![]() |
Re: 1965 C20 fleet side longbed DD low budget build.
Booyah!!! Rain last night and early morning. Huston we are a go. Clear blue sky's and 75 :) like that country song. Sunny and 75.
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
Re: 1965 C20 fleet side longbed DD low budget build.
Get er done Matt!
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
Re: 1965 C20 fleet side longbed DD low budget build.
4 Attachment(s)
She's back in and sitting Purdy. :) oh yeah! went in like a breeze. is all I can say. Put a high volume oil pump in it. The clearance was so darn close between the crank and pump I had to grind it a bit more for my own comfort. Also some pictures from the other day tho. Got a new clutch setup that I tossed in. Still more to come tho. Going to try and start the motor today.
|
Re: 1965 C20 fleet side longbed DD low budget build.
Be careful with High volume pumps...they're known for breaking camshafts on these. :chevy:
|
Re: 1965 C20 fleet side longbed DD low budget build.
Darn it tj. Why ya have to say that. Ha. Is that regards to a high horse power motor
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
Re: 1965 C20 fleet side longbed DD low budget build.
I guess. Thing is I ordered a factory and the high volume pump. The high volume one is the same as factory size and everything. The normal one that was "stock" was 3 inches taller and looked like it was for a completely different motor. So I figured high volume won't hurt anything. Plus it doesn't get to cold in my area so this summer it should run fine. And if need be just find an original pump from maybe napa or auto zone and tull the pan to Toss that in. Won't take more than an hour. If that.
|
Re: 1965 C20 fleet side longbed DD low budget build.
Look'n Good!!!
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
Re: 1965 C20 fleet side longbed DD low budget build.
That we will brother haha. Yeaa if I ever kick a rod on that cylinder that be a noisy day. I'm just going to run some thin oil for the break in period to play it safe and see what she runs up to. But if this just strips out my distributor gear on the cam then heck with it. I'll go buy a new bump stick. . Also. Wheat I Ment by the size of the pump. The "stock" oil pump was 3 inches taller and larger than the high volume. I think the box was miss labeled.
|
Re: 1965 C20 fleet side longbed DD low budget build.
4 Attachment(s)
61 k10. Picked up that tig welder this weekend. Got her all set up and dialed in. Figured pictures of the fruits of my labor are in order :) behold the power of the little red welder from norway filled with parts from spain! Weirdest little machine.. enjoy The pics.
|
Re: 1965 C20 fleet side longbed DD low budget build.
2 Attachment(s)
Also got a little more done on the truck but not much. Instal ed carb riser, carb, and air cleaner. Along with setting distributor in place. And the starters bolted in. Enjoy the crick in your neck from the second photo.
|
Re: 1965 C20 fleet side longbed DD low budget build.
Hay Matt--Maybe i should of used it lol! Looks like it works well--enjoy.
|
Re: 1965 C20 fleet side longbed DD low budget build.
Thank you.
|
Re: 1965 C20 fleet side longbed DD low budget build.
Looking sharp. Be nice to see that engine running.
|
Re: 1965 C20 fleet side longbed DD low budget build.
Oh she will purr soon. Taking the brakes today. I really really don't want to but figured all the more reason to have it done sooner. My goal is Friday now. There's a big car show at buns and burgers in town every year to kick off the summer car shows. Going to be 200 cars plus. :)
|
Re: 1965 C20 fleet side longbed DD low budget build.
4 Attachment(s)
Okay so after pulling the hair out of my head 10 times I'm about 80 percent done with the brakes. I need a few springs and two adjusters for the front brakes and them I'm done. Other than bleeding the system. Also tackled my king pin bearings and races. Found the problem I think :lol: pit everything back in and she's as tight as 10 lb test fishin line with a 30 lb fish on Her. Should not have any problems with wheel camber. Tonight I'm going to tackle the transfer case. Have to change out idler shaft and the gears on it. Along with re sealing it all. Hoping to close shop by midnight. Just to wake up at 6 and start it all again
|
Re: 1965 C20 fleet side longbed DD low budget build.
Also hoping to see that 6 banger purr. :metal: Have fun with the brakes. lol I can laugh cause I done mine! :mm:
|
Re: 1965 C20 fleet side longbed DD low budget build.
Looking good....
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
Re: 1965 C20 fleet side longbed DD low budget build.
Quote:
|
All times are GMT -4. The time now is 05:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com