Re: Birth of a C10
 

No problem "McMurphy"!

I installed a camero rear swaybar to the trailing arms of my truck so im running rear sway bar , and this style sway bar uses "end links" which is the parts pictured, the ones I got with the swaybar at pick-n-pull were pretty old so I just upgraded to a newer better set....heres a picture:

http://i976.photobucket.com/albums/a...nnz/009-27.jpg

I also wanted to say thank you again for the sending unit you sent me I received it just fine and I appreciate it very much, I had already bought a new one before it arrived but am planning on relocating my tank to the rear at somepoint and may still be able to use it, or if you want me to send it back I can also do that too just let me know!

Re: Birth of a C10
 

Went thrift storing today with the ol' lady and found me a old school steering column flash light for .49 cents, threw a couple battery's into and it works! Now I can replace the repop one I already have, you can notice the difference in quality between them right away when you pick them up.....

.49 cents flash light!
http://i976.photobucket.com/albums/a...nnz/005-47.jpg

repop on the left, old school on the right:
http://i976.photobucket.com/albums/a...nnz/004-42.jpg

repop:
http://i976.photobucket.com/albums/a...nnz/002-59.jpg

Old school:
http://i976.photobucket.com/albums/a...nnz/001-55.jpg

Re: Birth of a C10
 

where did you find the bracket to hold the flash light ..wonder if it will hold a 4 cell maglight

Re: Birth of a C10
 

I got mine at so-cal speed shop down the street from my house, but they sell them on ebay but are a little more expensive:

http://www.ebay.com/itm/OLD-SCHOOL-V...82517b&vxp=mtr

if you type in "steering column flashlight holder" in ebay search you can see a few different styles.....im not sure it would hold the weight of a 4 cell mag light or not,i dont own one but maybe i can borrow a friends and see how it does and let you now....if i remember to do so :lol:

Re: Birth of a C10
 

Thanks for the photo, I dont have a rear sway bar yet. Frankly I am on my way out to the garage right now to cut and weld exhaust ports in my mid frame cross member, then I will be putting my rear end back where it belongs. I think I may call around and see if there is one of those rear sways lying around....
Nah man, keep that sending unit, I wont need it at all.
Sorry it got to you too late !

Re: Birth of a C10
 

looks good man!! makes me want to bag mine sooner than later now :D

Re: Birth of a C10
 

Hey :metal:CHEMLAB:metal:! Glad to see you still coming around these parts! hows your truck coming along?

Not much of a up date just a couple small new items installed nothing serious( one peice at a time right!) and driving the wheels off my truck and using it to haul my scrap metal findings,recyclables, recycling pallets for extra money:

http://i976.photobucket.com/albums/a...ennz/017-6.jpg

the other day went to my car club members house and helped him set up for his b-day party we held in the garage and my truck and his car were the focal point LOL!:

http://i976.photobucket.com/albums/a...ennz/032-5.jpg

http://i976.photobucket.com/albums/a...ennz/038-4.jpg

http://i976.photobucket.com/albums/a...ennz/035-3.jpg

and then one day driving down the freeway my raccoon tail and antenna decided to snap off and take flight , so i ordered a new antenna, glove box door striker, and also a dome light unit from LMC, and bid and won a raccon tail and used glove box door button on EBAY:

http://i976.photobucket.com/albums/a...nnz/001-58.jpg

http://i976.photobucket.com/albums/a...nnz/014-13.jpg

old brittle unit held to cab by packing tape:

http://i976.photobucket.com/albums/a...nnz/002-61.jpg

New unit:

http://i976.photobucket.com/albums/a...ennz/016-9.jpg

First time having a latching glove box door,,,,,,Amazing!

http://i976.photobucket.com/albums/a...nnz/015-11.jpg

Also replaced the starter!

And "Glendale" and I made it out to the "Mala Noche" car show in roseville ca.:
http://i976.photobucket.com/albums/a...nnz/008-30.jpg

Re: Birth of a C10
 

Used my truck as a truck today scrapping metal and recycling pallets!

http://i976.photobucket.com/albums/a...nnz/002-62.jpg

http://i976.photobucket.com/albums/a...nnz/004-44.jpg

http://i976.photobucket.com/albums/a...ennz/017-7.jpg

http://i976.photobucket.com/albums/a...ennz/018-7.jpg

Re: Birth of a C10
 

losthope, your truck looks awesome, it's wrinkles give it some character

Re: Birth of a C10
 

bet that felt great to drive it around again

Re: Birth of a C10
 

trucks looking good man. glad to see it still being put to work.

