Re: What did you do to your truck today?
 

^ Wow, that's looking great Tazattitude ! All I got done truckwise today was to get home early enough to sign for my UPS parts delivery. haha

Re: What did you do to your truck today?
 

finished painting the wheels and broke a stud off the front.put the seat in to mock up the seat belts and found out the buckle portion is to short.Drove it down the block and discovered the vacuum modulator is not working.Also discovered that the throttle linkage will hang wot.

Re: What did you do to your truck today?
 

We are working on painting the cab as well then look what came in the mail. Sun tachometer and Sun Bat-o-meter.................looks like we will be sending the dash off to the vacuum plater next week.

http://kieth.smugmug.com/Trucks/66-G...050_EkomE-A-LB

Re: What did you do to your truck today?
 

ripped out old carpet and bolted the seat down and tightened some of the bell housing bolts

Re: What did you do to your truck today?
 

That is going to look very cool when it's all put together.

Re: What did you do to your truck today?
 

Had mine in for a little minor plastic surgery. And by plastic, I mean sheet metal. Finally had the bed sides worked out at the back from where the old wraparound farmer bumper caved it in, and new front fender halves thanks to the old owner glued a patch panel over the rust. I'm going to have to figure out how to paint it to look more-or-less original now. Eeek! This is the first really major work I've ever had done to this truck in all the years I owned it. I was always scared to do it, and finally found a guy that I thought did a pretty good job.

http://i66.photobucket.com/albums/h2...ndersSized.jpg

Now I'm on a serious search to find some brackets to make my dual spotlights mount up right. Suggestions are certainly welcome!

Re: What did you do to your truck today?
 

You may want to take a look at the following thread for the details of the job, and check with Bob at Accessoryland. He actually had a couple of outside and inside brackets available a few months ago.

http://67-72chevytrucks.com/vboard/s...d.php?t=401449

The outside brackets are essential to the install. If the inside brackets are unavailable, the standard clamp type will work just fine as shown in the thread above. His website use to come up on a Google search but I'm not finding it now. I find two phone numbers listed: 563.556.5482 and 319.556.5482. (Perhaps they had a recent area code split).

It's a mom and pop outfit so he's a little slow to respond sometimes, but has always come through for me. I believe he is the only antique parts dealer with open access to the Unity warehouse and inventory.

Re: What did you do to your truck today?
 

Thanks! I called the guy, and he seemed pretty helpful. He's supposed to call me back later this week with the 4-11.

Re: What did you do to your truck today?
 

Well the Right front fender on my gmc was toast, so we cut two fenders in half and used the good parts from each to make one good one....saved $250.00 and for rookies it turned out ok....let me know what you think.

http://kieth.smugmug.com/Trucks/66-G...29249108_8cu3c

after you enter the gallery just click on next in the upper middle of the screen, the pictures jump to the next page before you see the final result.

:gmc2: Kieth

Re: What did you do to your truck today?
 

Nuttin' wrong with that!

Re: What did you do to your truck today?
 

Stopped by the painters today and got some quick shots of the doors that are getting close to paint.

Re: What did you do to your truck today?
 

jbgroby is there a way to fix the flat wiring plate behind the GMC speedometer and other gages?

Re: What did you do to your truck today?
 

Pulled the engine and front end out of my truck. Found out the reason my turbo 350 stopped shifting. The rubber vaccum line got against the exhaust and melted in two! So, now I have a good tranny along with the motor. Pulling the Engine, Transmission, and entire front suspension only took 3 hrs. I couldn't believe it wen that fast.

Re: What did you do to your truck today?
 

Yes, Because no one will see it you can resolder or put jumpers then a clear coat to seal the copper conduit. DO you need a plug/socket I have two spare that I will not be using.

Re: What did you do to your truck today?
 

Well I finally found a good Big Window Cab for my 1966 Factory 4WD.

The Cab has been setting down in El Cajon, CA since 2003 and hasnt been registered since 1993.

It is a 1964 Big Window C30 with Factory Gauges, Heater Delete and Radio Delete with all the original parts still in place.

We are going to pull all the rest apart and remove the body for Media Blasting this next week.

Once back from the Media Blasting we will do any needed metal work before it gets sealed in DP90.

This is the truck I am doing 1966 K20 Factory 4WD that I am adding 1 1/4 Ton D60 Front Axle and 1 ton Van 14 Bolt Rear Axle.

http://i3.photobucket.com/albums/y80...0/IMG_0400.jpg

This is the Big Window Cab I am going to start with. I stripped the interior today, she came apart real easy.

She was left in Yellow Primer for 8 years in a guys back yard. I wish I could have found her 8 years ago as she would have been perfect.

She is real straight and almost completely rust free other then the small spots on the floors from setting so long without a back window.

http://i3.photobucket.com/albums/y80...b/IMG_0103.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0104.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0105.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0106.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0107.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0108.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0109.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0110.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0111.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0112.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0113.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0114.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0115.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0116.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0117.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0118.jpg

Re: What did you do to your truck today?
 

Changed out my 1 1/2 inch dropped springs and replaced them with 2 inch dropped springs. Back when the front sheetmetal was still on it did not sit the way I wanted it to. So now it is lowered 4 1/2 inches in front instead of 4 inches. This is also the first big job my son helped me with. I hel the spring in place and let him operate the jack. Good day all around.

Re: What did you do to your truck today?
 

