![]() |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Mounted the trans. The lazy way ;)
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
fabbed a bracket to hold the exhaust brackets
|
Re: What did you do to your truck today.The 3rd chapter
I am so out of everyone's league here. :uhmk:
First day of working on my "new" '68. Made a custom gas pedal, scrap metal and parts box bolts that matched the tap sizes. Need to maintain the Bucket Of Bolts theme. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I blew up my engine yesterday.
I guess it was just this engine's time. It's probably the factory 283. It has a rochester 2bbl on it and it smokes like a fiend, tons of blow- by too. I even topped off the oil the day beforehand, but I guess the rest of it was too thin. Regardless, about 12 minutes into my drive down Route 46, the gremlins came a'knockin. Couple hours waiting for the tow, and the truck is back in the driveway, sitting until I find a new heart for it. |
Re: What did you do to your truck today.The 3rd chapter
Sorry to hear that,those 283s are a great engine.What are your plans, rebuild it or go crate/ rebuilt?
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
My friend who works at a shop has a '98 350 with "lt1 heads" sitting around that was supposed to go in a client's car, but said client wrecked their project before this engine went in. It's looking like I'll go that route for now, as it's the easiest. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
Jess |
Re: What did you do to your truck today.The 3rd chapter
Quote:
I'm not too upset about the engine, it was coming eventually. Now I just have a fire under my ass to accelerate that portion of my plans ;) |
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Hugger Orange base clear applied to the K10 Cheyenne
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
little bit of this little bit of that
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Patch work on the cab supports. Bought slip on support covers but didn't like the way the fit or function. There was enough good metal there to fix them.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
i mounted and wired air ride gauge and seats from TMI finally arrived.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
New Linex Bed!
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
So I was taking the bolts out of my shifter and hit, broke, one of my micro switches for the p/l. To fix it I had to pull it apart, redo it and all the wiring I did before. My standards went up and it didn't pass code.
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Just worked on my new 68. Truck has been sitting a long time. It would start and then starve for gas after a couple of minutes. Let the pictures do the talking. Shame is the owner put a new tank in 2013 and it's full of rust.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
thanks jz |
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Cab support and cab corner repair and replacement.
|
Re: What did you do to your truck today.The 3rd chapter
No pics, but I finished modifying the bench seat sliders to fit my bucket seats yesterday. Just need to blast them and paint them. Still have a lot of work to do on the seats themselves though. Gotta repair the foam and get the skirts and bottoms cleaned and painted, then install the PUI covers.
|
Re: What did you do to your truck today.The 3rd chapter
Yesterday I went to go look at an LQ4 setup some guy had in his C15. Would have been a good deal/ good way to go, if the engine didn't knock...
Looks like I'm sticking to an older gen small block and saving the new stuff for down the road a ways, when I save enough to do it the right way, complete with a TKO. |
Re: What did you do to your truck today.The 3rd chapter
I went to the DMV and paid up my tags. :waah:
My mail has been screwed up since I moved twice, so I was late because I never got the bill. But the DMV was very understanding... Well no they weren't. That was a joke. They hosed me out of over $600 and could care less. My registration was apparently sent to my house in So. Cal. and my tenant was supposed to forward anything important to me. I guess he forgot about that, and I think his rent is about to go up. I did an address change online when I moved, but that didn't seem to work, because it still showed my old address on 3 of my cars when I was at the DMV. But at least they smile when they take your money. At least it's done now. Hopefully. My new expensive sticker. http://67-72chevytrucks.com/gallery/...edium/Tags.jpg |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Sunday - state inspection. $7.00
Today - title and registration. $121. Legal to drive on the public roads. Priceless. Cheesy, but made me smile... |
Re: What did you do to your truck today.The 3rd chapter
I looked at it , than sat down to ponder .
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Well between the snow squalls 27° temps and 60 mph winds I managed to get the tank out of the 68. Need to get it boiled out full of rust .Just wondering what the 440 behind the tank and under the hood mean. Also my truck must have been made on a Friday. Runs all over the interior . Even the dash I'll get picks of if tomorrow.
|
Re: What did you do to your truck today.The 3rd chapter
:lol: Or made on Monday, when they all came in hung over. I can attest to seeing the guys going across the street to the "Chevy-Ho" at lunch time at the Van Nuys AD, and coming staggering back drunk as rats. Of course, the only "trucks" we built were El Caminos, and the occasional GMC Sprint.
Before going to work there, I worked at a dealer, and we had an El Camino come in with runs about every foot or so, on both sides. The Zone Office guy made a point to inspect that one! :lol: He wouldn't believe it, until he saw it. How many people could have laid eyes on it and not said a thing? Crazy. It came from the Van Nuys plant, as I recall. |
Re: What did you do to your truck today.The 3rd chapter
Steevedee you hit . I knew a couple of guys that worked in the Terrytown NY plant. One worked at ny uncles body shop and every Friday he would be a little tipsy. He would get to the shop around 3pm .
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Installed the spindles and coil springs today. Two big sons and the weight of the engine made it easy, even with stock height coils.
Now that the suspension is in I'll say this about Moog. It would be nice if they included all the hardware, and the right hardware too. Luckily my old castle nuts were refinished. Among other things they gave me 5/8" nuts for 1/2" studs. That and zerk fittings aren't what they used to be. I used the old ones. |
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
I found out what a 50 year old speaker looks like🤣 and did some cab sanding.
|
Re: What did you do to your truck today.The 3rd chapter
Put the tank back in and got her running for more than a couple of minutes. Next it's a tune up and a steering box.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Driving lessons.
|
Re: What did you do to your truck today.The 3rd chapter
Worked on the seat brackets. Cut them down and inch and got the mounts so it sits back 2". And pulled it out of the garage and turned it around under its own power for the first time.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Took a sunny morning cruise
|
Re: What did you do to your truck today.The 3rd chapter
met up with a welder today to help Fab my exhaust this Kid is good... buddy of mine has a couple race cars recomended him Im stoked he will tig all ...i saw some of his work on stainless on the race cars unbelievable
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Paint work on the K10 Cheyenne is done. Assembly has begun...
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Two hours and I managed to get all of the OEM spark plug stands and wire routing clips installed as well as most of the new ground straps. Sooo much easier to do when you don’t have a radiator, exhaust manifolds and inner fenders in the way under the hood.
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
I wanted to get the cab back on the dolly so I can finish smoothing out the firewall... but the bed was on it. It took quite a bit of finagling and figuring but it’s done. :sumo:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Appers to be an engine hoist.
Good work on getting it switched around. |
All times are GMT -4. The time now is 03:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com