The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today! (https://67-72chevytrucks.com/vboard/showthread.php?t=401176)

butternut1972 03-09-2011 12:46 AM

Re: What did you do to your truck today!
 
Sanded on the cab tonight. Juse few more days of days of sanding then off to the paint booth.

67Slider 03-09-2011 09:45 AM

Re: What did you do to your truck today!
 
Tinkered around. Put a coat of clear on my headlight, wiper knob and cigarette lighter. Replaced the driver side defrost duct and fired her up in the garage for a few minutes.

stich626 03-09-2011 09:57 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by 67Slider (Post 4540801)
Tinkered around. Put a coat of clear on my headlight, .

OK i'll bite.. ^^^^^^^^^^^^^ WHY

Deenice21 03-09-2011 12:12 PM

Re: What did you do to your truck today!
 
was bored so checked my gears and made a poor mans spool . 3.73 btw..

and also sprayed down my engine bay with degreaser

Sinister 03-09-2011 04:04 PM

Re: What did you do to your truck today!
 
Put in a new temp gauge and sender.

67Slider 03-09-2011 04:21 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by stich626 (Post 4540828)
OK i'll bite.. ^^^^^^^^^^^^^ WHY

No particular reason. I smoothed down some gouges and then cleared the knobs. It turned them shiny. Hopefully it will last. They were some extras I just picked up. I may take some pics today when I get home so you all can tell me what you think.

mmmBoost 03-09-2011 07:08 PM

Re: What did you do to your truck today!
 
installed my power steering box and cross link. Found out the tie rod ends I have are all wrong. So back to the parts store. Recieved My wiring harness from EzWiring.

C10_ustacould 03-09-2011 07:12 PM

Re: What did you do to your truck today!
 
I bought a cab! It is a '71 A/C cab and the first major piece of the puzzle for me. I am stoked!

Sicklajoie 03-09-2011 09:02 PM

Re: What did you do to your truck today!
 
Put some 1 inch spacers under the rear coils to put a little rake in her.

Otsa580 03-09-2011 09:12 PM

Re: What did you do to your truck today!
 
Spent way to much time next to the air compressor sand blasting a set of rally wheels.
Hopefully paint will get sprayed tomorrow so I can mount my new to me 31x10.5 BFG All Terrians.

67Slider 03-09-2011 09:26 PM

Re: What did you do to your truck today!
 
Alright here they are....
[IMG]http://67-72chevytrucks.com/gallery/...m/000_1470.jpg[/IMG]
[IMG]http://67-72chevytrucks.com/gallery/...m/000_1471.jpg[/IMG]

a few quick coats of Clear Rustoleum Engine Enamel. 500degree heat resistant, gas and oil resistant. So my greasy finger won't break the clear down.

Again, Why? ...... No idea

PatrickGMC70 03-09-2011 10:26 PM

Re: What did you do to your truck today!
 
I rebuilt my carb. I'll say this: I was terrified about taking this thing apart, but it really wasn't that bad. I just took a lot of pictures and took my time. Having done it once, I feel like I could probably put the thing together in 20 minutes now.

So, if anyone is on the fence about tearing into one of these, DO IT!

http://i717.photobucket.com/albums/w...o/100_9653.jpg

ItsRandy 03-10-2011 12:28 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by 67Slider (Post 4542060)
Alright here they are....
[IMG]http://67-72chevytrucks.com/gallery/...m/000_1470.jpg[/IMG]
[IMG]http://67-72chevytrucks.com/gallery/...m/000_1471.jpg[/IMG]

a few quick coats of Clear Rustoleum Engine Enamel. 500degree heat resistant, gas and oil resistant. So my greasy finger won't break the clear down.

Again, Why? ...... No idea


Nothing wrong with that! looks good.

70s chevy 03-10-2011 03:04 PM

Re: What did you do to your truck today!
 
worked on drivers fender cut some rust out and welded new metal in. then stated on body work yeppe ..and undercoated inside of cab..:b69:

Petie724x4 03-10-2011 03:13 PM

Re: What did you do to your truck today!
 
Cleaned snow off her for the second time this week. Sat in the seat, rubbed the dash, and told her spring would be here soon..... Waiting for ball diamonds and beer. (Welcome to Ontario in the winter)

Mxracer202 03-10-2011 05:27 PM

Re: What did you do to your truck today!
 
blowing off my girlfriend to go home and finish up putting together the 292 I6. Nothing major just replacing the plugs and gaskets, then going to measure for the new radiator hoses get the original motor ready to be taken out.

stich626 03-10-2011 09:57 PM

Re: What did you do to your truck today!
 
scored headers at a junk yard crawl..
30 clams

magwakeenercew2jh 03-10-2011 10:12 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by ItsRandy (Post 4542593)
Nothing wrong with that! looks good.

Re: The clear on the knobs. Looks GREAT! I'm gonna steal the idea.
Thanks.

doctrouble 03-11-2011 02:39 AM

Re: What did you do to your truck today!
 
Found out what the interior cab looks like lit up at night : D !
(Its the simple things) :)

project 67 sub 03-11-2011 02:46 AM

Re: What did you do to your truck today!
 
got it vaccumed out, will pull it out and wash it and clean the windows tomorrow

VDOG 03-11-2011 12:32 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by mmmBoost (Post 4532380)
Damn! That sucks man. What happened that it broke? What brand spindles did you have on it?

They were 73 stock spindles. Installed in 2007, and I know my truck doesn't have over 600 miles on it since the install. Only thing I can think of is I did not have enough bearing grease. Other than that, I dont have a clue.

Should be ready by the end of the day to make the CPP cruise tomorrow.

stich626 03-11-2011 01:11 PM

Re: What did you do to your truck today!
 
ordering parts

greasemonkey71 03-11-2011 02:50 PM

Re: What did you do to your truck today!
 
sat on this ship

looking at everyones progress on their trucks

wishing i was elbow deep in an engine bay right now

oh...i also found out that my deployment just got extended due to the earthquake

67Slider 03-11-2011 03:14 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by greasemonkey71 (Post 4545780)
sat on this ship

looking at everyones progress on their trucks

wishing i was elbow deep in an engine bay right now

oh...i also found out that my deployment just got extended due to the earthquake

What a bummer! Been there! I missed out on Perth and Tasmania because some cousin to Saddam Hussein was being stupid and we got extended in the gulf.

Be safe

greasemonkey71 03-11-2011 03:26 PM

Re: What did you do to your truck today!
 
could be worse i guess..

we were actually in port and they recalled the entire ship about 3 hours after lib call went down


...lots of angry drunks


im on watch right now so i never actually got off the ship and i saved myself a few hundred $$$ on beer and other crap so i bought some parts


All times are GMT -4. The time now is 06:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com