The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

Rude Dude 04-09-2013 07:07 AM

Re: What Did You Do With Your Truck Today ?
 
Wrong post this truck is to new for this sub forum.LOL!

Quote:

Originally Posted by oneoff (Post 5999101)
After a few setbacks, got the alternator bracket in and mounted. Put in the dash cluster and dash pad. The Ron Davis radiator was shipped today, so next week this baby should be ready to fire up. Oh' and after the third set of exhaust manifolds as well.....LOL
Attachment 1089278

Attachment 1089279


davecarney2 04-09-2013 09:18 PM

Re: What Did You Do With Your Truck Today ?
 
bought the engine for the 59 GMC. Got a 2003 SS Silverado engine and a 4l80E trans.

mknittle 04-09-2013 10:15 PM

Re: What Did You Do With Your Truck Today ?
 
I worked on the plates my motor mounts will bolt to.

Clarance J 04-09-2013 11:51 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Just did some cleaning

NEWFISHER 04-10-2013 12:23 AM

Re: What Did You Do With Your Truck Today ?
 
I had installed a Lokar floor mount pedal and cable system along with the Holley 390 and set the pull at the carb end on the taller hole (away from the throttle shaft). This meant only 1/2 throttle, but it was a new motor and even though I have been flogging it, driving it everyday and long road tripping with it, I wanted to break the motor in right without full throttle pulls. Well, tonight I readjusted the pedal, cable and set the pull closest to the shaft. Fired it up, adjusted the idle and headed out for a test drive. WOW, the buzzen half dozen has come to life. My fuel bill is going to hate me!
Posted via Mobile Device

mknittle 04-10-2013 11:15 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by NEWFISHER (Post 6002384)
I had installed a Lokar floor mount pedal and cable system along with the Holley 390 and set the pull at the carb end on the taller hole (away from the throttle shaft). This meant only 1/2 throttle, but it was a new motor and even though I have been flogging it, driving it everyday and long road tripping with it, I wanted to break the motor in right without full throttle pulls. Well, tonight I readjusted the pedal, cable and set the pull closest to the shaft. Fired it up, adjusted the idle and headed out for a test drive. WOW, the buzzen half dozen has come to life. My fuel bill is going to hate me!
Posted via Mobile Device

That is what I like to hear!:lol:
My 250 is still in the corner of the shop naturally is the most awkward place to get to :lol: We don't have an engine hoist but a large "A" frame.

crossfire84 04-10-2013 05:10 PM

Re: What Did You Do With Your Truck Today ?
 
Nothing, been raining here 3 days now. Bad news basement flooded. Good news all my truck parts are high and dry.

youngrodder 04-10-2013 10:47 PM

Re: What Did You Do With Your Truck Today ?
 
5 Attachment(s)
I have been thrashing on finishing up my interior. This is my first real attempt at a full interior and I have surprised myself on how it is turning out. I also got my seats back from getting recovered. They were tan. I still have to paint out the plastic trim on the seats. I have a lot of pics but I will spare you all of the progress shots. The goal is to have a full blown interior that looks decent without spending a ton of cash.

Marc

Chevette 04-10-2013 11:16 PM

Re: What Did You Do With Your Truck Today ?
 
That looks real nice, youngrodder. And the seat is great. I like the low back too.

youngrodder 04-10-2013 11:43 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Chevette (Post 6004280)
That looks real nice, youngrodder. And the seat is great. I like the low back too.

Thanks, one change that I made was I removed the headrest and had the holes filled. Personally I dont like seeing the headrest showing through the back window.

Marc

Dan in Pasadena 04-11-2013 12:00 AM

Re: What Did You Do With Your Truck Today ?
 
Nothing ON my truck but did search Craigslist for trucks/vans/SUV's being parted out looking for black or dark grey retractable 3 pt. seat belts. I found a few but either they were too far away or were (apparently) made of unobtainium!

I've got a pair of dark grey out of an '07 Chevy Venture lined up to remove myself for $40 in dark grey tomorrow. We'll see if it pans out.

Dan in Pasadena 04-11-2013 12:02 AM

Re: What Did You Do With Your Truck Today ?
 
Youngrodder your seat looks great. Real leather?

