Re: Project Family Hauler
Working on matching the body curve on the door with the curve on the suburban. They are close but not exact. I used the rear part of a drivers door to make the rear of the door but as I keep finding out suburbans are different. Now is the time to make it work. The top part of the door was in too far so I made the body match, the middle of the door was flatter so I cut the suburban skin so I could flatten it.
http://i763.photobucket.com/albums/x...n/DSCN3425.jpg The bottom of the door lines up with the rocker panel but was rusted out on the suburban all the way to the wheel well. I finally opened up the body cavity (yes I did a body cavity search), looking for rust. http://i763.photobucket.com/albums/x...n/DSCN3426.jpg http://i763.photobucket.com/albums/x...n/DSCN3428.jpg http://i763.photobucket.com/albums/x...n/DSCN3432.jpg Then the worst thing happened, my welder stopped welding. I know I was almost out of gas, so I checked my wire spool and it was empty. I looked at the time and the welding supply store had been closed for 15 minutes.:banghead: Done for the weekend!!! Wrong, if the rain quits I can cut out a patch panel from extra parts. I don't like taking electric tools out in rain storms (reason for new garage). |
Re: Project Family Hauler
Wow! I have less inner wheel well than you do! That doesn't look too bad!
Posted via Mobile Device |
Re: Project Family Hauler
Quote:
|
Re: Project Family Hauler
Well anyone from Washington or somewhere close will understand this. It quit raining and was only a drizzle so I ran my extension cord to my pile of parts and cut off a patch panel from an old bedside.
I cut and fit the panel. Suburbans have a spot where the floor is spot welded to the skin and I thought it was good. So I cut there and the splice will be supported by the floor. It goes up high because there was a dent at a bad spot. See the arrow. http://i763.photobucket.com/albums/x.../DSCN3425c.jpg http://i763.photobucket.com/albums/x...n/DSCN3433.jpg http://i763.photobucket.com/albums/x...n/DSCN3434.jpg Then I finished cleaning the back of the patch and the inner wheel well with POR 15 clean and prep. I will paint it tomorrow. Got nothing else to do. http://i763.photobucket.com/albums/x...n/DSCN3439.jpg http://i763.photobucket.com/albums/x...n/DSCN3440.jpg http://i763.photobucket.com/albums/x...n/DSCN3441.jpg Here is the saddest site this weekend. No more wire. http://i763.photobucket.com/albums/x...n/DSCN3442.jpg And almost no gas. http://i763.photobucket.com/albums/x...n/DSCN3443.jpg |
Re: Project Family Hauler
Lookin really good man! I hear ya on the consumables!
Posted via Mobile Device |
Re: Project Family Hauler
I know how it is. I was trying to get as much work done on my Suburban as possible when it started raining. I did get the mufflers on during the hale storm though. The cops weren't liking the open headers much and it drew a lot of attention.
If you're ever down in Orting, I work at Safeway. Stop by, you'll probably see my Suburban out in the parking lot. I work mornings. |
Re: Project Family Hauler
Quote:
It rained so much yesterday I had a moat around my garage. Glad I raised it a foot above high tide here in the valley. Posted via Mobile Device |
Re: Project Family Hauler
The only one I saw this last June was this one. I was probably working during the Kingsman show.
https://sphotos-b.xx.fbcdn.net/hphot..._3223887_n.jpg |
Re: Project Family Hauler
Very nice work! I was thinking on the front door body line not matching up when using it for a rear door. My solution was to maybe cut up a long bed bed side to try to use as an outer skin. IDK if it'll work or not? Maybe I'll get to my crew cab project this year. It's looking very unlikely though. I have to get the Longhorn drivable first. Haha By the way, I hope you and your family have a Very Merry Christmas!!!!!
|
Re: Project Family Hauler
1 Attachment(s)
Quote:
Posted via Mobile Device |
Re: Project Family Hauler
Quote:
Posted via Mobile Device |
Re: Project Family Hauler
After all my welding and grinding I found my new garage needed some airflow. The smoke and dust were landing on everything so I put a fan in the ceiling. It vents out the roof. Now when I recoup from Christmas I will get more gas and wire for my welder and will see how much the fan helps.
Posted via Mobile Device |
Re: Project Family Hauler
I'm back. Been working on the other truck so I had a break.
