Originally Posted by bigdaddy64 (Post 4192293)

Hello everybody, just a couple of pics of my 66 C20. The first is me in my old 1 car garage where i did most of the work. have since moved and have a 2 car garage, room to spread out a little! The second pic is just after i got the cab back on the frame. I painted the frame using KBS Coatings Gloss black frame kit, great product. The rockers, cowl area and air box, and some of the floor boards had some rot that i've fixed, just have to fix a few holes along the drip rail and the cab will be ready for paint. To do the frame and the underside of the cab, i had it jacked up with camper jacks and suspended from the rafters. Was able to do the rockers real easy because they were belly high, so i could sit on my stool and repair them! The third shows the Watts linkage i made to replace the panhard bar. The forth shows the motor that will be going in, a 455 pontiac bored to 463 with Eagle crank and rods, billet 4-bolt mains, Kauffman D-port aluminium heads and i'll be running a Megasquirt injection.

Originally Posted by scotts62 (Post 4192508)

Very cool! Have a build thread started?
Posted via Mobile Device

Originally Posted by jonzcustomshop (Post 4192977)

my 63's together for a photo op.

Originally Posted by 66redw/white (Post 4194662)

how do you post pictures? id like to throw up acouple of mine but i suck

Originally Posted by 66redw/white (Post 4194662)

how do you post pictures? id like to throw up acouple of mine but i suck

Originally Posted by jonzcustomshop (Post 4193021)

saw this on the hamb, arizona hot rods sept 5th or so...total loss
63 chev truck gone, +many other cool cars...

Originally Posted by aerotruk63 (Post 4193497)

Yours and who's Jonz? Maybe she'll have something to say about that!

Originally Posted by 66redw/white (Post 4195907)

i keep getting the red x. like i said i suck. but heres the link anyway.

http://s796.photobucket.com/albums/y...9.jpg&newest=1

Originally Posted by 66redw/white (Post 4195946)

thanks for the tip. i hope this works.
http://i796.photobucket.com/albums/y...g?t=1284732048

Originally Posted by 66redw/white (Post 4195953)

awesome it works!
we cut 1 and a half coils up front and actually just took the rear springs out. so its a rigid right now. no worrys though i plan on runnin 5 inch drop springs and blocks. but i figured id get her sittin low till next week

Originally Posted by Rob Fisher (Post 4196825)

Here are some shots of my 1964 GMC 1/2 ton Long Box.
I have ordered a pile of parts from Nathan at Porter Built.
As soon as they arrive the transformation will begin.

Originally Posted by Hickup pickup (Post 4196887)

With 5" springs and blocks you might want to order a set of bolt in frame notches or fab your own! you'll only have about 1/2" clearance.

Originally Posted by 62 Bowtie (Post 4197081)

couple pics

Originally Posted by Rob Fisher (Post 4196856)

This is not my truck but it is very nice.
Does anyone out there own or recognize this truck.
I would sure like to get some information about the wheels and tires.
Thanks