![]() |
Re: '64 chevy 2wd to 4wd
LOL....sounds like you and the glue are at war...the truck's looking great though. Keep it up.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah, i don't know Dale, going threw a spell-age maybe.....
you should see the floor under my bench, glad i got extra laminate....& when you spill it on your pants, they become stiff as steel...:lol: wife's paint i found did'nt pan out, thinned it right down & still thick & lumpy. i sprayed the int with it & it covered the door & window crank completely. i liked the color though, think it's called "nutmeg", so i left it there & glued some plastic over the cranks to kinda 3D them. the bench is a shortened & raised one from an impala Attachment 1396093 found this color (dont photo worth a darn) but it will work. the rear view is more the color....kinda....nutmeg... just dropped the body on the frame to check, made a stupid mistake & did'nt catch it, the 454 is longer & puts the fan right into the rad-going to have to figure something out without making a huge mess (1 step forward, 3 steps back.....) Attachment 1396091Attachment 1396092 and been searching hard for boxes for the crew, which will cost me an arm & a leg, but i did find this on the net, i can build it for free, fits my cheap theme, & i could build it like the picture for free (got lots of stocker stuff), but i blew my cheap theme all to heck & ordered a whack of swamps, axles, t-case's.....bout $60 worth so i can build a "ALPINE" off-road rollback, companion to Light Rescue 168.... Attachment 1396094Attachment 1396107 |
Re: '64 chevy 2wd to 4wd
I like the color, it has work truck feel to it. Truck looks tough. I like tow trucks, roll back would be cool.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah, it would be waaay cheaper (like free!) to do a rollback than get 2 shorties to make a LB.
managed to get out of my screw up. cut the rad out of the core & shoved it forward-works! yay, cause it's forward now, the hood dont close.... Attachment 1397022 heck with it, more modern rad for the BB anyways Attachment 1397023Attachment 1397024 just wanted to see how the body lines up.... Attachment 1397025Attachment 1397026 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
chassis is almost there....
them bleeping exhaust pipes gave me a major headache...:cuss::censored::banghead: yeah, their strait with ONE bend, should be quick & easy-4 bleepin' hrs, & i dont know why, done way more twisted pipes faster......vette muffs Attachment 1397029Attachment 1397030 Attachment 1397032 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
well my day got off to great start....
first thing this morning, a piece of metal tagged my thumb, felt it hit the bone.... should have went for stitches, but we were on the far side of Harrison lk, 'bout 40 mins to the walk-in, & we had a few passing showers, so i really could'nt comfortably go anyways with the roof half done.....plus i NEED the hrs.... i'm going to try finish the cameo, then take a break for a week or so. trying to build models with 1 thumb is like.....hmmmm, trying to pick your nose with your big toe :lol: Attachment 1397266 |
Re: '64 chevy 2wd to 4wd
man, i should have stayed in bed today....
attempted to one thumb the windows in the cameo, spilt thinner all over the windshield. wiped it off right away, but 10 mins later the old plastic started cracking up-bummer! so it's on indefinite hold till i can find a windshield. really hoping someone on my model forum comes threw....figures....:waah: |
Re: '64 chevy 2wd to 4wd
Ouch!!!! I suggest you let that heal up a bit. Does the bone feel like it's bruised? If so that takes a while to quit hurting. Not to be a smart acre or anything but that would have been a good candidate for the super glue to close it up....
|
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
Quote:
notice to self-attach super glue holder to work belt.... and yeah, it stings, worst part is every time i bend my thumb-rriiiip!! but this hurts worse...:waah: Attachment 1397656 edit, more crap, in 15 mins on the way to the dentist to have my mouth ripped apart-yay! |
Re: '64 chevy 2wd to 4wd
Should of stayed in bed? Hell no, you should be hiding under a rock....:lol: On the bright side, maybe the dentist will give you pain meds that will help the thumb too. I hope you can find another windshield fairly easily. I guesstoday was feathers...
