The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 8 of 8 « First 34567 8
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)
-   -   61 Ford unibody project (https://67-72chevytrucks.com/vboard/showthread.php?t=623422)

ratty 46 03-31-2015 06:52 PM
Re: 61 Ford unibody project
 
Ya ... should have re-read my earlier post - sorry :( - my bad. Leave it alone ...

JakeDW 06-20-2015 12:11 PM
Re: 61 Ford unibody project
 
Finally bought the accuair rocker switch system and manifold for the ole girl.And started some work on the bed.

Jake

JakeDW 06-29-2015 11:13 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
Got the sencers on time to get it wired up I have the ILevel comming.


Jake

Number98 07-02-2015 11:14 AM
Re: 61 Ford unibody project
 
Very Cool!

JakeDW 07-03-2015 01:09 AM
Re: 61 Ford unibody project
 
Quote:
Originally Posted by Number98 (Post 7228673)
Very Cool!
Thank you.

Jake

tommys72 07-03-2015 01:20 AM
Re: 61 Ford unibody project
 
If I get over to KC I gotta meet up with you and see this truck in person

JakeDW 07-09-2015 11:03 PM
Re: 61 Ford unibody project
 
Quote:
Originally Posted by tommys72 (Post 7229347)
If I get over to KC I gotta meet up with you and see this truck in person
Sure man.

Jake

JakeDW 07-09-2015 11:05 PM
Re: 61 Ford unibody project
 
I pulled the trigger on some 20in Mobsteels should have then in a coupe weeks.The street rod wheels were just not doing it for me anymore.

Jake

67chevy1series 07-10-2015 12:08 AM
Re: 61 Ford unibody project
 
Awesome uni! Really like these unibodies. Awesome choice with the steel wheels, can't wait to see what they look like on the truck

JakeDW 07-20-2015 09:15 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
Got off my lazy azz and got going on the bed.

Jake

JakeDW 07-20-2015 09:18 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
Got the tubs and front rear and side panels made welded in bed floor is just sitting there in the pics. I made a place for doors in the rear so I could get to my batt and accuair from the top.

Jake

JakeDW 07-20-2015 09:21 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
I did not want to cut up my dash so I made a mount for the rocker switch
For the accuair I bought the Ilevel it's pretty trick most likely will never use the rocker switch but nice to have if something happens to my phone.

Jake

JakeDW 07-20-2015 09:36 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
I also got this 60s diamond top Coleman cooler stripped to match the truck.

Jake

JakeDW 07-20-2015 11:11 PM
Re: 61 Ford unibody project
 
Quote:
Originally Posted by 67chevy1series (Post 7236385)
Awesome uni! Really like these unibodies. Awesome choice with the steel wheels, can't wait to see what they look like on the truck
Thank you.

Jake

Low Elco 07-23-2015 12:54 PM
Re: 61 Ford unibody project
 
Good lookin' stuff! Can't wait to see it in September!

JakeDW 08-02-2015 10:52 PM
Re: 61 Ford unibody project
 
Quote:
Originally Posted by Low Elco (Post 7251325)
Good lookin' stuff! Can't wait to see it in September!
Thanks man.

Jake

JakeDW 08-02-2015 10:59 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
I got my Mobsteels and paint matched them.

Jake

JakeDW 08-02-2015 11:01 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
Pic of the truck with the trim rings and 60s vintage dog dish poverty caps.

Jake

JakeDW 08-02-2015 11:18 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
Close up of the front wheel.
Jake

aggie91 08-03-2015 08:35 AM
Re: 61 Ford unibody project
 
Those look great on there. Good choice!

JakeDW 08-03-2015 01:10 PM
Re: 61 Ford unibody project
 
Quote:
Originally Posted by aggie91 (Post 7262144)
Those look great on there. Good choice!
Thank you.

Jake

69short 08-08-2015 12:52 AM
Re: 61 Ford unibody project
 
What part of KC are you in? I'm just north of KC and work down there often. Good looking truck

JakeDW 08-08-2015 06:36 AM
Re: 61 Ford unibody project
 
Quote:
Originally Posted by 69short (Post 7267156)
What part of KC are you in? I'm just north of KC and work down there often. Good looking truck
Thanks ,I live south of KC in Belton.

Jake

JakeDW 09-04-2015 06:43 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
Just about everything welded in so much more work to do but at least some progress.

Jake

JakeDW 09-04-2015 06:44 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
Got a new back seal new green glass.

Jake

CG 09-04-2015 08:05 PM
Re: 61 Ford unibody project
 
Truck is really coming together, did you get much seat time this summer?

JakeDW 09-09-2015 04:55 PM
Re: 61 Ford unibody project
 
Quote:
Originally Posted by CG (Post 7298701)
Truck is really coming together, did you get much seat time this summer?
Thanks I drive it about 2 or so times a week.

Jake

JakeDW 09-09-2015 04:58 PM
Re: 61 Ford unibody project
 
1 Attachment(s)
A pic.

Jake

tommys72 09-11-2015 12:16 AM
Re: 61 Ford unibody project
 
Loving it man!


All times are GMT -4. The time now is 08:20 PM.
Page 8 of 8 « First 34567 8
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com