Re: NAPCO Thread
Quote:
|
Re: 69 Napco axle.
Quote:
|
Re: NAPCO Thread
I think the next up from the 110 is 13500, 15000 and then 17000. The trucks with 5 10 wheels and 6 hole Budd wheels must be HO 110 or 13500 axles and the locking hubs do not have the grease zerk in the center. the trucks like the two of mine that have 10 hole Budds have the zerk in the center and I think are HO 15 but that's not written in stone yet, still looking for more data.
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
That's a cool truck. I see you have another N-series. Don't see those too often...and I go to a few big antique truck shows a year. Same goes for the GM B-model.
|
Re: NAPCO Thread
When or did NAPCO go out of business ?
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
Not sure when they stopped, but I had a '71 C/30 NAPCO at one time. The need for one tons remained till late-70s and they went on with the medium-heavies years beyond.
|
Re: NAPCO Thread
Now that you mention it, where is the proper thread for C30 and K30 stuff, would feel better if it was under heavy stuff but you tell me?
|
Re: NAPCO Thread
1 Attachment(s)
This might help answer some questions.
|
Re: NAPCO Thread
1 Attachment(s)
Not many Napco advertisements out there.
|
Re: NAPCO Thread
That's a nice advertisement. I will save it.
|
Re: NAPCO Thread
5 Attachment(s)
Great bump for one of my favorite threads. 58 GMC only $4400
https://maine.craigslist.org/cto/d/1...622380824.html Very rare original Napco factory 4x4 truck. Spent most of it's life in an old Colorado mining town. Surface rust only. Very solid body and frame. All bolts turn if you need to work on something. Nice running 283 V8. Electronic ignition. 5 speed trans. Clutch good. Exhaust good. Brakes work but hydroboost should be rebuilt for more stopping power. 4wd works fine. Operational dump bed and power tailgate. Lights work. Military tires have some dry rot but holding air fine. Everyone that sees this makes some type of comment about how they would hate to see this behemoth bearing down on them in their rear view mirror. Very one of a kind striking truck. Dual wheel chains on the sides were for Rocky Mountain winter running. Sold with Maine bill of sale as well as have the Colorado title for it. Call 207-239-87 zero four. If ad is up, Truck is still available. Emails that look fake will not be replied to. |
Re: NAPCO Thread
Can anyone here help me locate tie rod ends for a 59 1/2 ton NAPCO Chevy? I'm in San Diego area. Thank you in advance
|
Re: NAPCO Thread
That is beyond cool!
|
Re: NAPCO Thread
Quote:
https://www.vintagepowerwagons.com You'll want the NAPCO shop manual pamphlet when adjustments are made to toe-in. If it's like my 57, each rod end has different thread count (course/fine). To get correct toe, you have to turn one rod end 1 turn and the opposite end 2 turns etc. The pamphlet has a chart that will tell you which one to adjust and how much based on your initial measurements. Jonathon |
Re: NAPCO Thread
|
Re: NAPCO Thread
JPBrecheisen, thanks I'll give them a shot
|
Re: NAPCO Thread
4 Attachment(s)
Thought I would share this 1958 GMC Napco I helped a buddy get yesterday. Its a V8 with a three on the tree w/overdrive??? We looked it over for about 2 hours. It has zero rust or repairs anywhere to the sheet metal on it. I'm a bit suspicious of the bed though. It has a fleetside emblem on it and I don't think that would have come on a GMC. Can anyone confirm that this emblem shouldn't be there? Neither one of us know much about these trucks but are learning.
|
Re: NAPCO Thread
If Fleetside is right then I am wrong. I never heard of or recall seeing even the first year called anything but Wideside. Pretty sure the GMC got no emblem. Very nice find
|
Re: NAPCO Thread
I believe that emblem belongs on a Chevy not a GMC.
|
Re: NAPCO Thread
4 Attachment(s)
RARE!!! 51 Napco $9500. Looks to be reasonably priced and complete.
https://portland.craigslist.org/mlt/...630252702.html 1951 Chevrolet 3800 4x4 pickup truck. Napco 4x4 conversion kit installed by dealership in 1953. 218 straight 6 cylinder engine. 9 ft bed. Runs great, 4 wheel drives works, head lights, tail lights are all operational. Has some rust in factory floor boards in the typical spots. Really neat old truck with a lot of potential. Located in Prineville Oregon. Idaho title. $9,500.00 OBO, cash only, no checks please. |
Re: NAPCO Thread
That is one of the coolest NAPCO’S I’ve ever seen !
|
Re: NAPCO Thread
That is a cool truck. I've never saw one on that body style
|
Re: NAPCO Thread
Nice example of an early NAPCO at a price that seems quite fair. I love that thang!!
|
Re: NAPCO Thread
I think it’s sold, unfortunately not to me :waah:....update 7/15/2018 it has sold to some lucky guy. You’ll probally never see another
|
Re: NAPCO Thread
1 Attachment(s)
I just can't even begin to tell you how much I want this...
56 1-ton Fish and Wildlife NAPCO conversion. https://humboldt.craigslist.org/cto/...620115003.html |
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
The listing stayed till it expired? Wow, hard to believe. I feel the same way about it (I think). V8 truck, 1t, traditional Dark Green, fish & wildlife. You better believe that would be restored right back to all that if that truck was mine
|
Re: NAPCO Thread
Another rare 4X4, a Coleman, not a NAPCO. A cool suburban though...
https://portland.craigslist.org/yam/...646137414.html |
Re: NAPCO Thread
That's a decent price. Especially if you have a decent Burb or panel to convert to a 4x4.
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
3 Attachment(s)
Have seen these ads or this truck yet, thought I'd share!
|
Re: NAPCO Thread
Quote:
https://s8.postimg.cc/l80jco6dh/3_F2...9_B1_BAC56.jpg |
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
Quote:
|
Re: NAPCO Thread
That fella sold before I ever got a reply
|
All times are GMT -4. The time now is 09:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com