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
hiding under a rock? heck, dam rock fell on me! :lol:
and oh yeah, dentist nailed me good, 2 cavaties. she shot me EIGHT times in the mouth, my lips were draggin' on the floor when i left there..... so to make myself feel better, i went & put 3 mos insurance on the crewcab, YAY! (just hope the cops dont bug me over a ripped ins. decal, yes it stuck to my finger & ripped in half...) Attachment 1398359 one good thing about getting sheet metal cuts on your hands, the cuts are clean & narrow (and usually deep) my tumb is closing up real nice, have a scar, but chicks-nope scratch that, my wife loves scars... cleared off my bench so nothings around me & started cutting up a rollback. this was as far as i got before i ran out of c-channel & tubing (which i went & got today...) Attachment 1398358 at least the int is free, this is what i got, i started cutting them apart last nite, but i'm really thinking just make a new int tub. i'm low on bench seats, so i'll prob cut out them molded ones & re-hash them Attachment 1398357 and the best news, buddy on the model forum has a '55 window YA-HOO! |
Re: '64 chevy 2wd to 4wd
Great news on the healing and windshield. You can crawl out from under the rock now....lol. Roll back bed is looking good. I've been driving my K30 crew the last couple of weeks, it's kinda cool.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah, i been walking softly lately Dale, was doing good till sat.
making bad choices again....:lol: decided to pick up a few extra hrs at work, went in on sat to fix one of the truck racks (good decision) things were going good till it came time to weld every thing up, SOMEONE "borrowed" my welding gloves & did'nt put them back. decided to use regular work gloves (bad decision....) as you can guess, a bunch of sparks went thru them in a tenth of a second, too bad it took me 10 seconds to start smelling "steak".... i gotta cut this out, turning this into a blood & gore thread....:lol: Attachment 1399655 but i still managed to get a start on the rollback... Attachment 1399635Attachment 1399637 Attachment 1399639Attachment 1399642 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
here's what it looks like on the crew
after i get a cab floor in it & see where it will sit on the frame, i'll make a headache rack for the front of the deck, want it to be just a touch higher than the cab Attachment 1399656Attachment 1399657 |
Re: '64 chevy 2wd to 4wd
Safety First....LOL!!!! Good thing you have a good nose. Rollback looks awesome. You're right the headache rack should be a touch higher than the cab. That way the lightbar is visible from both ends. Are you going to fab a towbar/wheel lift for the back?
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yes, i am Dale...
Attachment 1400523 tucked up under the frame... Attachment 1400524 extends & rotates, tire arms slide in & out.... Attachment 1400526 drops down to load.... Attachment 1400525 still got a lot to do, all rough right now, frame needs rivets, hyd. tank & lines, sideboxes..... Attachment 1400528 |
Re: '64 chevy 2wd to 4wd
Awesome!!!! It looks fantastic!!! Are you doing this from memory or a certain brand. It's looking a lot like a Jerr Dan, Century or Chevron to me.
|
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
actually i was just trying to make it simple & this is what it's looking like.
looked at a few online, but i did'nt really pattern it off any one specific picture... hoping my swamps for it will be here next week. and seeing how it's a ROLLback, & i got this ford, just dawned on me to build it like a normal 4by that was rolled. flatten the roof a bit, busted glass, some dents, a flat tire so it's got a 3 legged dog lean.... Attachment 1400560 |
Re: '64 chevy 2wd to 4wd
It's looking fantastic, I think that's a good use for the Ford.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yup, it would be a good use for a ford!