Replaced all my old braided fuel line, it was 14 years old and my garage smelled like gas all the time. Plumbed it for a return style system. Used teflon lined braided line this time with steel hardline in the frame. Much easier to work with. This should fix my vapor locking problem too. http://i763.photobucket.com/albums/x...psd165d06d.jpg http://i763.photobucket.com/albums/x...ps442771fd.jpg Took some boards out of my bed to access the fuel line. http://i763.photobucket.com/albums/x...psd620ae98.jpg Then put the bed wood back together. http://i763.photobucket.com/albums/x...psc1526d14.jpg Then I get back to the suburban. Painted inside before welding patch panel. http://i763.photobucket.com/albums/x...ps171b2f71.jpg Patch welded in and smoothed. Also replaced the door skin again. http://i763.photobucket.com/albums/x...ps932b0cd4.jpg Did a little massaging of the latch and the door closes with just a click now. http://i763.photobucket.com/albums/x...ps1961f6f2.jpg Happier with the door skin now. It fits the curve better, the top is even with the inside and there is no bulge in the middle. http://i763.photobucket.com/albums/x...ps80ea9854.jpg Started setting the door gaps. http://i763.photobucket.com/albums/x...ps509c1cbd.jpg Bottom door gap is 1/8" http://i763.photobucket.com/albums/x...ps08e2d510.jpg Rear door gap still needs some work. But getting closer. http://i763.photobucket.com/albums/x...ps62d4c0f6.jpg |
Re: Project Family Hauler
I'm back. Been working on the other truck so I had a break.
Replaced all my old braided fuel line, it was 14 years old and my garage smelled like gas all the time. Plumbed it for a return style system. Used teflon lined braided line this time with steel hardline in the frame. Much easier to work with. This should fix my vapor locking problem too. http://i763.photobucket.com/albums/x...psd165d06d.jpg http://i763.photobucket.com/albums/x...ps442771fd.jpg Took some boards out of my bed to access the fuel line. http://i763.photobucket.com/albums/x...psd620ae98.jpg Then put the bed wood back together. http://i763.photobucket.com/albums/x...psc1526d14.jpg Then I get back to the suburban. Painted inside before welding patch panel. http://i763.photobucket.com/albums/x...ps171b2f71.jpg Patch welded in and smoothed. Also replaced the door skin again. http://i763.photobucket.com/albums/x...ps932b0cd4.jpg Did a little massaging of the latch and the door closes with just a click now. http://i763.photobucket.com/albums/x...ps1961f6f2.jpg Happier with the door skin now. It fits the curve better, the top is even with the inside and there is no bulge in the middle. http://i763.photobucket.com/albums/x...ps80ea9854.jpg Started setting the door gaps. http://i763.photobucket.com/albums/x...ps509c1cbd.jpg Bottom door gap is 1/8" http://i763.photobucket.com/albums/x...ps08e2d510.jpg Rear door gap still needs some work. But getting closer. http://i763.photobucket.com/albums/x...ps62d4c0f6.jpg |
Re: Project Family Hauler
Wow... I was just wondering how your 4 door was coming! Looking good!
|
Re: Project Family Hauler
Quote:
Posted via Mobile Device |
Re: Project Family Hauler
Well I made progress this weekend. (well a few other weekends too). Got most of the rough bodywork taken care of and sprayed some primer surfacer on the doors to see how they look.
http://i763.photobucket.com/albums/x...psc35bcbdb.jpg http://i763.photobucket.com/albums/x...ps7ee5d658.jpg |
Re: Project Family Hauler
Sure looks straight to me!
Posted via Mobile Device |
Re: Project Family Hauler
Sweet! :metal:
|
Re: Project Family Hauler
Quote:
Posted via Mobile Device |
Re: Project Family Hauler
Thats looking great! keep up the pace and it will be a family hauler sooner than ya know it!
|
Re: Project Family Hauler
1 Attachment(s)
I did get it turned around in the garage. Pretty easy when it's on roller skates.
I am making a patch panel list for the rainy season. Posted via Mobile Device |
Re: Project Family Hauler
1 Attachment(s)
Now for the ADD of my life. Going to help my dad on some rust repair on his quirky project. 1961 Corvair Lakewood wagon.
Posted via Mobile Device |
Re: Project Family Hauler
Welcome back!
|
Re: Project Family Hauler
Awesome lakewood!
|
All times are GMT -4. The time now is 03:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com