The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Historical/This I know/60-66 Model Changes (https://67-72chevytrucks.com/vboard/showthread.php?t=351107)

slorio 07-31-2009 08:40 AM

Re: New Rear Brakes
 
Vernski:
The 1000 series GMC trucks all used a 10 bolt Dana 44 rear end with leaf springs. If you need drums in 50 years, you might check the part numbers listed in the attached. I had the same trouble when I started on my 1966 1000 series GMC fenderside.
Regards,
Steve New Orleans

http://67-72chevytrucks.com/vboard/s....php?p=3399195

ChiefRocka 07-31-2009 08:44 AM

Re: New Rear Brakes
 
Good info...it's going up !!

Vernski 07-31-2009 11:25 PM

Re: Historical/This I know/60-66 Model Changes
 
Thanks Solrio for the part#'s , I forgot to ask in my post will this difference in the rear ends affect when I change gear ratio's as mine is low geared? Thanks guys. Vernski:fb:

Hilandr451 08-01-2009 11:44 AM

Re: Historical/This I know/60-66 Model Changes
 
Someting I always wanted to know:

Why does the new model year start in September of the previous year?

answer:

In the early days of automobiling in America, open cars and poor travel conditions precluded winter motoring. Manufacturers displayed samples at the winter auto shows and took orders for spring and summer delivery.

slorio 08-04-2009 08:58 AM

Re: Historical/This I know/60-66 Model Changes
 
Vernski:
In changing your rear end ratio, you have to order parts for a Dana 44. They were very popular rear ends, but they are different than the Chevies used. The Dana 44 is a 10 bolt rear vs. the Chevies that were 12.

Regards,
Steve
New Orleans

markeb01 08-04-2009 08:13 PM

Re: Historical/This I know/60-66 Model Changes
 
Hi Vernski, if/when you decide to change ratios bear in mind there is a carrier break between 3.73 and 3.92. Anything 3.92 and lower (4.09, 4.27, 4.56) will require the same carrier. If you want a more highway friendly gear 2.70-3.73 you'll need the other carrier. They both fit in the same case, so you can switch up and down and still keep the same axle housing.

These are very popular and available from many applications including Jeeps, some later model 4 wheel drive Chevys, and a lot of Ford trucks. When I switched from my original 3.92 to a 3.08, they used the gear set and carrier from the front end of a Chevy Blazer. I subsequently went back to 4.09 gears and had to change the carrier again. There are a lot of aftermarket gear sets available but the OEM gears are generally the quietest and easiest to set up.

Also, fyi - at least for 1960 the GMC 1/2 short step model came with the Dana 44 and coil springs. This might prove helpful for someone wanting a Dana 44 in a same year Chevy truck.

jbgroby 08-04-2009 08:34 PM

Re: Historical/This I know/60-66 Model Changes
 
I had the same issue I had a factory rearend that came out as a 3.92 and I switched it over to a 3.23 MADE a world of differance. The only thing I need to do now is get a new speedo gear from Jim Carters.

See Pictures

http://rides.webshots.com/album/570438270cjSEvE

Jake

1964C10 08-09-2009 12:17 PM

Re: Historical/This I know/60-66 Model Changes
 
Thanks for all the work on this post Aerotruk! I enjoy reading this thread.

aerotruk63 08-09-2009 06:42 PM

Re: Historical/This I know/60-66 Model Changes
 
5 Attachment(s)
1960 Identification

aerotruk63 08-09-2009 06:43 PM

Re: Historical/This I know/60-66 Model Changes
 
1 Attachment(s)
1960 Last page

aerotruk63 08-30-2009 10:06 AM

Re: Historical/This I know/60-66 Model Changes
 
Power Brake unit
http://cardone.com/English/club/memb...ARTNUM=50-3537

1Bad62Pro/Street 10-01-2009 09:51 AM

Re: Historical/This I know/60-66 Model Changes
 
How-to-Restore Your Chevrolet Pickup

http://books.google.com/books?id=Slw...0Truck&f=false

http://books.google.com/books?id=aBu...age&q=&f=false

http://books.google.com/books?id=WLc...0Truck&f=false

Strodder 10-01-2009 11:03 AM

Re: Historical/This I know/60-66 Model Changes
 
Thanks, Great information. :metal:

Franks Fab Shop 10-08-2009 01:36 AM

Re: Historical/This I know/60-66 Model Changes
 
Question? ~ what was the last year of rear wood floors in suburbans....anybody?

