The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 7 of 7 « First 23456 7
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   New member new Project (https://67-72chevytrucks.com/vboard/showthread.php?t=354512)

bmfpeterson 12-05-2011 07:45 PM
Re: New member new Project
 
Man the weather was too cold and wet for me down there! It was an anniversary for my and my lady, so Sorry I didnt come see ya but I will be back dude! I will be back!

richards72chevy 01-12-2012 10:41 PM
Re: New member new Project
 
Quote:
Originally Posted by Ricks' 72C10 (Post 4674588)
Looks like you will be OK, I get 8 and 3/4 inches from pan mount to ground.

The rest of my polyurethane sway bar bushings came in and got them installed.

Car show last Sunday, no other Chevy pickups there to show you.
Right click save thank you!Nice truck.

mcbassin 04-22-2015 02:03 PM
Re: New member new Project
 
What ever became of this truck?
ttt

BigJohn145 04-23-2015 11:31 AM
Re: New member new Project
 
Posted via Mobile Device

HAVNFN 04-23-2015 11:48 AM
Re: New member new Project
 
I found this on-line... RIP fellow C-10 Brother.

http://www.legacy.com/obituaries/azc...?pid=174088887

C10_ustacould 04-23-2015 12:24 PM
Re: New member new Project
 
Sad, seemed like a good guy.

bodydropped68 11-17-2018 09:28 PM
Re: New member new Project
 
Saw your truck today Rick at the Goodguys fall nationals in Scottsdale today looks great. Miss you man but your truck lives on back in the states again

bodydropped68 11-18-2018 11:16 AM
Re: New member new Project
 
1 Attachment(s)
Rick's 72

roastmaster 11-24-2018 12:04 AM
Re: New member new Project
 
1 Attachment(s)
For those who followed this posting and those new to it, We were the ones that bought Ricks truck this last Wednesday. The truck is going to need some TLC but its gone to a good home for it to be done. We hope to finish it out like Rick would have wanted it. Sad your not here to see it done Rick. Your truck lives on.

We will post pictures of the progress from where it was left off.

bodydropped68 11-24-2018 11:40 AM
Re: New member new Project
 
It will be nice to see it rolling around once again :metal:

roastmaster 12-16-2018 05:20 PM
Re: New member new Project
 
1 Attachment(s)
Not much of an update but we had q new roll pan and tailgate put on since the old roll pan got dragged and it bulged out and the tailgate was pretty dented up.

bodydropped68 12-22-2018 11:18 AM
Re: New member new Project
 
Quote:
Originally Posted by roastmaster (Post 8406597)
Not much of an update but we had q new roll pan and tailgate put on since the old roll pan got dragged and it bulged out and the tailgate was pretty dented up.
looking good nice to see the truck gettig some love again :metal::metal::metal:

Sparky dave 12-31-2018 04:41 PM
Re: New member new Project
 
Stunning work! You make the painting look so easy. Spotted a nice toro 5400 mower like mine in your thread there as well. Sorry I’m a mower geek

roastmaster 01-28-2019 12:10 PM
Re: New member new Project
 
4 Attachment(s)
Update post. Since all 4 of the American racing rims were bent and tires were destroyed we had to get new rims. We had these 20" detroit steel wheels laying around and had them powder coated. We had to have the rear end narrowed and new porterbuilt control arms to fit them. Also had a set of Pb hinges put on so we can keep the hood on. Our next step is to clean up the bed. Were thinking about using a toolbox for the accuair.

bodydropped68 01-29-2019 07:24 PM
Re: New member new Project
 
Quote:
Originally Posted by roastmaster (Post 8453001)
Update post. Since all 4 of the American racing rims were bent and tires were destroyed we had to get new rims. We had these 20" detroit steel wheels laying around and had them powder coated. We had to have the rear end narrowed and new porterbuilt control arms to fit them. Also had a set of Pb hinges put on so we can keep the hood on. Our next step is to clean up the bed. Were thinking about using a toolbox for the accuair.
Looking good :metal::metal::metal:


All times are GMT -4. The time now is 01:26 PM.
Page 7 of 7 « First 23456 7
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com