Re: What did you do to your truck today part III
 

It's mine lol
It's a bench from a mid 90's full size chevy truck it even has an arm rest that tucks away for the driverhttp://i1109.photobucket.com/albums/...16151336_1.jpg

Re: What did you do to your truck today part III
 

Thank you.

"Block paving" as it is known here in the UK is popular and reasonably priced.

The guys who lay it will do an area like this in under a day. They work like machines.

This was that section looking the other way toward the house and where the woodwork shed went.


http://i294.photobucket.com/albums/m...x/P1030173.jpg

Re: What did you do to your truck today part III
 

Block, primer , block, primer, repeat, sore shoulder, want finished.

Re: What did you do to your truck today part III
 

Installed the sway bar I cleaned and painted last weekend. Painless install, drilling holes in the frame was a bit nerve-wracking but easy enough in the end. My LCA's already have the holes so no modifications required there.

It handles remarkably better... less feeling like a boat, more actual turning.

Re: What did you do to your truck today part III
 

We got the doors back on. It's starting to look like a truck again.

Re: What did you do to your truck today part III
 

Got the horn button installed, do not quite yet if it will work, but there is always the 'fingwr'.

Re: What did you do to your truck today part III
 

Nice gauge set up

Re: What did you do to your truck today part III
 

Thanks, I followed the OEM light setup and added the OEM click and tack

Re: What did you do to your truck today part III
 

I put glove box lock and under dash ashtray knob and snuffer on

Re: What did you do to your truck today part III
 

Got the cab stripped down to nothing. Just glass to remove and its time to start blasting.

Then I'll be onto what LT1 Burb is doing.

Any tips on removing windshield and back glass?

Re: What did you do to your truck today part III
 

We got the firewall painted today.

Re: What did you do to your truck today part III
 

Lowered the front of my truck another inch and the back another 2 inches. 7/9 drop now. found some super short shocks at Mooneyes. Getting those this week.

Re: What did you do to your truck today part III
 

Just razor knife it out and be careful of the stainless trim, don't force it.

Re: What did you do to your truck today part III
 

Well...I was just going to start with the headlight rebuild and ended up here. Guess I'll do a frame off now. Ha!

Re: What did you do to your truck today part III
 

Thanks LT1 Burb.

Re: What did you do to your truck today part III
 

I feel your pain.

Re: What did you do to your truck today part III
 

i used a durablock 48" call it black mamba. well that and about 3 others sizes!!!

Re: What did you do to your truck today part III
 

Was there 4+ years ago, still there. I've just recently started back at it. We were just going to replace rocker panels and got into a full frame off.
But we are gaining. Stay with it, a little each day and soon it'll be done.
Best of luck!

Re: What did you do to your truck today part III
 

http://i188.photobucket.com/albums/z...psibbanna3.jpg

getting ready to pull the engine. think all is left is unbolt motor mounts and remove driveline.

Re: What did you do to your truck today part III
 

Took 7" out of the original '65 12-bolt and installed a pair of Moser 7950 housing ends. These ends retain the stock brake mounting pattern while converting to the big Ford 3.15" axle bearings and retainer plates, thereby eliminating the need for C-clips.

http://i6.photobucket.com/albums/y20...h_P1230100.jpg

http://i6.photobucket.com/albums/y20...h_P1230124.jpg

The housing is now 50" end to end. It was 57" originally; already 1-1/2" narrower than the later truck 12-bolts.
http://i6.photobucket.com/albums/y20...h_P1230150.jpg

Re: What did you do to your truck today part III
 

Nice looking bed. What wood did you use? Did the diamond plate come in a kit or did you fab that yourself?

Re: What did you do to your truck today part III
 

Fired up my GMC after 2 weeks sitting and ran her for awhile. She was happy I paid some attention to her.

Re: What did you do to your truck today part III
 

-15C (5F) so I just plugged it in and came in for a coffee. Today it gets to drop a stove off at the recyclers. It will be interesting to learn how she handles the fresh snow without the aid of positrac.

Re: What did you do to your truck today part III
 

looks just like my replacement cab going on my 60 chevy.. Only thing is its a GMC cab and I will change out dashes..

Re: What did you do to your truck today part III
 

Its cold out here and my GMC didn't have a working heater, so I took the blower motor out to find it was seized up solid. Put one in that I got from my 66...well...now I have freezing ice cold air. lol But hardly a touch of heat. Took the top off and the core had pine needles and crap on top of it...vacuumed that off...sill no heat. Thinking my core is plugged up or something. Will be taking the core out Saturday to see if the fins are still plugged. If they are I'll blow them out and if that doesn't help I'm throwing a new core in. Probably not a bad idea considering this one is 50 years old anyhow.

EDIT: One of the vents was open letting cold air in. lol Closed that and problem solved. Time for some driving in the snow! Oh yeah...I did a burn out to while I drove it earlier today. haha