Re: What did you do to your truck today?
Amazing how you can wake up one day with an obvious solution to a what was a very complicated situation. Looks good Mark!
|
Re: What did you do to your truck today?
Lookin' good Mark, and you didn't even have to crawl under the truck! :metal: Those types of projects are great, come up with an idea, make the part and install it in a short time frame. Congrat's.
I spent the day starting to remove old paint and bondo from the bed rails and rear fenders of my truck. The top of the bed rails had over an 1/8" thick coat of bondo... removed that with a 4" electric grinder and a wire wheel. Using a paint stripping disc to remove the paint. Works pretty well, noisey and dirty though. Soooo, some people actually like body work? :lol: This is my first real try at it in the last 30 years.... I am assuming it will be more "fun" once I can start finishing, instead of striping. |
Re: What did you do to your truck today?
Have your box blasted, start fresh. Let someone else dirty their shop.
|
Re: What did you do to your truck today?
got my new roll pan in the mail today so I cut out the old bumper and started to fit it on my burb I'll weld it in and take some pic's.
|
Re: What did you do to your truck today?
well my flywheel busted and pulled my torq out its socket and busted my 700r4
i drop so many f bomb my back yard looks like japan lmao i took it to the shop so they can redo the clutches. i cant shft out of 1st maybe another 300 sent down the hole |
Re: What did you do to your truck today?
Replace my old vacuum advance and fuel line with stainless lines. Also got my new mig in today. Gotta go get some gas tomorrow and weld my cherry bomb in!!
|
Re: What did you do to your truck today?
3 Attachment(s)
Got my newly repaired hood on and test fitted and got the interior almost prepped for paint...lots of sanding and sanding....should spray it on monday if I can get the repaired doors hung and aligned
|
Re: What did you do to your truck today?
Friday 15th finished up back of cab with the bodywork, now on to the top of the cab, theres several hail dent mark some are hard to see cause I stripped the can down to bare metal so its all by feel. Im wondering if I can giude coat with a aresol primer? or should I just spray my epoxy primer and then look for low spots? Im hoping to get primer on the can before winter kicks in, any thoughts of what I should do if I cant get primer on it?:waah:
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
In my experience there's nothing better than epoxy primer for protecting bare metal. And it sticks so tight you can do body work over the epoxy. If the metal is going to be indoors protected from moisture, you can just spray it with Picklex 20. It will keep bare steel rust free indefinitely, but only if it remains dry.
http://autobodystore.com/picklex20.shtml Standard aerosol primer is generally lacquer, is not waterproof, and makes a poor substrate for anything put on top. It is commonly used as a guide coat, but the best results will be achieved if all of it is sanded off. Then there is no risk of incompatible materials under the finish. |
Re: What did you do to your truck today?
2 Attachment(s)
sand blasted the ash tray and painted it, made a trim piece to cover up the hack job around the radio face and mounted my speakers in the vent openings in the kick panels.
|
Re: What did you do to your truck today?
2 Attachment(s)
Started to paint the rear half of the frame today in preparation of the bed install. I did all I could with the big brush. A smaller brush next week should just about wrap up this phase. It should take at least a week for the Por-15 to wear off of my hands.
|
Re: What did you do to your truck today?
didnt get much done I got hit with the why isnt this done yet why do you statr something and never finish it yikes Pms, here in Indy you have do what you can do when the weather is good in October, I hope Sundays good, oh yeah Im off Monday and tuesday. has for my last question on Priming, my truck sits inside the garage during winter, and stays dry, should I still prime it ?
|
Re: What did you do to your truck today?
Set the 402 in and started mocking up the engine mounts.I am using the captured style 73-87 mounts.I also made sure the headers will clear.I will definitely be using an electric cooling fan.
|
Re: What did you do to your truck today?
We pushed sams60gmc down the road...
|
Re: What did you do to your truck today?
Mounts are mocked up!Will remove engine tomorrow and finish welding them up.
|
Re: What did you do to your truck today?
Got the old rockers off and geeeezzzz what a rusty mess that was.
|
Re: What did you do to your truck today?
3 Attachment(s)
Cut the top off today to clean up the rust, add some sound deadener, knock a couple dents out and weld top back on minus drip rail. This is the last of my rust repair! :four:
|
Re: What did you do to your truck today?
Well I finally got back to playin with OLE BLUE this weekend. My new to me toy, '93 Blazer, has had my full attention for the last month. Anyway, I took the rearend cover off, cleaned everything up, checked my gears & put in new 85W140 gear oil. I also sanded, primed, painted & put my swaybar on the front. I bought it from one of our members a while back as my truck didn't come factory with that option. After cutting out one of the crossmember rivets it bolted right up. Man I Love my '69!
|
Re: What did you do to your truck today?
Daydreaming about my day at the shop tomorrow....Stuck here at work for my Friday. :waah:
|
Re: What did you do to your truck today?
1 Attachment(s)
Well like my good buddy Frenchblue72 said. We got a good idea and pushed my frame over to his house, about 3 blocks away with one pretty busy intersection in between, when it got there we put the cab on the frame had to do some minor trimming to clear where the frame goes down for the body drop. Then we pushed it back to its home. Lays rocker no problem. :metal::metal:
|
Re: What did you do to your truck today?
Disassembled my throttle linkage looking for a problem, and discovered a fractured nylon spacer. Replaced it with a steel version, which restored the normally smooth operation.
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Do it again!
|
Re: What did you do to your truck today?
4 Attachment(s)
heres some pics from my cell phone that he wife took as she helped push once in awhile...
|
All times are GMT -4. The time now is 09:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com