![]() |
Re: Project Vitamin C-10
Quote:
Just need some time to work on it. Its' still snowing here not a lot but it still is. The roads have cleared up at least in the front of my house. |
Re: Project Vitamin C-10
1 Attachment(s)
Happy New Year everyone.
No progress. :waah: But I did get my hounds tooth fabric. |
Re: Project Vitamin C-10
Great looking fabric Alan does it come in other colors like beige and brown?...Vernski:lol:
|
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
That fabric is crazy looking !
Perfect. -W |
Re: Project Vitamin C-10
Quote:
Quote:
Quote:
:thumbs: Thanks Woogeroo!! |
Re: Project Vitamin C-10
Very nice progress. I envy you having access to that lift. I know what you mean about the knees and back. Make working on the lower parts of the bed sides a lot more enjoyable.
Fabric looks great. |
Re: Project Vitamin C-10
What are you smokin'? :haha: Thanks I think it looks awesome as well.
Don't smoke anything, but just had a nice Seven & Seven..:alc: |
Re: Project Vitamin C-10
Alan,
I've really enjoyed reading through your build. I've learned a lot, and it's provided me with some great motivation. Keep up the good work! |
Re: Project Vitamin C-10
nice progress Alan!
|
Re: Project Vitamin C-10
Happy new year Alan.Its only the 8th so I can still say that.
Is this the year for you to complete the Vitamin? |
Re: Project Vitamin C-10
Hey Alan Great progress.
When you decide where you are going to have the upholstery work done let us (or just me) know how you like it. I'm hoping to have my buckets covered before July. I looked online and there is a place near dixie speedway in Woodstock that has had some good reviews. I plan on going by there one day to get a quote. |
Re: Project Vitamin C-10
2 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Quote:
Not much progress, but I did install a new passenger regulator in a repop door. It bolted right up. I still need to buy a drivers side. I can't hardly move in the shop right now. After 10 years of use it is time to rebuild the riding mower. I'm fighting the temptation of restoring it. It's a sickness. I was cleaning the deck and was thinking.....Hey I can sand blast it and powder coat it.................Nah, just clean it up and put it back together. Then I was thinking hay I can paint the body. That might happen. Then today I was thinking I could practice fabbing up a hood scoop. Dang, my mind creates more work than I need. :lol: Trying to decide on the details of the seat. The picture below is something I had in mind. Now think of this seam on black vinyl with orange thread. Also thinking of a welt like old school. I think the orange stitch in black will really pop and accent the hounds tooth. I'll also have the buttons covered in black. The buttons will be in the hounds tooth like the 69 camaro. |
Re: Project Vitamin C-10
You could put air bags on the mower and that would be how you adjust the height you cut the grass.;)
|
Re: Project Vitamin C-10
Quote:
Now I'm in an area that I'm not very good at.................electrical. I had the old harness from the Impala. http://i606.photobucket.com/albums/t...l/DSC03537.jpg I have some old gauges laying around and the schematic from Lakeroadster. I thought why not mock it up and see how the factory did it. I stripped away everything that wasn't needed. This is what was left. Yes, I am using new wire, just trying to get a mental pic of what I need to do. It might be a waste of time for some, but helpful to me. ;):lol: http://i606.photobucket.com/albums/t...l/DSC03538.jpg I've done a little searching to try to find some dash light sockets. Anybody know right off hand where I could get these or suitable sub? They are a 5/8" round hole. It seems like it would be easy to find. These are a single wire, but I think a 2 wire might be better as far as the grounds go. But that just means more wires to deal with. I'll just see whats available. http://i606.photobucket.com/albums/t...l/DSC03539.jpg I have to go back thru my thread to find the electrical supplier that I and others posted. Since the gauge pods are in three pieces I want to create a quick disconnect for each pod. The speedo has 5 lights running to it. They are the turn indicators, high beam and dash light. A 5 pin quick disconnect will take care of it. Any pointers and suggestions are always helpful. |
Re: Project Vitamin C-10
Maybe contact Painless, or Ron Francis Wiring. See if they can make a plug in harness for for only the dash. Just an idea. :chevy:
|
Re: Project Vitamin C-10
I found out the name and number on the sockets "Universal 5/8 Snap-in Miniature Base Light Socket 8524".
http://www.oemsurplus911.com/automot...ckets/8524.jpg There are numerous places for the weatherpack connectors, just have to decide where to order from. Along with that there are so many different ones to choose from here is a link that discribes all types. Anybody have a favorite one they use? Does anyone have a cheat sheet as far as what gauge wire to run in the different circuits? Example pics. (I will be getting a complete kit with seals and terminals.) http://www.whiteproducts.com/images/...PT-4SQ-203.jpg http://www.whiteproducts.com/images/...PS-4SQ-203.jpg |
Re: Project Vitamin C-10
|
Re: Project Vitamin C-10
Alan check out www.wiringproducts.com You might find something there you cant live without.