Re: Birth of a C10
 

:metal: LOL :lol: Everybody asks when im going to body work it and repaint it, but i buiilt it to be my daily driver work truck and I agree with you that the dings and dents and scraps and scratches look just fine to me....I of course will address and fix them here and there as i go but for now she looks beautiful in my eyes...and not scared to scratch it:smoke:

Feels great! Dog also loves riding in it, girls smile and yell at me at stop lights, little kids point and say "look at that" ,and people wave and give me thumbs up!! all and all it feels great and is a load of fun!!

Thanks buddy! thats what i built it for and shes holding up fine so far!

UPDATE ANOTHER DAY SCRAPPING!

Pallets , my stash of clean aluminum,couple motor ballasts , and plastic drums filled with bottles and cans:

http://i976.photobucket.com/albums/a...nnz/001-59.jpg

http://i976.photobucket.com/albums/a...nnz/004-45.jpg

Re: Birth of a C10
 

I think I speak for most of us when I say... I know exactly how you feel!!!!

Re: Birth of a C10
 

Did a garage clean out today and pulled two loads of scrap metal out of it and got to keep alot of good stuff like, wagner hand held paint sprayer, hand tools, bottles jacks , 2 tackle boxs full of fishing gear....etc....etc....rides great with a load and air bags!

She sure is a working truck!:

http://i976.photobucket.com/albums/a...nnz/007-35.jpg

http://i976.photobucket.com/albums/a...nnz/004-46.jpg

http://i976.photobucket.com/albums/a...nnz/009-29.jpg

Re: Birth of a C10
 

No up dates just working the hell out of it using it as a scrapper truck:
http://i976.photobucket.com/albums/a...nnz/002-63.jpg

http://i976.photobucket.com/albums/a...nnz/003-46.jpg

Re: Birth of a C10
 

Hey man, just to let you know I got the box yesterday!
Thank you VERY much for the thought, I super appreciate it!
However, I am finishing up my domelight mod (hopefully today) and I went a total different direction.
I will hold on to this in case I come across someone that needs it, or for my next build !!

Again, thank you very much.
Another reason why this board and the people here rock !!!!!! :metal:

Re: Birth of a C10
 

ya someone has to check on you from time to time :D my truck is pretty much done (minus the bags) and just waiting on my title. started working on my '50 fastback again.

look at you in those pics man, like a modern day Fred Sanford! :lol:

Re: Birth of a C10
 

No problem mcmurphy! Ill keep your address just incase I have some more stuff for later down the road!

LOL I get that alot lately :lol: haha i dont mind its keeping money in my pocket besides my ebay selling and side construction work jobs! and im just glad to be back working and moving compared to last year in a cast and wheel chair!

I would love to see a build thread on the 50 fast back? glad to hear your getting back on it!

Re: Birth of a C10
 

ya i might start one on that other forum page from where im at now... basically from here on is minor body work and paint (going john deere blitz black with it too) and interior.

Re: Birth of a C10
 

Just been busy with hauling metal and and going out of town for Thanks Giving but I did recently pick up a trailer and a tow hitch setup from a couple different friends for free! Trailer is needs some work and going to be used for scrap metal and hauling whatever I need it for , so Ill have a update hopefully with the way I mount the tow hitch behind the flip up license plate idea I have, and besides that I developed so noisy exhaust leaks and a sweating powersteering hose so today was just doing some maintenance on the truck:

http://i976.photobucket.com/albums/a...nnz/001-68.jpg

http://i976.photobucket.com/albums/a...nnz/002-71.jpg

http://i976.photobucket.com/albums/a...nnz/004-49.jpg

Re: Birth of a C10
 

Its raining cats and dogs here, so i took a little ride to richies garage and after playing video games for a couple hours, hanging X-mas lights between a break in the storm, we got busy cutting down and rewelding the tow hitch to fit in between the frame rails so itll bolt in and be behind the license plate in the rear grill/roll pan:
http://i976.photobucket.com/albums/a...ennz/024-6.jpg

http://i976.photobucket.com/albums/a...ennz/019-7.jpg

http://i976.photobucket.com/albums/a...ennz/028-3.jpg

the new unit!:
http://i976.photobucket.com/albums/a...ennz/030-4.jpg

Next up date should be with it bolted in and with a flip up license plate if theres ever a break in the rain thats supposed to last all week!

Re: Birth of a C10
 

is your flip plate going to have springs on it or just a locking bar to keep it up

Re: Birth of a C10
 

Havent figured out exactly what i want to do yet on that, I have to figure out how to make the whole thing flip up easily with the wires for the LED license plate bolts, Ill most likely make a frame the plate bolts to that is held by a pin in the back and when you pull the pin from the rear of the roll pan the frame will flip up from springs in the hinge...