ok, wow, when it rains it pours....needed a window for the '55.... found a local guy with a HUGE collection of models, some very rare & cool kits, old Jo-hans, tractor trailers, planes, fire engines..... snagged these 3 trucks for $35 another '55 (a stepper though) a '90 stepper, & a '59 elco. i have the '59 already, i tubbed & caged it, so you know where this one is going-up....:metal: also have the '90 already too, but i'm glad i got another one. i built mine to resemble my 1:1 '90 step, & was almost going to tear it down & rebuild it-higher....:metal: Attachment 1402856 also bought this box off him for $15.... Attachment 1402857 hmmm.... the '56 is basically just a shell, the 150 step is all there, but looks like a ford should....:lol: (maybe "roll" this one for the back of the rollback...) the ranchero is actually quite nice & well done-mite just leave this one alone- for now.... Attachment 1402861 this made the box worth it! another'55 cab, another nicely done '55, & a 454 SS with a monkey paint job, but it's all there (dont have a '88-'98 sb fleetside in the collection-& already a big block to boot) thinking of either turning the '55 into a suburban (ala napco), or seeing how i got all these cabs- a '55 crewy....:metal: Attachment 1402862 a bag of junk in the bottom, like them oxy-acytelene tanks... Attachment 1402863 he also has another box, chev dually (like the red one i just built), a '78 blazer, mike skinner goodwrench no. 3 truck, & a topless s-10 that he wants $15 for-i got a feeling i will be going over there later again....:lol: i'm going to snatch the windshield out of the green '55 for now so i can finish the cameo, i'll replace it with the window buddy is sending me. should have the cameo done pretty quick now.... |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
Nice score on the box and stuff. The truck looks great, nice job!
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
scored more....$15 box blazer looks to be mpc snap-tite rescue blazer. un-built no-box goodwrench nascar truck (already have, but lots of parts), another 2wd dually, & a topless s-10. not into the s-10, but it does have nice rims Attachment 1403406 Attachment 1403407Attachment 1403408Attachment 1403409Attachment 1403410 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
there was also a set of BF baja T/A's in the box
Attachment 1403419 and this, yeah, a car, but it was thrown in on a trade (who dont like black T/A's?) Attachment 1403420 then i stepped completely out of my building boundry's & bought this for $20. why? dont know, just looks COOL! he also has the matching pumper truck & boom truck................................. Attachment 1403421 box is beat to heck, but everything is there, all "over 300 parts" of it. not sure, but guessing the first issue of this model (early '70's...?) the prices on the back of the instruction sheet sure look like '70's era.... Attachment 1403422Attachment 1403424 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
and look at what the post man just dropped off 5 mins ago :metal:
i wish all days were as good as today....:lol: raft of swamps for the rollback Attachment 1403435 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
now that i'm done playing with my new junk, see how them swampers are going to look
maybe shorten the wheelbase a small bit Attachment 1403590Attachment 1403592 that blazer is to nice to rob the hood from, so fix what i got.... dont know where the other piece is Attachment 1403593 it's to narrow too.... Attachment 1403594 still needs work, but i'll do that at final bodywork- tired of sanding right now.... Attachment 1403601 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
been getting some of the basic's done. lots of trial & error & FITTING!
nothing glamorous been spending too much lately (according to wife...) so i did'nt order my $30 one ton rims. using the rims from the sneaky pete. besides not being close to fitting, they will need lock-outs & axle/axle flanges. what a boring thing to do....sand, sand, sand Attachment 1404073 made a few changes to the frame, started adding rivets Attachment 1404074 and finally got some kind of tub happening. was going to build one, but it would use up my 030 stash, & i'll need it for later. seeing how 'bout 91% of it is out of my junk box.....hate them ugly molded seats- at least they match:lol: this is what i got so far after figuring it all out, i will make door panels, window cranks, seatbelts,...... Attachment 1404075Attachment 1404076 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
well, the tub fits nice, i have a floor. now i can get going. just have to mock up a drivetrain & mounts. thinking i should have bought 44's or 49's, them 38's look small......
Attachment 1404079Attachment 1404080 |
Re: '64 chevy 2wd to 4wd
Man, you been busy while I was up north at my cabin. It all looks great and I agree about shortening the wheel base. I like the 38's. The front end would sit a little higher with a load on it. So with a truck up there it will look correct. I'm also liking the detail (rivets). Nice attention to details. Keep it up!