If I was to get a painless wiring harness again I wouldn't buy the one that's made direct for our trucks. It's overpriced and you still have to put all the eletrical ends on it. Yes it's easier since the wires are already ran to where they need to go, But to save $200 on a harness and spend maybe 2 hours more on it is worth it. |
Re: Project Vitamin C-10
I glad I have you to follow.;)
|
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
Alan,
O'Reilly has both one & two wire gauge light kits: part # GA50 (1 wire) by BWD & # 3211 (2 wire) by Auto Meter. You might check-out the Classic LED stuff at: www.uapac.com Enjoy watching you work...... Danny :chevy: |
Re: Project Vitamin C-10
3 Attachment(s)
Quote:
Quote:
Quote:
Quote:
We had 5" of snow here. Now it has turned to ice. Atlanta has been shut down for 2 days now. School is out again tomorrow as well. http://i606.photobucket.com/albums/t...2/DSC_0005.jpg I pulled out my Highway 22 kit to see what is in it as far as guage connections go. I pulled out the instructions and their diagram is almost identical to mine. I have to make a couple changes since the turn indictors and high beam are in the speedo. I'll have to add some QD's for the seperate pods. My far left gauge has oil/gen/e brake idiot lights. Next is the temp gauge. Then the speedo. Fuel gauge and then clock. |
Re: Project Vitamin C-10
Kewl!! :metal:
|
Re: Project Vitamin C-10
Since I'm not an electrical guru, I have a question. The black ground wire coming out of the #9 QD doesn't tie to anything. It shows ground points at the gauges but not physically tied to them. What do I do here. I'm thinking just ground it to the dash frame. The gauges are grounded thru the mounts from GM. Suggestions......
|
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
I need to see the whole diagram. Remember that where ever you put that ground it has to be screwed to a non painted surface.
|
Re: Project Vitamin C-10
The black wire coming out of #9 shows to be grounded at each gauge. Where does the black line go to the right of the gauges in the picture? You cut off that side...
|
Re: Project Vitamin C-10
Quote:
Posted via Mobile Device |
Re: Project Vitamin C-10
Does this help?
http://www.59classicchevy.com/images...agram-8-sm.jpg |
Re: Project Vitamin C-10
Alan,
My guess, (without physically looking at gauge cluster), would be that with the ground ending at the tach, the tach is mounted in the clusted making contact with 'bare' metal as will all of the other gauges when also mounted. Attaching the ground wire to the dash frame will accomplish the same completed ground circuit. IMO you're more of a 'Lectro Guru' than you thought. As long as the negative post on the battery is attached to the vehicle's frame, the body is making a good metal to metal contact to the frame and the dash has a metal contact to the body the circuit is complete. I have seen 18 wheelers run several thousand mile before experiencing computor module malfunctions due to painted ground terminals. Like Strodder said...:blah::blah::blah: |
Re: Project Vitamin C-10
Hi. Just joined the forum the other day and read every post in this thread. Three days later, I'm done. Truck is awesome. I just got my first one last weekend. It is a 60 short step. But it was free and almost no rust besides cab floor and door. Rockers look good. Hope to get the kind of detail you have into mine. As far as connectors go, we use those weather packs all the time here at work. No real problems as far as i know. Thanks for the step by step your whole way through this biuld. Keep it up.
- Chris |
Re: Project Vitamin C-10
Quote:
Quote:
Quote:
Looking at the diagram that Strodder posted I'm confused. The tan wires that come from Gen/Oil idiot lights and the temp and fuel gauge all tie together and run to the resistance wire on the coil. I'm confused....... The american wire kit has a real oil press and volt meter. I will be running idiot lights for the Gen/oil. I would like to run a gauge, but I'm trying to keep the original look of the impala dash. Trying to figure out how I need to modify the new harness to make this happen. The tan wire to the coil is really confusing me. Now that I think about it could it be a power feed????? The tan wire like I said before ties into several gauges. for instance the oil pressure idiot light has 2 wires. One is tan and the other is a dark blue that goes to the sending unit on the impala harness. It has to get it's power from some where and it wouldn't be getting it from the sending unit. So to me that means it's getting it's power from the coil. The light will come on when key is turned on because the sending unit is making contact. Once the engine is started the oil pressure breaks continuity in the sending unit which in turn turns the light out. Am I thinking right?? If that is true then how does the gen light work? It ties to the tan wire to the coil and also ties to the gen. That would equal 2 positives. :uhmk: Where would I connect the wire on the alt? Just a few of the many questions to come. |
Re: Project Vitamin C-10
I think I'll be happy if I get my key ignition switch to work.:lol:
|
Re: Project Vitamin C-10
Hey Alan,
When the key is turned on the alternator warning lamp current flows from the power source at the coil through the warning lamp, through the resisters, transistors and field coil of the alternator, then to ground causing the lamp to illuminate. Once the alternator is at full output, voltage from the diode trio, also applied to terminal 1, equals the battery voltage. So, with 12 volts on both sides the of the lamp there is no path to ground and the light goes out. Danny |
Re: Project Vitamin C-10
Damn, it sounds good to me. I think he knows he electrial.:lol:
|
Re: Project Vitamin C-10
Quote:
|
Re: Project Vitamin C-10
|
Re: Project Vitamin C-10
2 Attachment(s)
Quote:
Quote:
Been working on drawing my own schematic for my application. This is pod #1 housing the Gen/Oil and ebrake idiot lights and temp gauge. The QD's will be added to the American wire harness so I can disconnect the individual pods. Am I on the right track? |
Re: Project Vitamin C-10
Quote:
|
All times are GMT -4. The time now is 03:19 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com