The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

skysoldier173rd 08-26-2010 08:17 PM

Re: What did you do to your truck today?
 
Built and installed a crossmember for the 700R4 trans I installed along with a 350 last week. Will post some pictures when i get a chance, but it was a walk in the park, really pretty easy.

www.picturetrail.com/skysoldier173rd

tapeworm 08-26-2010 10:22 PM

Re: What did you do to your truck today?
 
I took my truck apart. Really apart. Yesterday, the truck had a cab (minus the doors), front clip, engine & transmission. Now, its just a frame with the front suspension & rear suspension.

I cut the BBW roof off the cab, and put off to the side. The windshield went into the garbage, everything else in a dumpster full of scrap metal.

Now I guess I have to start putting it back together

losthope 08-29-2010 07:18 PM

Re: What did you do to your truck today?
 
i finished sanding and primering gmc hood and got it on, i also had some chrome bullets in garage and put them in grill to see waht it looked like think it needs more then the four i had,put chrome headlight bezels on, put my chrome tailgate chains on,and i put some chrome bullet knobs on my dash since i was missing some of the stock ones!
http://i976.photobucket.com/albums/a...ennz/012-1.jpg
http://i976.photobucket.com/albums/a...tjennz/011.jpg
http://i976.photobucket.com/albums/a...ennz/014-1.jpg

nachodog2 08-29-2010 11:00 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
changed mine up a bit.

glendale 08-30-2010 12:38 AM

Re: What did you do to your truck today?
 
i got about half way through cleaning my 72 five lug rear end and had the tires dismounted so i can sand blast them and flake em this week.

73737373 08-30-2010 09:27 AM

Re: What did you do to your truck today?
 
On my 65, located and fixed break in wire for my pass side tailight. Installed adapter so I can use a screw on oil filter. Removed, repainted and reinstalled valve covers and put on new gaskets. Replaced belts and hoses. Installed new H2O pump. Changed anti- freeze. Replaced a couple of dash board lights. Lubed front end. Installed the original air cleaner housing. Found where my headlight pigtail had come loose from the main wiring harness...now I have headlights. Removed floor rubber....yuck...and now have my projects lined up for next week.

bubba327 08-30-2010 03:30 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Watched my 16 year old daughter and her 46 year truck head off to the first day of school. She has been waiting for this day for over a year and a half now.
Attachment 627219 It does not seem that long ago we towed the 64 home after she and my wife found it on craigslist. Things are not done yet but enough to let her drive it for a while. See "Bubbas Recycling Project" http://67-72chevytrucks.com/vboard/s...d.php?t=365170 for full story.

lakeroadster 08-30-2010 04:40 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Installed some "Speedway" rubber hood latches to hold the tailgate shut. The thought here is the elastic nature of the latch should help to minize tailgate rattling. Also added urethane tailgate trunnions.

losthope 08-31-2010 08:00 PM

Re: What did you do to your truck today?
 
after work i installed my chrome window rain vents,chrome rearveiw mirror, and chrome chevrolet glove box emblem that i got from lmc very dissapointed with glove box emblem looks good but pull it out of the sealed plastic wraper and its made of plastic !!!!!!!!!wtf and it cost 39.00 give me a break !! i installed it anyways....oh well heres the pics.
http://i976.photobucket.com/albums/a...ennz/004-1.jpg
http://i976.photobucket.com/albums/a...tjennz/006.jpg
http://i976.photobucket.com/albums/a...ennz/005-1.jpg

glendale 08-31-2010 09:42 PM

Re: What did you do to your truck today?
 
got my rear end ready to go in minus the brake line. and decided to run the wheels in satin. i will have them mounted and balanced tomorrow.

http://i70.photobucket.com/albums/i9...952/myrear.jpg

http://i70.photobucket.com/albums/i9...52/mywheel.jpg

losthope 08-31-2010 09:48 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by glendale (Post 4167434)
got my rear end ready to go in minus the brake line. and decided to run the wheels in satin. i will have them mounted and balanced tomorrow.

http://i70.photobucket.com/albums/i9...952/myrear.jpg

http://i70.photobucket.com/albums/i9...52/mywheel.jpg

straight orange or a lil metal flake??

glendale 08-31-2010 09:50 PM

Re: What did you do to your truck today?
 
just straight orange. i kinda dig it satin.lace panels this weekend you down?btw is your truck from florida?

losthope 08-31-2010 10:04 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by glendale (Post 4167452)
just straight orange. i kinda dig it satin.lace panels this weekend you down?btw is your truck from florida?

well i just checked the plate numbers on the fourm and no its from freemont i know it has orange peel in the paint but we do grow oranges in cali !!and we lacing our trucks this weekend im down!!:lol:

willyp 09-09-2010 07:51 PM

Re: What did you do to your truck today?
 
glendale, any updated pics of your rig?......im diggin your truck.

markeb01 09-09-2010 09:00 PM

Re: What did you do to your truck today?
 