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
hey, it's always great to get out!
got a question, prob simple & stupid to you, but i have'nt drove a rollback, nor can i find a pic on the computer- are the deck controls mounted to the deck? or stationary & mounted to the frame? Attachment 1404706 gathering parts from my stash, only matched part of the 454 is the block/tranny. everything else is mis-match..,..:metal: getting good at scratchin' air cleaners... Attachment 1404707 some cab work the firewall is from the sneaky pete kit, has a mini kenworth nose, so after a bunch of grinding- got it into a squarebody. lost the floor ribbing sanding the bejeezus out of it, so laid some strip styrene over what was left. will putty it up & smooth it & hopefully look like actual cab ribbing Attachment 1404708Attachment 1404709 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
have a warn electric winch i was going to use on the deck, but it looked TINY & WIMPY on there....went looking for a pic & see some of the older trucks are running worm gear winches. i think a worm gear with cogged wheels looks more interesting then a wimpy electric, so i ripped apart a old car cassette player, hoping to get one or 2 decent size wheels. boy, was i surprised when this many came out of it....
Attachment 1404712 but i'm really liking these things too, whatever they are....:lol: couple yr supply of oil filters. couple of the bigger ones on the hydraulic tank..... Attachment 1404713 this is what i got so far.... Attachment 1404711 and check these babies out! guy on the model board is casting these, i ordered 4 racks of them- $3 a rack. wish i had these yrs ago.... and another dude from canada (less shipping/ no exchange :metal: ) is casting me up a couple of sets of some beauty 1 ton rims, & only a buck & a half a rim Attachment 1404714Attachment 1404715 |
Re: '64 chevy 2wd to 4wd
The bed controls are frame mounted (stationary). Standard equipment is on the drivers side. Optional dual controls are on both sides. Air cleaner looks great. Everything is coming out nice. Creative thinking on the wideband using the transistors as oil filters.
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
yeah i put one of them on the engine block & it does look just like a oil filter...
not a lot of progress, was working out of town for a couple days....here... Attachment 1406327 how awesome is that! started making some door panels Attachment 1406329Attachment 1406331 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
that $15 box of junkers is coming in handy.....
snagged a fuel tank from one. made up some sideboxes. "latches" are ford explorer door handles... Attachment 1406332 some bed controls Attachment 1406333 put a hydraulic cylinder on the wheel lift. am in the process of making a hydraulic tank to mount behind the pass sidebox. will be fairly easy to mount a control valve & lines & plumb the rams with them right across from each other... Attachment 1406335Attachment 1406336 |
Re: '64 chevy 2wd to 4wd
How did you get any work done. I would've been fishing. LOL...Everything else is coming out great. I just got home from a long weekend at the cabin.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
my fishing license expired!...:dohh:
soon as i found out it was a metal roof & we were taking the flatdeck trailer, tried to slide my quad on the back of it, but the boss was'nt going for it.....:waah: so i finally got all the hard points, locations etc. changed the firewall, needed inner fenders, so into my new $15 box & strait to the s-10 (knew it would come in handy....) a little chop work... Attachment 1408744Attachment 1408741 into the stripper.. Attachment 1408742 started a visor, & a hydraulic tank. the pencil line is how much i cut-off to get the rear wheels where they needed to be Attachment 1408745Attachment 1408746 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
here's what it looks like jammed in the crew. also made a rad support. the holes in the ends are to clear the headlights. will put dual batts in to cover them up
Attachment 1408757Attachment 1408758 the finished visor Attachment 1408759 rudimentary control valve. will plumb it with hard lines on the frame (easiest) with hoses at the rams. also got my engine/tranny mounts located & in Attachment 1408760 rear axle & springs are built & almost ready to go in. notice the hyd tank is narrower... Attachment 1408765 |
Re: '64 chevy 2wd to 4wd
It's all looking great. The details are looking good. Totally awesome.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale, been a slow go, lot of unseen boring work scratchin' it.....
did manage to get the springs in so it can stand by itself now Attachment 1410624Attachment 1410625Attachment 1410626 see what it's looking like so far..... Attachment 1410627Attachment 1410631 |
All times are GMT -4. The time now is 04:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com