Re: Parting this 66
 

I will upload the pics tonight, they are to big and I don't have anything to resize them on this computer. I did not get that good of pics of the casting numbers. On the E-brake parts I will dig through what I have and see if I have it all. I should have some of it.
Jimmy

Re: Parting this 66
 

Here are the pics of the door trim and the manifolds. Still looking for the E brake parts.
Jimmy

Re: Parting this 66
 

I guess I should have asked for the Ram Horns that Kick Back (2WD) and Not like your that are for (4WD) trucks. Sorry but thanks anyway.

Re: Parting this 66
 

Those are original to my 2 wd 66. Swept back I think would run right through the clutch linkage. I have had 2 trucks with these on them and both 2 wheel drive.
Jimmy

Re: Parting this 66
 

OK, I didn't know that the "swept backs" manifolds for a 66 would get in the way. I have a 68 C10 so I guess the Chassis and the way the Engine sits where it sits is different from 66 to the 68 trucks. Learn something every day, Thanks

Re: Parting this 66
 

I have not seen a set on a 66. Just going by the amount of room I had it would seem to be in the way. I'll look for some pics and may learn something new.
Jimmy

Re: Parting this 66
 

that door piece is perfect, actually looks better than some of the pieces i have..ill take it off your hands. you can private message me paypal and price when you get a chance..

Re: Parting this 66
 

I need door panels for both doors 64-66 can anyone help me out ?

Re: Parting this 66
 

Looking for steering draglink, pitman arm and mounting bracket, steering box and core support crossmember with rad mounts.

Re: Parting this 66
 

Mike G I have door panels if your still looking

Re: Parting this 66
 

Thanks Jamie for the door panel help as I don't have any. Creep I have a steering box with the pitman arm, no drag links and the cross member was sold.
Jimmy

Re: Parting this 66
 

Do you still have the tracking arm bracket? If so how much?
Posted via Mobile Device

Re: Parting this 66
 

I know this is old thread but i'm looking for a steering column mount and parking brake lever. thanks

Re: Parting this 66
 

Feel sure I have the column mount and parking brake lever if Jimmy doesnt

Re: Parting this 66
 

how much with shipping to TX 75604

Re: Parting this 66
 

I should have them both. Sorry for the delay was a busy weekend with the storm. I'll pull them out tonight when I get home.
Jimmy

Re: Parting this 66
 

Not a problem hope your not under water!

Re: Parting this 66
 

Got them both. Got to get the pic off my phone and resize it.
Jimmy

Re: Parting this 66
 

Here is the pic. Are these the two parts you need? If so $35 and what ever the shipping is.
Jimmy

Re: Parting this 66
 

Looks right. just let me know how to pay, shipping to TX,75604 Thanks

Re: Parting this 66
 

I'll get them packed and a shipping cost.
Jimmy

Re: Parting this 66
 

Jimmy I'm heading out to visit family in OH I'll check for how to pay when I can but if its a few days don't worry I want them thanks.

Re: Parting this 66
 

Jimmy,

Was not sure if you still have the two steering column that were in the bed of the truck apart? Read through did not see them sold. Condition/ description.

Thanks,
Les

Re: Parting this 66
 

Looking for a deluxe heater control and 1 working horn for a 66 c10

Re: Parting this 66
 

I might be a little late to this party, but do you have a 12 bolt rear end for sale by chance? One that is in good condition and 63" with 3.08 or close to that, gearing?