![]() |
Re: 55-57 one piece windows
Quote:
|
Re: 55-57 one piece windows
Hi KingMike! I bought my one piece windows from Brothers, so the wipers came and tracks came with the kit. Still modifications have to be made which you may have read about? I never had the priveledge of riding with the original wings. However my past 57 Chevy Bel-air had them, and I must admit it was nice being able to direct air from outside in. However, I have no regrets as the single glass looks nice and works well!
dne' http://img.photobucket.com/albums/v4...ps58126044.jpg |
Re: 55-57 one piece windows
Here's the '59 we did for a guy in Texas last year. It came out pretty good.
We used the Brother's kit and a lot of help from this forum to get them right. http://i830.photobucket.com/albums/z...ps6ab4e8f5.jpg |
Re: 55-57 one piece windows
has anyone completed this one piece window with the bear claw latches? I seen the video where it might not work? Thanks Tinker
|
Re: 55-57 one piece windows
Mine made it in OK...
http://images2.snapfish.com/23232323...86636345nu0mrj http://images2.snapfish.com/23232323...97%3A345nu0mrj http://images2.snapfish.com/23232323...3A845345nu0mrj Just plan ahead! |
Re: 55-57 one piece windows
Thanks Bob,, I assume you did the windows first, then the bear claw!! make sense!!
Tinker |
Re: 55-57 one piece windows
Quote:
|
Re: 55-57 one piece windows
Hows everybody doing? I just bought a 1955 chevy truck however the top was chopped and came with no windows. Im interested in doing this however I do not have the vent window components in order to re use the track. Anybody know where I can get a track to use?
|
Re: 55-57 one piece windows
You really should read the whole thread, lots of info. If you had you would have seen my post here, http://67-72chevytrucks.com/vboard/s...&postcount=189
about making your own track. |
Re: 55-57 one piece windows
Just want to start by saying a huge thank you for putting this mod together and so in depth. You are truly an asset and inspire me to help out in the truck community more often. I read all ten pages but, could not find a definite answer for my question. Has anyone ran this mod with the trique bolt in bear claw latches successfully? Has Brothers fixed their kits yet?
|
Re: 55-57 one piece windows
I used Trique latches and a Brothers power kit. My build is a few years old but the Brothers kit works really well and had all the components I needed so I guess it's "fixed." The latch is a close fit but works, even on my chopped top.
|
Re: 55-57 one piece windows
I just read the whole thread and watched the vids. I cannot find a mention for the "channel" that you have to weld a 3" extension. Does anyone have a part number or a link?
Found the felt stuff... http://stores.restorationspecialties.com/y630p-96/ http://stores.restorationspecialties.com/mr172x-96/ http://stores.restorationspecialties.com/ym54r-96/ Thanks Hank |
Re: 55-57 one piece windows
1 Attachment(s)
the one in this picture.
|
Re: 55-57 one piece windows
|
Re: 55-57 one piece windows
|
Re: 55-57 one piece windows
Nice half the price^^^
Thanks Hank |
Re: 55-57 one piece windows
I went to order the PDF file on line at Kinko's and all I could seem to order was in a poster format and they wanted $43.00 so I went in and told them what I wanted and it only cost $3.30. Just wanted to let everyone know.
Thanks for this thread everyone. |
Re: 55-57 one piece windows
I also decided to go with power windows. It looks like you don't need that metal "C" channel as it comes with the kit.
http://www.black-ridge.com/el2000-su...-glass-kit.htm |
Re: 55-57 one piece windows
Quote:
Kim |
Re: 55-57 one piece windows
Changed my mind on the regulators, I think I'm going to use Nu-Relic's. The reviews I've read have all been positive and they replace the old regulators lifetime warranty also.
|
Re: 55-57 one piece windows
Quote:
|
Re: 55-57 one piece windows
The file is here
http://www.thehollisterroadcompany.c...ecewindow.html I don't have any install information, I only host the file |
Re: 55-57 one piece windows
Thank you! Very Appreciated!...