What is it out of and is that the base it will be mounted to in your truck? Maybe I've missed it in your thread but did you build the bases yourself and will you have forward & back adjustability?

youngrodder 04-11-2013 09:20 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 6004358)
Youngrodder your seat looks great. Real leather?

What is it out of and is that the base it will be mounted to in your truck? Maybe I've missed it in your thread but did you build the bases yourself and will you have forward & back adjustability?

No, not real leather it is fake leather. It looks pretty close and was expensive. I considered using leather but with this being my first attempt at an interior I didn't want to learn on leather hides. My mistakes would be more costly unsing leather.

The seats are out of a mid 90's Nissan Ultima. I built the mounts and yes they retain all of the adjustment. You and see in the photo the handle to adjust the seat forward and back is just below the seat bottom. I also body worked the tan covers to remove holes for seats belts and other crap. Once painted black they should blend in nicely.



Marc

Dan in Pasadena 04-11-2013 09:52 AM

Re: What Did You Do With Your Truck Today ?
 
Well they look great. I think they look like real leather. I saw your photo on my phone which is why I didn't notice the repaired holes in the base covers. Wonderful job on EVERYthing you do on your truck!
Posted via Mobile Device

dubie 04-11-2013 10:07 AM

Re: What Did You Do With Your Truck Today ?
 
I had to take a couple nights off of mine. After thrashing away on it for almost an entire week, I was burning out. We're going to get it all wired up this weekend and install the fuel tank and run the fuel line

youngrodder 04-11-2013 10:42 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 6004792)
Well they look great. I think they look like real leather. I saw your photo on my phone which is why I didn't notice the repaired holes in the base covers. Wonderful job on EVERYthing you do on your truck!
Posted via Mobile Device

Thanks Dan I appreciate it.

Marc

lowdownstar 04-11-2013 01:12 PM

Re: What Did You Do With Your Truck Today ?
 
Looks great to me i wish my truck looked that nice inside!





Ray

OrrieG 04-11-2013 01:33 PM

Re: What Did You Do With Your Truck Today ?
 
Ordering parts....whoopeee....

Hot Rod Todd 04-11-2013 07:02 PM

Re: What Did You Do With Your Truck Today ?
 
Just back from a one month vacation in the truck. Travelled a couple of thousand miles, took in two drag meetings and two hot rod events, so four great weekends in a row.


So today I did the list of improvements that the truck needs this winter:

replace Mitsubishi van rear seat with rear from BMW so I can keep the bench, but hopefully with some comfort
speaker location for stereo as behind the seats isnt working
reduce in cab noise
replace trans cross member to eliminate vibration
wire up for trailer (have towbar fited already)
Fit alarm and keyless entry

And that lot should keep me busy for our winter which starts very shortly.

Dan in Pasadena 04-11-2013 10:56 PM

Re: What Did You Do With Your Truck Today ?
 
Hadn't physically done anything on my truck in a couple days so I did this quick upgrade:

http://i832.photobucket.com/albums/z...ps22d51273.jpg

I bought this overflow tank from eBay a year ago. I still have to find a short length of some small diameter; maybe 1/4" plastic tubing.

hsdropout 04-15-2013 10:56 AM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Installed remanufactured torque converter (stock) and bolted trans up to engine.

dubie 04-15-2013 11:06 AM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
We did sound deadener in the cab and started on the wiring process over the weekend. The light switch, ignition switch, fan and radio are all hooked up. All that's left in the cab to hook up is the fuel sender and gauges. Then we'll turn our attention to the engine bay and get the engine and lights wired up

Clarance J 04-15-2013 01:38 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Painted the housing. Install tomorrow.

meter swinger 04-15-2013 01:46 PM

Re: What Did You Do With Your Truck Today ?
 
Picked up a 77 12 bolt rear and dana 44 front. Got the rear in, going to start on the front next weekend. If I dont like 4x4 set up ill pull it all off and put in the jag ifs that i have. LOL
Posted via Mobile Device

mechanixman 04-15-2013 02:37 PM

Re: What Did You Do With Your Truck Today ?
 
I GOT MY TRUCK TO FIRE!!
It was more like a couple farts while using starting fluid. But at least i know that there is spark, and it can run.

On to the fuel lines.


All times are GMT -4. The time now is 11:38 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com