Re: The Snortin' bull
 

That's a great idea, I think I'm gonna have to get myself a classic looking cup holder

Re: The Snortin' bull
 

Got the truck at local long standing shop in the Seattle area.They have been there since 1933. Gettin' the Bull tune dialed in. Aligned and checked over.

Re: The Snortin' bull
 

Even though the cab is tight and rust free.The corner supports had a thud sound to them.They where packed solid with dirt.It bugged for sometime .Both side's now have extra drain's.

Re: The Snortin' bull
 

Having time to rack the truck up in the air has been a relief the whole build had been on the ground.

Re: The Snortin' bull
 

The truck got aligned and preliminary tuned for the break in period. Than will retune the engine after around 500 miles, Got about 65 miles on the clock this week and The Snortin bull had it's first event today.An NSRA inspection day.

Re: The Snortin' bull
 

Got 250 miles on it this past weeks. Doing so tuning and running a wide band to watch tune.,The Snortin' Bull has ball's flat out hual's. Moved the front license plate up, it looked like a tongue hanging out and cuaght the ground often.Parked next to my S-Duty it makes ford's look ugly.

Re: The Snortin' bull
 

It may not be no LS engine though it is a project that did need one.As much as possible was all day's gone by in thought.

Re: The Snortin' bull
 

:metal:

Re: The Snortin' bull
 

.
.

:ito:

.
.

Re: The Snortin' bull
 

I meant to say not a project for an LS style engine as this was all done with old style thought,

Re: The Snortin' bull
 

Got a spare tailgate from a buddy today.I got a plan for it.Not sure what the previous owner was doing with it.Check out the bracket's bolted to it.No pivot's or chain lock tab's.

Re: The Snortin' bull
 

Thank's for the recognition.

Re: The Snortin' bull
 

Thank's for chekin' in to the build.

Re: The Snortin' bull
 

Wonder if he was attempting to make a porch couch out of it? :hmm:

Re: The Snortin' bull
 

Nice truck!

Re: The Snortin' bull
 

Thanks . It's been fun and gettin better. BTW Peart is the man.

Re: The Snortin' bull
 

:) Yes he is! It's too bad he has retired.

Re: The Snortin' bull
 

Been on the road driving for the most part of two week's. Truck is parked out back in the alley behind our shop. Guy's keep seeing it and asking if it's for sale.It make's me fell good to know these rig's we are building are publically liked.

Re: The Snortin' bull
 

Looks great!
Someone asking if your trucks for sale is an ego stroke for sure!

Re: The Snortin' bull
 

Possibly i found it at a buddie's scrap yard in where alot of crafty artsy people live near out in the woods. Thought about all week i dont know what it could of been for?

Re: The Snortin' bull
 

The right door relay to latch was a problem.It kept jambing.In the past if you look hard a sheet metal screw was used to hold the pivot together.This flexed and trapped everbody as it would not release latch. Had to get a new one. At the same putting a lock cylinder in rh o/s handle.

Re: The Snortin' bull
 

That spare tailgate, was it an idea similar to this perhaps?
I saw this and thought it was kind of cool.
Would one way to utilize a bad tailgate.

http://i.imgur.com/ufxEw9d.jpg

Re: The Snortin' bull
 

Ronzo . That is it's future. I was going to use some louver's though this tailgate came along.

Re: The Snortin' bull
 

This is always good news.

Both financially and more importantly..... Emotionally, to know what you have and are doing is noticed.

I think these trucks are definitely getting more attention now.

The tailgate idea is great for your style truck.

I want to find the letters off a Stepside tailgate for the same reason.

Re: The Snortin' bull
 

Without getting to carried away.Just polishing up the rough edge's.Matching some detail's of inside trim. Still keepin' it a bit crusty.

Re: The Snortin' bull
 

Thank's Grizz, I have put a lot of different vehicle's together and this truck on the street's grab's eye's and discussion .I had a fella and his wife block an intersection just to talk about The Snortin' bull.

Re: The Snortin' bull
 

After acquiring a couple sets of aftermarket halogen and hid bulb
housings that sucked and housings poorly made that would not even accept the bulbs .I chose just to put in halogen Phillips bulbs.

Re: The Snortin' bull
 

The truck with almost 500 miles on it now has been for the most part tight and rides and drives nice, The tailgate though over bumps rattle and clanked, I had some leftover sections of inner door weather strip left over that fit the edge of the gate and snugs up to bed, Tacked them on problem solved.I also found putting the chains and hooks inverted helps relieving chain smacking around.

Re: The Snortin' bull
 

The inner faux gate, double take gate is tacked in. Not done .Though look's pretty trick.

Re: The Snortin' bull
 

Sweet:metal:

Re: The Snortin' bull
 

Looks good. I will be doing something similar.

Re: The Snortin' bull
 

Thank's for chekin' in. I went back and forth with possible the louvered panel and than the spare gate came along.I showed a few buddie's the GMC gate stuck.

Re: The Snortin' bull
 

Yeah, that is trick looking.

Re: The Snortin' bull
 

Door lock's. Original right outside handle's had no lock cylinder's .Though in the past some tried to get trick.Check picture's.It didn't work. In the month of driving to much attention is occurring. New lock's in both handle's . And a new relay rod now also in left door.

Re: The Snortin' bull
 

1960 gmc

Re: The Snortin' bull
 

You are really getting the little details just right.

That faux tailgate is great.

Did a new fuel line for my truck yesterday.

Re: The Snortin' bull
 

A little shake down today.Jacked up and tightened up and check of the underpinnings.Nothin' found major. Did find a backed off tie rod sleeve jamb nut.

Re: The Snortin' bull
 

After a some higher heat temp's and a lot of Seattle rain the bed wood moved and curved up and down,Added a couple of extra anodized aluminum strap's and all good.

Re: The Snortin' bull
 

:clap::thumbs::clap:

Re: The Snortin' bull
 

I got a CPP frt sway kit. good value $ wise. 1.75 dia . Not going to use all part's though should work out for front susp.