The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 76 of 150 « First 26667172737475 76 777879808186126 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

tttuba 03-29-2013 07:19 PM
Re: What Did You Do With Your Truck Today ?
 
5 Attachment(s)
took the bed off again last weekend before getting sick AGAIN. darn flu. And mocked up the bed floor just to see what it would look like and to make sure I got the right kit.

lowdownstar 03-29-2013 07:35 PM
Re: What Did You Do With Your Truck Today ?
 
Quote:
Originally Posted by mechanixman (Post 5978250)
For now just have a beater to go to school and work in. Eventually (within two years....hopefully) Drop a 327 tri-power in, 5 speed, 3.73 posi in the rear, and two tone it blue and white(or silver).
A lot of the truck you see are dropped at least a couple inches. I thought it was so cool that I could actually just crawl under the truck with out a jack or stands, that I want to keep her riding high. (Plus I like looking down on other cars. =D )



Ha ha really?
Who came up with that idea?
It was only on the passenger side too. At least I think. I went with a screw driver, because I thought it would just be bondo. When I wised up, I carefully use an angle grinder and made a couple clean passes on the drivers side. Everything looked clean on that side.
I like the plan , i can't wait to watch it come alive
Ray

Dan in Pasadena 03-29-2013 09:08 PM
Re: What Did You Do With Your Truck Today ?
 
Took "G&R's 57 GMC"'s suggestion; stopped at the local bicycle shop to ask for an inner tube out of their trash and did THIS with it:
http://i832.photobucket.com/albums/z...ps8dbdaf2f.jpg
Yeah, kind of meh.... But the ones the shops sell don't look much different. It is what it is I suppose.

I also finally got my Craigslist-find front bumper painted on the reverse side and mounted. Thereby finishing the recent front end work:
http://i832.photobucket.com/albums/z...ps6ecf3abf.jpg
Hell of an improvement to me.

arturo7 03-29-2013 09:22 PM
Re: What Did You Do With Your Truck Today ?
 
Aaaaarrrghh!!!

Finally able to devote a day to wrenchin' after a 2 month hiatus. Unfortunately, I ran into a couple brick walls working on my axles.

G&R's57GMC 03-29-2013 10:57 PM
Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Dan in Pasadena, Try finding a smaller diameter tube, one that is tighter to the chain.

Today I installed the Pertronix system and cleaned the spark plug holes and gaped the plugs. Starts instantly, idles better :)

sqrlnts 03-30-2013 12:45 AM
Re: What Did You Do With Your Truck Today ?
 
Brush painted my truck black in 2 hours. Too late for pics will try to post tomorow.

Dan in Pasadena 03-30-2013 05:50 PM
Re: What Did You Do With Your Truck Today ?
 
"...Vaseline & paper towels.." To do what? Sounds kinda nasty to me, lol.

As some kind of rust remover? Never heard of that idea before. The paper towels & Ospho worked great though.

Hsdropout- I've wondered about using fender welt. You know these trucks never came with it, right? I think it can look really good but I'd worry it would trap moisture/start rust again.
Posted via Mobile Device

Dan in Pasadena 03-30-2013 10:44 PM
Re: What Did You Do With Your Truck Today ?
 
The Slippery Slope"

I wanted off white/almond letters to go with the contrast color on the cab. No dice, only straight white, black or chrome. The added "flash" in back made the other chrome on the truck look like ass.
http://i832.photobucket.com/albums/z...ps6f5ef862.jpg
http://i832.photobucket.com/albums/z...ps69581947.jpg

So I bought new mirrors...
which made the arms look bad....
which made the door handles look bad....
which made me think of the scratch guards (haven't decided if I'm installing those or not yet:
http://i832.photobucket.com/albums/z...psa745969c.jpg
http://i832.photobucket.com/albums/z...psfc17564c.jpg
http://i832.photobucket.com/albums/z...ps601ba215.jpg

As you can see the door handle chrome was pitted and totally dead:
http://i832.photobucket.com/albums/z...psae3f0673.jpg

Daze57 03-30-2013 10:49 PM
Re: What Did You Do With Your Truck Today ?
 
''vaseline and paper towels''

sounds like sumthin they would do up here

youngrodder 03-30-2013 11:34 PM
Re: What Did You Do With Your Truck Today ?
 
5 Attachment(s)
I worked on my interior. I stretched some fabric and covered both boxes in resin. fiberglass will be next. I will end up wrapping these in leather.

Marc

Daze57 03-30-2013 11:50 PM
Re: What Did You Do With Your Truck Today ?
 
v nice !

Dan in Pasadena 03-31-2013 12:08 AM
Re: What Did You Do With Your Truck Today ?
 
Quote:
Originally Posted by youngrodder (Post 5981700)
...covered both boxes in resin. fiberglass will be next...
Marc,
Pardon my ignorance because I know nothing about fiberglas. The fabric is

fiberglas, right? You draped the fabric where you wanted it, THEN you brush on the resin to impregnate it?