Re: Birth of a C10
 

can't wait to see it

Re: Birth of a C10
 

If you want to make it spring loaded, I have a non-keyed glove box push button that is a spare. You could easily rig it so that pushing the button would release it from the striker plate or flange, and flip up or down for your application.
Let me know if you want it, can have it in the mail to you Monday !!

Re: Birth of a C10
 

thanks mcmurphy!
I think ill find something thall work got a couple ideas already but ill let you know if I need it!


Still havent found the motivation between working out of town and the raining to install the tow hitch, but did get a clear day today! I sell alot of random items on ebay its one of my many part time jobs working for myself, and with some of the extra funds i accumulated in my paypal I decided since its my daily and always parked outside to install the car alarm i won for cheap on ebay, nothing fancy just a 1-way alarm to keep the honest people honest:
http://i976.photobucket.com/albums/a...nnz/007-37.jpg

the install!:
http://i976.photobucket.com/albums/a...nnz/001-72.jpg

modified a dash light socket o fit the red alarm light into the empty "tandum-lock" light hole in the gauge cluster:
http://i976.photobucket.com/albums/a...nnz/002-73.jpg

http://i976.photobucket.com/albums/a...nnz/006-40.jpg

Pretty stoked! was pretty easy to install! need to buy a couple more trigger switchs to set the alarm off, for the hood and pass. door , have it all wired in so the front and rear lights blink when armed and dis-armed, vibration modulate, starter solenoid cut out wired in, only thing i didnt hook up yet is the dome light circuit that flashes, think im going to hook it up to the interior dash/gauge lights instead because on these trucks the dome lights controlled by turning the headlight switch, and Id rather have all the gauge lights flashing instead of just the dome light!

Re: Birth of a C10
 

Hello fellow truckers! I know its been awhile since i posted anything on my truck, truthfully nothing much lately on the truck but using it as a scrap metal truck picking up and hauling loads to the scrap yard...I did make it out to the coffee shop gathering that a few fellows put on every saturday , where a bunch of folks bring there rides and drink coffee and shot the sh!t for a few hours, kinda like a free mini car show every sat:
http://i976.photobucket.com/albums/a...nnz/017-10.jpg

but i have been busy......we ended up buying a 20' fifth wheel as each others xmas gift that the ol' lady and i decided to move into on the side of the inlaws house rent and bill free for a year or so, to save money because we decided to make a goal to move and try somewhere new and decided to move to Chico ca where i have some family and get out of the big city where we have both lived all of our lifes and the 5th wheel move will help us save money and have a little nest egg when we get there and get to our goal faster then trying to rent and save for a move...I lost my driveway way that i work on my rides ,and my shed space and backyard for storing my scrap metal loads, but now have a storage rented for my car and work tools and storing scrap metal, and can use my in laws driveway to do some work on my rides...

I dont know if any of you guys are interested but im going to post some pictures of whats been taking up my time and it is sort of vehicle related:

1982 20' kit fifth wheel ,payed $1200 everything works and only had a few window leaks i had to seal up:
http://i976.photobucket.com/albums/a...z/5thwheel.jpg

http://i976.photobucket.com/albums/a...psdddb63f9.jpg

http://i976.photobucket.com/albums/a...psd76a87d6.jpg

http://i976.photobucket.com/albums/a...ps4ec004c4.jpg

http://i976.photobucket.com/albums/a...ps56707e5e.jpg

http://i976.photobucket.com/albums/a...psbcf37821.jpg

Since it was outdated looking and we plan on living in it for a year or so here in sacramento and most likely transport it to chico and live in it there for awhile (where a trailer space is $330 a month at a park:metal:) i decided i needed to do some minor changes to make it liveable for us, and only a few $100 into the remodel that i used the cleaning deposit from the rental house
to fund.....

first i started by stripping all the fake wood vinyl covering on all the drawers and doors, and kills primering all the wall paneling with multiple coats, then painted them white:
http://i976.photobucket.com/albums/a...ps72309d8e.jpg

then i painted certain walls, and all the drawer faces and doors blue:
http://i976.photobucket.com/albums/a...ps000b5ebd.jpg

http://i976.photobucket.com/albums/a...ps65430284.jpg

then i ripped out the mess of a carpet and installed laminate flooring:
http://i976.photobucket.com/albums/a...ennz/046-2.jpg

http://i976.photobucket.com/albums/a...ennz/044-2.jpg

then i had the tv and electronics crammed at the foot of the bed and decided i needed to build a entertainment stand(before and after pics):
http://i976.photobucket.com/albums/a...nnz/002-74.jpg

http://i976.photobucket.com/albums/a...nnz/004-50.jpg

after:
http://i976.photobucket.com/albums/a...nnz/006-41.jpg

http://i976.photobucket.com/albums/a...nnz/008-31.jpg

then i built a shelve in the kitchen area:
http://i976.photobucket.com/albums/a...nnz/010-26.jpg

http://i976.photobucket.com/albums/a...nnz/011-27.jpg

thats it for now , next up is wallpaper counter top treatment new faucet and finish ripping out the carpet on the stair area and then onto the bathroom, so it might be awhile before i post anything on my truck again but wanted to say hello and that im still here checking in on you guys , and if any body is interested ill continue to post progress pictures on the 5th wheel ,and if not no big ! happy trucking!!

