gallery/...ps79131b8e.jpg |
Re: Knomadd '71 SWB C-10
|
Re: Knomadd '71 SWB C-10
Quote:
|
Re: Knomadd '71 SWB C-10
You should of called me!!! I would of came out there and done a photo shoot for you! :lol: truck looks awesome man!!!
|
Re: Knomadd '71 SWB C-10
Got any pics of your sway bar interference area?
I'm not sure I understand the issue? |
Re: Knomadd '71 SWB C-10
3 Attachment(s)
Quote:
Quote:
|
Re: Knomadd '71 SWB C-10
Hmmm,... you might have to trim the bumper bracket a little also.
|
Re: Knomadd '71 SWB C-10
beautiful truck man, I'm in Katy and have been watching your build for awhile. I gotta ask if you know of any good shows etc. to attend. I'm wanting to take mine to lonestar throwdown in February.
|
Re: Knomadd '71 SWB C-10
Very nice pics, hope the drop bracket solves your sway bar issue. If not just do what Keith said and trim the bumper brackets
|
Re: Knomadd '71 SWB C-10
nice pictures
|
Re: Knomadd '71 SWB C-10
Thanks for sharing the pictures. Stance is cool.
|
Re: Knomadd '71 SWB C-10
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Knomadd '71 SWB C-10
1 Attachment(s)
Brackets showed up today. Too bad it's been raining all day and is supposed to continue tomorrow. I guess I'll try for Friday after work, if I'm out before dark :lol:
|
Re: Knomadd '71 SWB C-10
I was able to do some work on the truck today. Got the sway bar installed...
http://67-72chevytrucks.com/gallery/...ps4564aeec.jpg Started to get the rear air bags installed too... http://67-72chevytrucks.com/gallery/...ps042141ba.jpg http://67-72chevytrucks.com/gallery/...ps9e7b59c4.jpg I got everything installed, and lines ran, filled the bags and found that the drivers side wouldn't hold any air. Found the leak in the fitting, so I took it back apart and this is what I found... http://67-72chevytrucks.com/gallery/...psd2d0dbf2.JPG I'm guessing there was something wrong with the threads in the 1/2" x 3/8" (?) adapter. Contacted Travis with ProPerformance to get new fittings sent out. I'll probably get it finished next weekend. |
Re: Knomadd '71 SWB C-10
Travis (Pro Performance) is AWESOME!!! I asked him to send me a bill for the new fitting and adapter so I could replace the damaged pieces and he just sent them to me, no charge! That's awesome customer service! Even little things like that help keep customers like myself coming back. The fittings showed up today, so I should be able to get it back in this weekend and complete my bag install. :metal:
|
Re: Knomadd '71 SWB C-10
Yeah Travis is a great vendor to deal with, nice to hear he took care of it for you.
|
Re: Knomadd '71 SWB C-10
Looking good man! the new bar / brackets look awesome.
|
Re: Knomadd '71 SWB C-10
Thanks guys!
I finished the air bag install today. Here are some pics: Rear valves. Now you see it... http://67-72chevytrucks.com/gallery/...ps345cdfb8.jpg Now you don't... http://67-72chevytrucks.com/gallery/...psd8c2ec00.jpg |
Re: Knomadd '71 SWB C-10
Aired out, sitting on the bump stops...
http://67-72chevytrucks.com/gallery/...psbdafead3.jpg http://67-72chevytrucks.com/gallery/...ps00d69b6c.jpg Front aired out, after alignment. The tires sit in a bit more, as you can see by the marks left by the tires from last time. http://67-72chevytrucks.com/gallery/...ps5a5ccfa5.jpg |
Re: Knomadd '71 SWB C-10
|
Re: Knomadd '71 SWB C-10
Aired out :metal:
http://67-72chevytrucks.com/gallery/...ps0dbe8430.jpg http://67-72chevytrucks.com/gallery/...psaaab235f.jpg http://67-72chevytrucks.com/gallery/...ps441fb6d5.jpg Ride height... http://67-72chevytrucks.com/gallery/...psc704e430.jpg Might have to raise the back a half inch or so. Looks like it's got a load in it. Also need to save for air management. This manual valve thing is nice for the wallet, but not for adjustability. |
Re: Knomadd '71 SWB C-10
That's Sweet!!!!!:metal::metal::metal::metal:
|
Re: Knomadd '71 SWB C-10
Looking good!!
|
Re: Knomadd '71 SWB C-10
Truck is looking great. It does make it tough to go take aired out pictures without air management onboard. Might just carry around one of those 5 gal air tanks so your covered just incase.
|
Re: Knomadd '71 SWB C-10
Very nice work!
|
Re: Knomadd '71 SWB C-10
Quote:
Quote:
Quote:
Quote:
|
Re: Knomadd '71 SWB C-10
Page flip pics
Aired out... http://67-72chevytrucks.com/gallery/...ps441fb6d5.jpg Ride height... http://67-72chevytrucks.com/gallery/...psc704e430.jpg It looks like there is very little difference between riding on bump stops and ride height for the rear. No wonder it's so rough over bumps. :uhmk: |
Re: Knomadd '71 SWB C-10
How much air are you putting in the rear bags?
A bolt-in c-notch looks to be your next purchase,... |
Re: Knomadd '71 SWB C-10
Has about 20-25 psi in that pic. No c-notch yet as I plan on towing once in a while. If I buy a newer pickup to replace my daily, I might go that route... or a full notch. Until that happens, this will be my workhorse.
|
Re: Knomadd '71 SWB C-10
Looks great man.. makes me want to bag my 68
|
All times are GMT -4. The time now is 11:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com