Re: My Dusty 71 GMCe Electruck
Woo hoo!!!
|
Re: My Dusty 71 GMCe Electruck
That’s really awesome, congratulations.
|
Re: My Dusty 71 GMCe Electruck
Congrats on getting your EV truck to move under its own power. That is wonderful!!
|
Re: My Dusty 71 GMCe Electruck
Very coooool in the HEAT
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
Lexus Powered Electric Truck We're Driving |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
I noticed something called TST, Truck Standard Time, that's when you walk past the microwave on your way into the garage and look at that clock and it reads 10:30 pm and you go oh I got about an hour to finish up in there and then it's off to bed, well what seems like an hour later you walk back past that same clock and it jumped to 1:30 am, that my friends is TST !!! can you confirm? |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Street driving- cool!
Looking forward to highway video |
Re: My Dusty 71 GMCe Electruck
Let’s get that FLUX CAPASPOTATO working and ditch the lap top for some tire spinning
Kidding aside CONGRATS …amazing |
Re: My Dusty 71 GMCe Electruck
Hell yea, good to see it moving under it's own power!!
|
Re: My Dusty 71 GMCe Electruck
Very cool. Nice job.
Yes, the time really zips by. I don't even estimate my time consumption prior to, I just note how long it actually took after the fact. |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
Quote:
so we automated the BMW Safety Box control code so that the VCU pre charges the Inverter and if the bus voltage reading is above 300 volts closes both the (negative and positive contactors) this eliminates the need for a laptop directly connected via the USB umbilical to the VCU I also got tired of test driving with the radiator cap laying atop the regular car battery so I shoved it into the radiator where it actually belongs I am still in the delirious phase, so sharing some more silly test drive videos, we are getting more brave and had her over 5,000 RPM, here I am with a buddy who is holding a laptop just so we can watch the digital gauges that I modified and apparently done did it wrong, I will explain in a follow up post Electric GMC Truck Speedometer Needs Work video link . |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
this is what the default digital gauges look like and what mine read, I suspect Amps are not working because I am not using the ISA shunt but the OEM one in the BMW Safety Box, so I will be looking at that code next, as it will obviously fix the Kws as well
also since I did not lock the input shaft, and set MG1 torque to 0, MG1 is not spinning the rear wheels, that's why I just crossed out it's RPM and Temp gauges |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and this is how I dumbed them down, and what Josh in the passenger seat was trying to show us on the laptop
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
it's supposed to work on an Android tablet sorta like this:
|
Re: My Dusty 71 GMCe Electruck
Very cool video! So the brakes are awesome (not)?
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
I don't wanna hear that
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and now a Top Tip from a semi amateur EV Converter: Here's what you do the next time you try to put your newly converted EV into reverse and it won't go, before dropping the transmission and rebuilding it from scratch:
Step 1. clear the lump in your throat Step 2. check them wheels for one of these things... |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
parked her outside today... cause you know, I can, lol
|
All times are GMT -4. The time now is 01:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com