I haven’t been able to drive my truck for most of a month because of a hand injury, the shifter requiring more pressure than I can exert. So, I asked my son to machine up a new handle out of round stock 2.5” longer than the previous version. My wife installed it for me this morning. This reduced the shifting pressure by about 40%, so I should be back behind wheel shortly. I was a little concerned it would look goofy being this long, but after studying it for a while, it seems to look more natural than the shorter stick.

http://img3.imageshack.us/img3/5673/handled.jpg

CVA59 09-09-2010 09:03 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by markeb01 (Post 4182030)
I haven’t been able to drive my truck for most of a month because of a hand injury, the shifter requiring more pressure than I can exert. So, I asked my son to machine up a new handle out of round stock 2.5” longer than the previous version. My wife installed it for me this morning. This reduced the shifting pressure by about 40%, so I should be back behind wheel shortly. I was a little concerned it would look goofy being this long, but after studying it for a while, it seems to look more natural than the shorter stick.

http://img3.imageshack.us/img3/5673/handled.jpg

Looks real good! :metal:

1Bad62Pro/Street 09-09-2010 09:11 PM

Re: What did you do to your truck today?
 
Just messing around after work..
Gotta fire the Ole' '62 up and let her breathe a little fresh air....
She'll be on the road soon!

markeb01 09-09-2010 09:23 PM

Re: What did you do to your truck today?
 
Sounds sweet! Looking forward to seeing it back together.

lukey 09-09-2010 10:32 PM

Re: What did you do to your truck today?
 
well, i had a flat. my garage is uphill, and my airhose wouldnt reach...so i aired my tire up with a foot pump made for a frikin bicycle! now its parked next to the garage where the airhose reaches!
Posted via Mobile Device

glendale 09-09-2010 10:58 PM

Re: What did you do to your truck today?
 
she runs and drives. any help with me wheel color.
http://i70.photobucket.com/albums/i9...52/copper1.jpghttp://i70.photobucket.com/albums/i9...2/truck1-2.jpg
http://i70.photobucket.com/albums/i9...heelcolor2.jpg

Rusteeze64GB 09-09-2010 11:05 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
finished up my brake job today. New brake lines on the front, adjusted and bled them, Swapped my leaky carb for a fresh rebuilt one. I also Put on a fuel filter, my tailgate and tried hooking up some brake lights. I think I have a short on them because they are not working properly. I also went to the DMV to see what it is going to cost me to transfer title and register my truck. After all of this today my truck wont start at all. :( Hey I got alot of work done though :)

narx66gmc 09-10-2010 12:30 AM

Re: What did you do to your truck today?
 
nothing to the truck, but getting the garage ready for it.....
http://i128.photobucket.com/albums/p...ttachment1.jpg

lakeroadster 09-10-2010 08:49 AM

Re: What did you do to your truck today?
 
2 Attachment(s)
I purchased (2) cab air vents off Ebay and (being a retired CAD monkey) designed a surround to instal them into the back of the cab. They go in the back of the cab behind the seats and have flaps on them to prevent air, water & debri from entering the cab, but allow air to flow out of the cab.

I like to think of it as "Astro Ventilation" for my old '65.

markeb01 09-10-2010 02:03 PM

Re: What did you do to your truck today?
 
My cab is so air tight it’s difficult to close the doors without slamming, unless a vent window is left open. In the garage, this is what I do, and then push the vent window shut after the doors are closed, which isn’t very practical when left in public. I studied off and on for several years looking for a one way vent but never came up with a workable concept. I thought about installing the elusive one way valve in the kick panels since I no longer use the fresh air vents, but never came up with anything suitable. That wouldn't work any longer anyway because of the upholstery.

Yet again you’ve pioneered another great solution, thanks for sharing. I’m looking forward to seeing the finished install. Also, are those vents off a production vehicle, and if so do you know what they came from? I’m curious if those could be installed on the floor under the seats, or if they need to be mounted vertically in a protected area like the back of the cab.

63rexC10 09-10-2010 03:31 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Rusteeze64GB (Post 4182307)
finished up my brake job today. New brake lines on the front, adjusted and bled them, Swapped my leaky carb for a fresh rebuilt one. I also Put on a fuel filter, my tailgate and tried hooking up some brake lights. I think I have a short on them because they are not working properly. I also went to the DMV to see what it is going to cost me to transfer title and register my truck. After all of this today my truck wont start at all. :( Hey I got alot of work done though :)

I can't tell from the pic, but I hope you're using jack stands. I've known a few people who didn't and ended up paying for it. Remember, safety first!:chevy:


All times are GMT -4. The time now is 11:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com