Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
3 Attachment(s)
Little update from yesterday. Before removing AC stuff Mark and I measured up for new belt.
1st pic is the new radiator set up with an old mount, for checking for what type of bends I would need for new hoses, did find upper at local auto place, should have bottom by tomorrow. Pic 2 and 3 are of the ac compressor and brackets painted in etching primer |
Re: My 50 roadster pickup build
3 Attachment(s)
First 2 pics are same parts painted flat black, not dry so they look odd.
finall pic is of the exhaust pipe from header to the new mufflers, Mark welded them up using is tig machine, came out super. They are now ready to install. Till next time...Jim |
Re: My 50 roadster pickup build
1 Attachment(s)
Not much to show today. Mark put the exhaust system together, and reinstalled the AC stuff after it was painted. Started fitting hoses to the radiator. Can't do anything without parts, hope some will arrive this week...Jim
|
Re: My 50 roadster pickup build
beeeeeautiful stuff jim and mark!
and your "not much to show" list is impressive, one guy who works on truck to another. :lol: |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Looking good! I think everyone is waiting on parts.
|
Re: My 50 roadster pickup build
2 Attachment(s)
Parts did come in Friday (11/26) Mark installed the refaced gauges and hooked up all the wiring. I really like this new look. Also carried the front clip back down to the shop, tried to put back on and found several items that were hitting. Had to pull back off and modify things. Will install next week.
Today I took off the old ac condenser and put on the new aluminum radiator, installed on my original radiator bracket and it was hitting. After checking I found out that the bracket on the new radiator, didn't match the same angle that was on my Walker radiator. This pulled the lower section in about 1/2" compared to the old set-up. Will have to make some changes tomorrow. Here's pics of the gauges and the radiator...Jim |
Re: My 50 roadster pickup build
Gauges look great Jim. I had a similar issue with my radiator. I cut the welds that attached the bracket and moved them to where I needed them then had a friend weld the aluminum brackets back in place.
With fitment, you don't know what you don't know. Your gaining. Marc |
Re: My 50 roadster pickup build
2 Attachment(s)
Well a few things got done today, but also still have fitment issues.
All finished with the radiator set-up. Mark and I installed the front clip, and found that we still can't clear the ac tensioner, it's hitting the inner fender. We had clearance it a little, but still hitting, so off it comes tomorrow and do some more work. Here's a better pic of the gauges, and also with the front end on (not a good pic)...Jim |
Re: My 50 roadster pickup build
That paint looks like smoothly flowing, molten glass. It's absolutely gorgeous.
Awesome work! |
Re: My 50 roadster pickup build
Do you know what the condenser is from or is it part of a kit?
|
Re: My 50 roadster pickup build
That dash is awesome!
|
Re: My 50 roadster pickup build
Quote:
Quote:
Quote:
Quote:
|
Re: My 50 roadster pickup build
3 Attachment(s)
Well not a good day today. Mark and I removed the front clip, did some more relief in the inner fender and tried to install the front clip again. Was still way to tight. So I said let's cut out the sheet metal and make a new piece that will clear the AC compressor clutch and the belt tensioner.
Man I hated to do that, but had to. pic 1 is looking at the metal cut away, and template made. Pic 2 is looking straight down, so you can see how much clearance was needed. Pic 3 is the ac stuff. Should have known everything was going to smooth to last:lol::lol:..Jim |
Re: My 50 roadster pickup build
Ya feels like you are going backwards sometimes.
|
Re: My 50 roadster pickup build
That's a bummer, but I'll bet you will be happier when it fits the next time with the cut out looking very custom!
|
Re: My 50 roadster pickup build
Quote:
Quote:
|
Re: My 50 roadster pickup build
once it is welded in and painted, it will look as good as the 'inserts' that were made for the upper control arm adjusters. (very nicely done)
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
2 Attachment(s)
Mark did a great job today, making the metal insert for the inner fender. Welding everything and meal finished...Jim
|
Re: My 50 roadster pickup build
3 Attachment(s)
After Mark did all the metal work, we installed the front clip again, to double check clearance. The next 3 pics aren't very good, but we have great clearance around the ac clutch and tensioner...Jim
|
Re: My 50 roadster pickup build
1 Attachment(s)
We removed the front clip, Mark mixed some filler and put it on the patch. Will sand tomorrow, prime. Then sand and paint, will post pics when done. We also worked on a few loose ends, etc....Jim
|
Re: My 50 roadster pickup build
sometimes ya gota do what ya gota do! this will be great in the end
|
All times are GMT -4. The time now is 04:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com