Re: Birth of a C10
 

I remember seeing your grill modification way back when. Even before I started writing my own thread.
Wishing the best on saving moola for the next year. I had to move me and my ex in with my mom yrs back to pay off bills and get a nest egg together. Ya gotta do what ya gotta do.
Will wait patiently for any new news.:metal:

Re: Birth of a C10
 

sounds like a good plan getting the fifth wheel!! u got it looking pretty good already

Re: Birth of a C10
 

are you going to use your truck to pull the fifth wheel ..nice job on the inside it turned out great .it brightened it up big time

Re: Birth of a C10
 

so.... if the house is a rockin' don't botha knockin.....
good luck with the plan...
BTW, maybe a pair of helper springs for that beauty truck of yours might be a good idea with those heavy loads

Re: Birth of a C10
 

Ya i really dont mind living in a trailer ive done it for a few years back and not to bad living next to the inlaws we get along great, but for sure some downfalls living here as far as being able to work on my rides, but it for sure will help getting on our feet .....Good news is my buddy richie and his shop are about 6 houses down and around the corner so I can use his shop for working on bigger projects on my rides!:metal:

Thanks Coulter i think its coming around nicely!

thanks! It has a gooseneck attachment(which is good because i dont have to install a 5th wheel kingpin with the tracks across the bed or remove the tailgate to tow) so im thinking of installing the metal reinforcment plate under the wood bed to the frame and having just small enough holes to bolt the ball and chain hooks in the bed when needed to be able to hook it up and tow short distances here and there around town if need be, for the move to chico ill most likely just pay a transporter to tow it to its new home when the time comes!

Oh hell other women are more then welcome to come a knockin if its rockin......:lol:

it seems to be doing ok so far with heavy loads with just the bags so far ,levels out pretty nice with a decent size load, and to tell you the truth it rides like a dream with some weight in there, your really notice how bumpy the truck rides with airbags after you leave the scrap yard with a empty truck..


Thanks everyone ill try and get something done on the truck sooner or later, but untill then hold down the fort and ill be checkin in!

Re: Birth of a C10
 

We got a small 1978 camper to stay in when we take our leave every year, and parked it on blocks on our 14 acres. It is probably half the size what you have there.
Living with another person in that small a space, you get into a rythm real quick.
We live in ours for only 30 days a year, but we love it, and I have made so many mods to it the wife teases me that we should have gotten a small camper trailer instead.....

Your set up looks really nice man, you certainly are no slouch when it comes to getting work done !!!

Re: Birth of a C10
 

man, you're really transforming that camper...looks much better! sounds like a great plan for saving $$$ as well

Re: Birth of a C10
 

Chico is 80 miles south of me. Let me know if you ever need anything and I'll help if I can. Or if you're up my way and want to bullshoot about trucks, let me know.

Re: Birth of a C10
 

I'll look foward to the updates....Man funny lot rent here is $150. $350 could almost get you in an appartment. It's crazy how from state to state things are different.

Re: Birth of a C10
 

You have a cool truck man! That's what I want to do with my truck and scrap like crazy too.
Posted via Mobile Device

Re: Birth of a C10
 

I bet you are crazy busy right now, but I am going to nominate you for TOTM dude.
You meet the criteria, I think..... LOL

You are the king of innovative repurposing, you at least deserve a look !!!

You can see your nomination here:
http://67-72chevytrucks.com/vboard/s...=1#post5892005

Re: Birth of a C10
 

Wow your to kind , mc murphy! I appreciate the nomination! will be interesting to see how my ol scrap truck does compared to some of those other beauty's if I end up in the final picks! LOL :lol:

Re: Birth of a C10
 

I think that's a great idea. I for one, will vote for you. Even though your style is nothing like mine, I really admire how you pull it together with "what you have". Even in the face of tons of adversity. This kind of build is just what it takes to get me motivated to go work on my own low dollar junk. I just read the entire thread and loved every bit of it. Wish I had half the motivation you do to get stuff done, even tearing into the 5th wheel and making the best of it was really good stuff. Keep up the great work and keep sharing. Wishing you the best of luck not only in TOTM but life in general.