If so, why did you say, "...fiberglas will be next.."? I'm missing something.

OrrieG 03-31-2013 12:11 AM
Re: What Did You Do With Your Truck Today ?
 
Pulled the inside cab corners to fiberglas in the speaker enclosures. Found out the guy that sold me the speakers ripped me off, not honest mistake but very well thought out fraud. A** was moving to Colorado, I hope a bear eats him. Did get the stock door mirror cleaned and tapped and transfered the pattern to the passenger side, tomorrow will tack in some nuts. Got some furniture to refinish and repurpose to raise cash, glad yard and estate sale season is back in swing. Also tilled, cut up some firewood and other stuff for the head cook and veggie grower.

OrrieG 03-31-2013 12:13 AM
Re: What Did You Do With Your Truck Today ?
 
Quote:
Originally Posted by Dan in Pasadena (Post 5981759)
Marc,
Pardon my ignorance because I know nothing about fiberglas. The fabric is

fiberglas, right? You draped the fabric where you wanted it, THEN you brush on the resin to impregnate it?

If so, why did you say, "...fiberglas will be next.."? I'm missing something.
Tee shirt fabric, I use it too, great for complex shapes. You stretch, hit it with light coat of resin to stiffen it, then when it dries start laying up the fiberglas mat, etc. Can also be used to make a reverse mold.

G&R's57GMC 03-31-2013 12:27 AM
Re: What Did You Do With Your Truck Today ?
 
A 'Snuggy' works great , and its stronger, just add resin then, Bondo no need to add fiberglass.

OrrieG 03-31-2013 12:46 AM
Re: What Did You Do With Your Truck Today ?
 
Quote:
Originally Posted by G&R's57GMC (Post 5981788)
A 'Snuggy' works great , and its stronger, just add resin then, Bondo no need to add fiberglass.
Yeah, but then your wife is PO'd because she is cold...

Coconut-kid 03-31-2013 01:17 AM
Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Just finished my new bed floor. It's called Tigerboo.
I'll post pics when it's in.
Posted via Mobile Device
Posted via Mobile Device

G&R's57GMC 03-31-2013 01:38 AM
Re: What Did You Do With Your Truck Today ?
 
Quote:
Originally Posted by OrrieG (Post 5981824)
Yeah, but then your wife is PO'd because she is cold...
One can always get another one in another color or the latest Snuggy with a backside. Then she'll be happy. :)

sqrlnts 03-31-2013 02:36 AM
Re: What Did You Do With Your Truck Today ?
 
From this

http://i301.photobucket.com/albums/n...psa28a8c2e.jpg

To this in 4 hours, brushed on enamel. Took almost as long to tape off the spears and the cab for the two tone as it did to paint the whole thing black. I will call it a 40 footer! I plan to let the paint cure then sand down through it.

http://i301.photobucket.com/albums/n...psd65a5319.jpg

http://i301.photobucket.com/albums/n...ps7de67a21.jpg

Dan in Pasadena 03-31-2013 03:04 AM
Re: What Did You Do With Your Truck Today ?
 
Looks great from here....but then it's 389 miles to Chandler, AZ!

sqrlnts 03-31-2013 03:05 AM
Re: What Did You Do With Your Truck Today ?
 
Quote:
Originally Posted by Dan in Pasadena (Post 5981947)
Looks great from here....but then it's 389 miles to Chandler, AZ!
:lol:

Dan in Pasadena 03-31-2013 03:40 AM
Re: What Did You Do With Your Truck Today ?
 
sqrl, How is your truck lowered? It isn't still a straight axle is it?

sqrlnts 03-31-2013 03:48 AM
Re: What Did You Do With Your Truck Today ?
 
yup 3" CPP drop straight axle with 3 leaf springs up front. flipped rear.

Daze57 03-31-2013 01:27 PM
Re: What Did You Do With Your Truck Today ?
 
''brushed on enamel.''

i think you did a great job ! 40 ft or 400 ft looks really nice

youngrodder 03-31-2013 02:00 PM
Re: What Did You Do With Your Truck Today ?
 
Quote:
Originally Posted by OrrieG (Post 5981771)
Tee shirt fabric, I use it too, great for complex shapes. You stretch, hit it with light coat of resin to stiffen it, then when it dries start laying up the fiberglas mat, etc. Can also be used to make a reverse mold.
Yes, what he said. Ultimately I will be covering it with leather, so I don't need to have the body work spot on..

Next is the fiberglass mat with more resin.

Happy Easter
Marc
Posted via Mobile Device
Posted via Mobile Device


All times are GMT -4. The time now is 03:34 AM.
Page 76 of 150 « First 26667172737475 76 777879808186126 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com