Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Ok Who left the north door open it was 70 Saturday this morning it was 29
spent the in the shopr repainting the dash I wet sanded it with 600 grit to get it down to the base coat to repaint it . it would lift i try to use a primer to keep it from lifting no go . so i just stripped it back down to bare metal reprimed and reshot the the base. and did the colum parts and big block mounts didn't get to shoot the clear i need one more good coat of base . Dad thought i was crazy for shooting when it was 31 out side and wind blowing around 20 to 30 miles an hour .. but the shop was 75 in side :devil::metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:waah::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
and after the prime and re shot f the dash :chevy:
|
Re: 1965 chevy truck one piece @a time
Way better.
|
Re: 1965 chevy truck one piece @a time
:metal: Thanks Bomp and i havn't cleared it yet :lol: I'm thinking maybe by next weekend & load it on the trailer and take the frame and cab to the shop to have the BB put on the fame and mount the cab on it to :metal:
|
Re: 1965 chevy truck one piece @a time
Looking good. Can't wait to spray my interior. Should be soon.
Bret |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
loaded the frame its off to the shop for the trans plant 572 here we go..
also cleared the dash and it was around 74 today . and letting the heater run un till 10 p.m to let the clear cure out for 4 hours in 70 dergre heat :devil: :chevy: also primed and painted the ac vents to for got that |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:sumo:
|
Re: 1965 chevy truck one piece @a time
572 huh. Carbed or Fuel injected?
|
Re: 1965 chevy truck one piece @a time
its carburated i get the transmission in the morning and the fun begins
the first thing will be knotching the frame for the motor mounts ill take the cab and bed later in the week :lol::chevy: |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
Here is a couple of shots of the truck @ the shop sorry about the pics
there from my cell phone not real good pics but just a little update . took the frame in on monday cab in on tuesday and the bed in this morning at noon there was nothing on the frame and @ 6 45 p.m this is what i see :metal::chevy: ill get some better shots with my camra tomarrow nite |
Re: 1965 chevy truck one piece @a time
572… :jdp: :metal::metal::metal:
|
Re: 1965 chevy truck one piece @a time
Went by last nite to see what was done . and they remounted the cross member for the transmission mount up a little . looks like the cab will be ok
so no cutting of the fire wall . will post pictures Monday camra died last nite |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Went by the shop on the way home after work .. They had the body on the frame :metal: and then they tell me it not up where it goes .
Its time to cut up the fire wall . the fire wall is hitting the valve covers :waah: But good thing i didn't have it painted yet. but here is a couple of pics so far .. |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
Not much to report from last week, went by the shop tonite they started the cut and shop and rebuild of the fire wall . so here is a couple of pics .
the radiator should be in Wed to see were the electric fans will go will have more pics later this week:sumo::metal::chevy: |
Re: 1965 chevy truck one piece @a time
Good thing you caught the firewall to valve cover clearance issue now. whew.
That 572 is a MONSTER |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Just went by the shop to pick up the doors so i can work them over befor they need them back . and this is what they did on the firewall today
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
:uhmk:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Just a couple of shots of the fire wall they ad to refit the pass side panel
a male it a little taller so we can take the covers off . and made the contur look like it was factory .. they should have it done Friday .:chevy: and a couple from is side the cab were the removed the pedal holes and e brake hole will re drill and go from there :chevy: the first pic is for the truck bed for added weight for the truck to hook up will put the wood bed on top and 67-72 inner wheel wells |
Re: 1965 chevy truck one piece @a time
Very Nice! :metal:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
went by the shop after work and took some shots with my cell phone sorry if the pics look
fuzzy . they had the cab in place and the fire wall smoothed out pretty good the want the rear well wells so the can cut the metal for the bed to see how low the rear sets on the back so if i need to but drop spindles next week a long with the wheels for the right off set . |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:metal: more pics you know you like um :lol::chevy:
|
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
here is a couple pics from the last two days at the shop ..
They cut and mocked up the inner wheel wells for the poor man prostreet and cut the metal plate next will be welding the angle strips in then have the plate and bed line x then when i get it home ill install the wood after i sand and poly the wood ... :metal::chevy: i likes how the plate has all the holes cut already no drilling . Took Murry an hour to program all the setting on the cutting table and 15 min to cut the plate . |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
little update to night they capped the ends of the bed also filled in the stake
pockets primed and painted the metal plate for the bed and cut and trimmed the wood for the bed .. i hope that will add enough weight to the rear to keep the tires from spinning :metal: next week ordering wheels tires and drop spindles is sitting to high for the look i'm going for :chevy: |
Re: 1965 chevy truck one piece @a time
Looking Good! :metal:
|
Re: 1965 chevy truck one piece @a time
I really like the look of those bed rail end caps... :metal:
|
Re: 1965 chevy truck one piece @a time
Quote:
|
Re: 1965 chevy truck one piece @a time
Quote:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Ok it been little over month and a hafe no updates lately .
i when a got the cab about a week ago to prep the fire wall to paint i bought some drop spindles for it 2 1\2 and the wheels are ordered should be here tomarrow along with the wheel paint. the rear rims are 15x12 and the fronts are 15x6 with 26 inch front runners with 15x31x16:metal: |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
ok so i goofed on the tires 31x16x15 :lol: just a couple of more
they will work on it a little tomarrow and thursday then off to the LSRU in Austin . and if its not raining :waah: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Spent a little time in the shop tonite rains coming back for the weekend :waah:
need to get the new wheels painted and going tomarrow to get the tires mounted .:metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
the fronts are 15x6 3 in back spacing rears are `15x12 9 inch back spacing :metal::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
finally a project that didn't take a month do get done ! got the tires mounted and rims painted in 24 hrs :lol::metal::chevy:
|
Re: 1965 chevy truck one piece @a time
That little air breather filter on your rear differential, any chance you could tell me where that came from?
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
Hi Murphy i bought it at oreally's auto parts in there speed section in the store should find it any were its called a spectre cone filter
here's a pic |
Re: 1965 chevy truck one piece @a time
Those are some huge big meats on the back!
|
Re: 1965 chevy truck one piece @a time
Quote:
thanks !! :metal: |
Re: 1965 chevy truck one piece @a time
9" of back spacing. Holy Smokes Man them are some monsters. Dig It!
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
went by the shop tonite and took some shots of that they did from tuesday
and wensday first couple are from tuesday nite with the taller spring in the rear and bump stops in .. took the bump stops off and went smaller on the rear coils and more room and no rub issues:metal: |
All times are GMT -4. The time now is 12:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com