|
Re: 55-57 one piece windows
FWIW I used the template and made "glass" with of 1/4" tempered hardboard for mock up and fitting. Later I got a deal on some Brothers Glass another member did not need. The template and Brothers Glass are almost exactly the same, the small variance will be concealed by the U channel.
|
Re: 55-57 one piece windows
blackdiesel;
I know it has been a few years since you posted about the one piece window info; I just got a 57 chevy panel n want to do the one piece window set up. Would like to have the temple n the DVD if you still have the info. Thank You; T-P Auto :chevy: Tim Timothy Ponzer P O Box 3451 Milan, N M 87021 |
Re: 55-57 one piece windows
[QUOTE=T-P Auto;7872833]blackdiesel;
I know it has been a few years since you posted about the one piece window info; I just got a 57 chevy panel n want to do the one piece window set up. Would like to have the temple n the DVD if you still have the info. Hollister has the files, scroll down in this thread about 4-5 replys. |
Re: 55-57 one piece windows
Im doing this mod with the stock regulators for now, just need some roll up windows. maybe change to power later on.
Does anybody have any spare pieces for the window guide add on they'd like to share? Before I buy an entire new set for 6".... or if anybody else needs pieces we can buy one set and divy it up between all of us? |
Re: 55-57 one piece windows
Sorry to rehash an old thread again but what better place than in this thread.
I am about to start this mod on my truck in NZ. Obviously its a bit harder down here with the lack of suppliers but I have a good exporter in LA which helps heaps. I was looking at the extension needed to extend 3" for the channel run. I know its been linked above a number of times but is it the same part as #7 on this page from LMC. I was going to be getting a few small parts (roof skin and visor) from them shortly and thought I might just add it at the same time...... Finally - the 3 links from restorationspecialies - Do I just need 1 of each piece to complete or multiples. Q |
Re: 55-57 one piece windows
Quote:
On the other links you only need 1ea the last number of the part number is 96 meaning it is 96 inches long. |
Re: 55-57 one piece windows
Quote:
Looking at the dimensions its a totally different size ??? |
Re: 55-57 one piece windows
Go to this page and start reading at post #7, it has pictures and explanations...
http://67-72chevytrucks.com/vboard/s...st#post7987617 |
Re: 55-57 one piece windows
Quote:
sent you a pm. |
Re: 55-57 one piece windows
Quote:
Talked with Jeff, he knew exactly what I was doing - there are actually two different felts if you are cutting up and reusing the front division bar as your glass guide. He has all the stuff to make both tracks work RIGHT, no slop! The best customer service Ive had!...... --- Brothers? :ito: |
Re: 55-57 one piece windows
Quote:
|
Re: 55-57 one piece windows
I have a 1955 TF truck converted to one piece side glass. I used the Specialty Power Windows kit and the window run trim from Restoration Specialties part #10M-96-WIN. It requires 2 each. One for each side, these fit perfectly. They come in a long straight piece. You can pre shape them with the glass before it's installed.
The Specialty Power Windows kit comes with a template for the glass shape. The motors in the kit are fast and quiet running like my new Silverado. I have to still order the window felts that attach to the door openings horizontally. Additionally, the Specialty Power Windows kit comes with the forward channels that fit down in the doors, switches and decent instructions to complete a one piece window project and was what I needed as my truck had no existing windows or regulators (you will have to source the glass). |
Re: 55-57 one piece windows
Anyone used Auto City Classic for their one-piece door glass - how did it fit? I'm wanting tinted glass for all pieces and feel like I need to get them from same vendor to get consistent shading. Went through the thread pretty quick and did not see any reference to them. Thanks. -Bob
|
Re: 55-57 one piece windows
Sub'd for reference, I'm doing the install right now. using your tech, its working quite well! thanks!!
|
Re: 55-57 one piece windows
Hi guys, just tried the link for the PDF template and it's saying not found?? anyone else have this issue?
|
Re: 55-57 one piece windows
Quote:
|
Re: 55-57 one piece windows
Looking into it and I think the template is the least of my worries. There just don’t seem to be any suppliers for the felts or channels and shipping seems very expensive from the states. Looks like I’ll be sticking to the quarter window for now :(
Posted via Mobile Device |
All times are GMT -4. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com