|
Re: What did you do to your truck today!
I finally got an opportunity to drive it in the snow.
|
Re: What did you do to your truck today!
Went and saw it at the shop, and after 6 weeks, the Interior Renovation is almost complete!!!!!!!!!!!!!!!!!!!!:metal:
|
Re: What did you do to your truck today!
Got the engine back in and running Tuesday night, took it for about a mile ride and put it back in the shop. Wednesday, took the complete rearend out, trailing arms,shocks and springs, and trailing arm crossmember. Today, I mock it all back up with the Porterbuilt crossmember and trailing arms, figure the coil-over shock mounting setup, make a template for the C-notch, and get stuff ready for powdercoating! That's about it!
|
Re: What did you do to your truck today!
2 Attachment(s)
let it warm up and pulled the poor thing outside in the freezing cold.... my poor truck now its prabably upset with me... We got so much snow it had to come out to put the wifes convertable camaro away...
Sounded so good yesterday i had to go out and warm it up and move it around some more... giggle giggle like a kid with a new toy... |
Re: What did you do to your truck today!
1 Attachment(s)
Got my 2/4 drop installed. This weekend I will have the exhast all done. I will post pic's. It was a bit of wind so when I will get new pic's when it gets better outside.
|
Re: What did you do to your truck today!
1 Attachment(s)
It's cold around here. I just stopped by the shop for a minute (at my daughter and son-in-law's place around the corner)
and installed the new air cleaner the Little Woman gave me for Hallmark Valentine's Day. It's coming along. Another six or ten years, I should be done. |
Re: What did you do to your truck today!
1 Attachment(s)
|
Re: What did you do to your truck today!
^^^ Hey brand and part number are those headers? They look awesome!
|
Re: What did you do to your truck today!
2 Attachment(s)
Quote:
|
Re: What did you do to your truck today!
the wiring inside my truck under the dash, and charged my battery.:uhmk:
|
Re: What did you do to your truck today!
installed a fan shroud on the 67
|
Re: What did you do to your truck today!
Installed the front sway bar with ECE drop mounts and polygraphite bushings. Very nice and easy with TXfirefighers FAQ. Worked on the rear drums. Got one side done. I will finish up the other side tomorrow. Then I will be done with these PITA drum brakes.
|
Re: What did you do to your truck today!
That engine is gonna be sharp Magwa.
|
Re: What did you do to your truck today!
I covered mine is dust but the weather looks pretty good so maybe I can get the dual electric fans installed.
|
Re: What did you do to your truck today!
Finished the rear brakes, buttoned her up and drove her down to the local shop for a full alignment. My two boys drove with me and they loved it. It really does handle 100% better with the new springs and a swaybar.
|
Re: What did you do to your truck today!
3 Attachment(s)
started to make a frame for my cab..
|
Re: What did you do to your truck today!
Got my chassis completely ready to go to the sandblaster. Whew! Gonna send the cross-members (engine and trans), the trailing arms and the control arms (U & L), too. Pix, later.
|
Re: What did you do to your truck today!
went to load fresh pics of my new 3/4 ton to my album and found out I no longer have an album. cheers, Pat
|
Re: What did you do to your truck today!
3 Attachment(s)
pulled the bench seat out so i could look at the gas tank so i know what line i need to modify for my tpi conversion and make room for my buddy buckets that will be going back in. i also siphoned off about 4 gallons of gas to put in my tahoe since its running a tad low. here's a photo of the driver's floor pan. also can anyone tell me what these lines do or what they are for??
|
Re: What did you do to your truck today!
oh and i found the gas pedal pad under the old bench seat so i reinstalled it on the gas pedal
|
Re: What did you do to your truck today!
Finished welding up the c-notch, and boxing that rear section.Welded lower coil-over shock mounts to the rearend, and installed top crossmember and upper shock tabs. Realized I'm going to have to modify Porterbuilt crossmember for driveshaft clearance. That's it for today.
|
Re: What did you do to your truck today!
3 Attachment(s)
Got my dash panel sanded and primed along with the glove box door and reattached it, did a little slicking to the roof, looking to shoot total cab this week.:metal:
|
Re: What did you do to your truck today!
Well, I drove my Blazer today!! Had a place to go, and drove my old girl about 75 miles. Trouble free, and the country music just a KICKIN! I had a great ride.
|
Re: What did you do to your truck today!
Finished a week's worth blazer fun:
Installed new intake Installed new (rebuilt) quadrajet Installed new heate core Finally installed new glovebox. (hadn't had one in years) Funny thing is I got it all done and it even runs. |
Re: What did you do to your truck today!
Took out the clutch in my '67 C10 and found a 9" disk with a 10" plate. Doh
|
| All times are GMT -4. The time now is 06:17 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com