Hilandr451 10-15-2009 01:54 PM

Re: 60-66 Model year changes
 
1Bad62Pro/Street,
Sorry for the red exes in your post about the badges. I had to do some site cleaning. Here's the revised version with a few new ones added:

1960
http://www.64moneypit.pages.qpg.com/.../60_emblem.jpg
1961
http://www.64moneypit.pages.qpg.com/.../61_emblem.jpg
1962 C10
http://www.64moneypit.pages.qpg.com/.../62_emblem.jpg
1963 C10
http://www.64moneypit.pages.qpg.com/.../63_emblem.jpg
1964 C10
http://www.64moneypit.pages.qpg.com/...g.w180h149.jpg

1965 C10
http://www.64moneypit.pages.qpg.com/...pg.w180h58.jpg
1965 Custom Camper
http://www.64moneypit.pages.qpg.com/...PG.w180h59.jpg

1966 C10
http://www.64moneypit.pages.qpg.com/...pg.w180h96.jpg
1966 Custom Camper
http://www.64moneypit.pages.qpg.com/...PG.w180h95.jpg

1Bad62Pro/Street 10-15-2009 02:59 PM

Re: Historical/This I know/60-66 Model Changes
 
Looks good!
Thanks Bud!

NF65Fleetside 12-17-2009 09:23 PM

Re: Historical/This I know/60-66 Model Changes
 
OK, so tell me this! What determined the sideview mirrors for the models? Were those options? Some have the standard stem and square/circle, some were the work/farm verticle rectangle, and I see others with full on towing mirrors.
Is the vast variety purely from people getting creative on their own or did GM actually put out all these mirror options?

1Bad62Pro/Street 01-20-2010 07:17 PM

Re: Historical/This I know/60-66 Model Changes
 
A Few Points of Interests 60--66 Chevy Trucks:
http://www.oldchevytrucks.biz/55_66/750w/0010.jpg
http://www.oldchevytrucks.biz/55_66/750w/0012.jpg
http://www.oldchevytrucks.biz/55_66/750w/0011.jpg

Bertomarc 01-22-2010 10:38 AM

Re: Historical/This I know/60-66 Model Changes
 
2 Attachment(s)
Does somebody knows anything about rims. I got this 66 LWB and I did not see these rims before. Where are they coming from?????

Franks Fab Shop 01-22-2010 01:33 PM

Re: Historical/This I know/60-66 Model Changes
 
they look toyota 4x4 to me

1Bad62Pro/Street 01-22-2010 03:00 PM

Re: Historical/This I know/60-66 Model Changes
 
They look like they are off of a Ford Ranger. There was one parked beside me today at work. Looked identical to those less the center cap.
http://images.newcars.com/images/pic...141A0101-E.jpg
http://images.newcars.com/images/car...rior-Wheel.png

1Bad62Pro/Street 01-22-2010 03:15 PM

Re: Historical/This I know/60-66 Model Changes
 
Quote:

Originally Posted by NF65Fleetside (Post 3680242)
OK, so tell me this! What determined the sideview mirrors for the models? Were those options? Some have the standard stem and square/circle, some were the work/farm verticle rectangle, and I see others with full on towing mirrors.
Is the vast variety purely from people getting creative on their own or did GM actually put out all these mirror options?


I don't think they to many options in those years. What you probably see the most on these trucks maybe the West Coast Mirrors.
http://www.cpusaparts.nl/images/47500.jpg
http://www.truck-trailer-towing.com/...es/5099350.gif
Towing mirrors. People put all kinds of after marked mirrors or just get some off another brand of truck and or just later year Chevy/GMC truck.
I think they were just one or maybe two options.
There are some fellars on here that up to par on this.
I am still learning myself.

Bertomarc 01-31-2010 04:58 AM

Re: Historical/This I know/60-66 Model Changes
 
thx. Looks simular yea. Must decide if i'm going to put original rims for myn or I leave this ones on it. They are not bad looking, but I want to make them red with ww tires, don't know if that will look good on this rims. Going to sand one and powder coat him red to see if it's looking ok???

regards,

Berto

1Bad62Pro/Street 01-31-2010 08:59 AM

Re: Historical/This I know/60-66 Model Changes
 
I think your truck would look good with Smoothies.
Also go to the search above and search the forum for wheel picture threads so you can get an idea of what you like or not. There are a few that are on here.

bushytlb 02-17-2010 11:34 PM

Re: 60-66 Model year changes
 
jchav62; Can you tell me what the hoods on 60 and 61 are refered to as (the nick name for them). bushy


All times are GMT -4. The time now is 01:26 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com