It’s great when you can involve your kids. My oldest son started in the garage early in life, passing wrenches or just hanging out. By the time he was 15 he had become such a dependable apprentice I’d have him button up the bottom of my engines and never needed to double check his work.

Re: What did you do to your truck today?
 

Finally got some paint down on cab interior 6 weeks ago:

Re: What did you do to your truck today?
 

fabbed up new brackets for center jump seat - funny part of the story: I set my pants on fire with the cutoff wheel on the grinder (note to idiot self: stand to the side when grinding)

Re: What did you do to your truck today?
 

posted mine on craigs list lastnight. at a low price so it will go away. i want to finish my plymouth...

Re: What did you do to your truck today?
 

Picked up my 5.3\4L60e
Posted via Mobile Device

Re: What did you do to your truck today?
 

Removed the black rattle can paint of the hood and bed, found original patina and paint underneath.
Before
http://i24.photobucket.com/albums/c9...3-16181728.jpg
After
http://i24.photobucket.com/albums/c9...3-30193948.jpg

Re: What did you do to your truck today?
 

We still have a few days of work on the cab in preperation for Media Blasting. I will keep the pictures coming as promised!

Cab on the new rolling stand

http://i3.photobucket.com/albums/y80...b/IMG_0120.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0121.jpg

Parts prepared for Powdercoat

http://i3.photobucket.com/albums/y80...b/IMG_0122.jpg

Parts prepared for Media Blasting

http://i3.photobucket.com/albums/y80...b/IMG_0123.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0124.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0126.jpg

http://i3.photobucket.com/albums/y80...b/IMG_0125.jpg

Re: What did you do to your truck today?
 

Man that truck looks good!
Posted via Mobile Device

Re: What did you do to your truck today?
 

yesterday i finished the door reseal and assembled the doors,resealed the rear window,reinstalled the radio,put weatherstrip on the driver door opening.Waiting for the glass guy to install my windshield and off to the inspection station.

Re: What did you do to your truck today?
 

Went to the quarter car wash today and gave her a bath for the first time in 6 months. Did the best I could to blow off all the crud that use to be hidden by the inner fenders. I’m curious to see how much of the shiny POR-15 remains intact on the control arms and crossmember, but further clean up and detailing will have to wait for better weather. The last picture shows what it looked like before installation many years ago.

http://img841.imageshack.us/img841/4071/post01.jpg

http://img864.imageshack.us/img864/7445/post02.jpg

http://img84.imageshack.us/img84/7816/post03.jpg

http://img864.imageshack.us/img864/2065/002rou.jpg

Re: What did you do to your truck today?
 

i refit and sealed my tonneau cover, now it's ready for some tuck and roll.

Re: What did you do to your truck today?
 

well not today but just finished up over the past couple weeks in time for a parade tomorrow and cruise in tonight.

new seatbelts, kickpanels,carpet, and got my seat reupholstered

Re: What did you do to your truck today?
 

got a new fuel gauge from the truck shop, but the back plate was a different shape, behind the dash it didnt fit good so i changed the back plate off my old one. wonder if anybody else had this problem.....looks 100% better and works like a champ now. next project is to finish the oak bed.

Re: What did you do to your truck today?
 

Chome center dust caps.

$5 find on Ebay.

http://i166.photobucket.com/albums/u...lCenterCap.jpg

Re: What did you do to your truck today?
 

Just finished installing the wood floor after cutting and routering it.http://i1089.photobucket.com/albums/...322_183454.jpg[
Posted via Mobile Device

Re: What did you do to your truck today?
 

More progress. Painted the new fenders, new moldings, 2" drop, original style hubcaps. Things are happenin' now!

http://i66.photobucket.com/albums/h2...gressSized.jpg

Re: What did you do to your truck today?
 

Nice looking truck.


Finally getting paint down on my '62. Interior is done, doors done, top of cab is done in cameo white. Next up is cab, fenders, cowl vent, grill, bumpers, etc., etc.

It's a long haul....

Re: What did you do to your truck today?
 

[quote=greg65;4580053]Changed out my 1 1/2 inch dropped springs and replaced them with 2 inch dropped springs. Back when the front sheetmetal was still on it did not sit the way I wanted it to. So now it is lowered 4 1/2 inches in front instead of 4 inches. This is also the first big job my son helped me with. I hel the spring in place and let him operate the jack. Good day all around.[/quot

Ooooooooooooooooops. I did something wrong.

Re: What did you do to your truck today?
 

roughed out new gauge panel - 1/8" masonite base, plan to cover it with the same tan leather I'll use for door panels later, probably repaint the bezel a satin black

Re: What did you do to your truck today?
 

the t5 got a custom shifter....

Re: What did you do to your truck today?
 

Installed the main power feed wire harness, VR, horn, horn relay.

Re: What did you do to your truck today?
 

Started the Wiring process. Mounted the fuse block and routed the wires for the Engine, tail lights and dash stuff. Will stop there as I need some help trying to figure out how to wire in the stuff.

Re: What did you do to your truck today?
 

Hey Mark have you ever noticed whether or not your truck had run cooler without your front fender wells...?

Re: What did you do to your truck today?
 

Removed the windshield, started stripping down the dash. Did a little sanding on the rear fenders. Tried to convince wifey I REALLY need to buy this sweet 56 chevy I found. Guess which thing didn't go over well in the Hill household...:gmc2: