Re: 85 GMC Sierra Classic 1 Ton Crew Cab
It looks great Matt! Did you spray the back of the cab too, any orange peel?
The SPID in my step brothers 86 gmc said it was "Frost White", just a little info. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Yes I sprayed the back of the cab, everything got sprayed but the firewall and the bottom side of the cab. There is orange peel, but I think I am going to leave it. It really is kinda hard to see it. There are also some places that dirt got into the paint, but they are kind of hard to see as well. In all I am happy with how the cab came out, but its definitely not show truck quality, but i intend to drive this truck everyday. As for the white, they had several paint markers for fixing scratches and the guy showed me all of the GM whites and Olympic White seemed to be the best looking white out of all of them. it is a very bright white. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Well I have been putting the wiring back into the cab and decided to finish painting the front clip. I went ahead and put one fender on just to see what it looks like.
http://i167.photobucket.com/albums/u...b/IMG_0434.jpg Need to pull the hydro boost off of the other cab and then start hooking things up and I should be able to fire it up before to long. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Awesome dude!
Oh and............................................. you suck! J/K :lol: |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Looks great man.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Whoa! How did i miss this until now!? Looks great! Good job!
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Quote:
Quote:
I have to figure out what to do with my hydro-boost, it is leaking and I am not sure where to get a rebuild kit, and a remanufactured is $175. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
You might check rockauto.com
Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Well I went ahead and replaced the hydro-boost unit, and rebuilt the steering box, and got the steering all hooked up. I got the brakes bled, steering installed, and the clutch working. Now all I need to do is finalize the radiator mount, tighten a lot of suspension bolts, add some oil, anti-freeze/water, and buy some batteries and then I should be able to fire it up. I am still fighting the SRW or DRW option, but for now I am just going to throw my dually bed on and run it that way. I wont have all the paint done yet, but I should be getting it close to road worthy soon.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Definitely go dually. Love the white, too!
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Very nice job man! It is looking great!
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Quote:
Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Oh, shoot, I did and I forgot to reply to you. I will later man.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Well put the front clip on the truck yesterday and found out that somehow when I put the correct 86 front core support/spring mounts that they are mounted to far back so I am going to have to fix that.
I did however hook up a battery and was able to fire it up with the one battery. I need to get another one but I just wanted to make sure everything was working. I need to add some anti-freeze in the cooling system and then I will fire it up again and try and drive it around. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Well I have been working a lot on the truck. I have been trying to get the truck on the road because I think I am going to be changing the direction of this build once again.
http://i167.photobucket.com/albums/u...b/IMG_0447.jpg I have not gotten around to painting the doors or the bed and tailgate. I should be getting the truck tagged this week, and hopefully get my windshield and back window installed and then I am going to throw the bed on it and some other things. Now you might be asking, how am I going to be changing the direction of the build. Well After driving this around the farm for a while testing things I have noticed that the turning radius is very large. I am wanting to be able to drive this truck daily, so I am going to be converting my 3/4 ton crew cab frame into a short bed single wheel frame and swap the cab and front clip over to that frame. I want to be able to drive this truck all the time and with it being so long and so wide I don't see that being very good for DD duty. Once I get the short bed built I will probably find another cab to go ahead and build me a crew cab long bed dually on this frame. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
It looks good man!
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Thanks Bub! It almost makes me want to keep it a dually. Ill just have to see how it is when i get the bed on it.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
http://i167.photobucket.com/albums/u...ab/Crewcab.jpg
Got the bed on it. I started to get clutch problems. It seems as if my master cylinder for the clutch doesn't work right. So I bought a new master and slave cylinder so I hope I can get the bled some time soon and it works right. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Nice! Are you going to try to put the windows in yourself? Its not too hard, it just takes some time and patience.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
My windshield is broke so I am going to get a new one. I am going to go ahead and install the old windows back in, but my trim rings all broke in pieces and so I would need new ones (Not sure where to get them). Then when I get a new windshield Ill just have them install it.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Great work Matt! It's coming together. It's good to be able to move it around for sure. These things get hard to push around all the time. :lol:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Yes they do suck to push around all the time. As you can see there is a 30 ft pontoon boat behind my truck. This summer when my uncle wanted his boat I would have to push the truck out of the way. What you dont see is the hill that leads down to the shop that you have to push the truck up haha.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
You have a tractor...
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
I actually used my k10 to pull it, the part that sucked was when the brakes and steering was not hooked up and you had to turn the tires by hand, and pushing it back into the shop without brakes sucked because you had to keep it from rolling down the hill into the shop to fast.
Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
|
All times are GMT -4. The time now is 02:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com