![]() |
Re: '63 GMC Project
No bodydrop, just an aftermarket raised front crossmember kit to lay frame. The body on these trucks sit down over the frame rails so the pich welds are almost even with the bottom of the frame.
|
Re: '63 GMC Project
cool thanks! So did you have to re-enforce your fenders being that you took out the inner fenders?
|
Re: '63 GMC Project
I haven't yet but I do want to.
|
Re: '63 GMC Project
man the winters there must suck.. i dont even put my bike up for winter..lol
|
Re: '63 GMC Project
Quote:
Winter brings so many considerations to the table when it comes to these old rigs, not the least of which are loose gravel from road sanding, and idiot drivers that dont realize that 2k pounds of metal, glass, plastic, volitile fuel, and human bodies all zinging along on 4 donuts of air filled rubber takes some thought and skill when doing 40 to 60 mph on a sheet of ice.... Seems like as soon as more than an inch of snow lays on the ground, red lights at intersections just become "suggestions" to some of these retards. Obviously not the conditions you want to be driving something you really care about out into. Creep... totally dig your art work man, just saw it over on Vs page! If it werent for the nudity and obvious copyright issues I would post more of mine. But I have to keep the decorum yanno? |
Re: '63 GMC Project
Thanks! I know what you mean about the winter drivers. They either act like they have never driven in snow or they act like there isn't any snow on the ground at all.
|
Re: '63 GMC Project
2 Attachment(s)
Since my 63 is stashed for the winter I decided to start a new truck project...
...gonna try to make a replica of my truck out Hot Wheels using 2 '62 C10s and 1 '64 GMC panel. Here's where I got with it today... |
Re: '63 GMC Project
5 Attachment(s)
Here's some pics hopefully explaining what I did.
|
Re: '63 GMC Project
Quote:
Ohhh yes!! Sooo much better without those big mirrors. One of the first things that I have done when I got mine. Man the engine looks freaking awesome! Great job! Btw very original shift knob! :) Again love your progress! Great job homie! |
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
4 Attachment(s)
More...
|
Re: '63 GMC Project
Tomorrow I'm gonna go find some paint and maybe another Hot Wheels (or similar scale ) with white walls to use. I was planning on using the hood from the GMC panel but it is slightly wider and I don't think I want to mess with it that much.
|
Re: '63 GMC Project
Thanks VeronikA.
|
Re: '63 GMC Project
Wow, awesome little hot wheels project and a great truck that you are building. It was great to see that you got into the Classic Trucks Magazine! Keep up the cruising and shows and working on your truck. Of course, if I ever get a truck project up here in Alaska, it will be 4X4 and going up, not lower.... hard to drive a low riding truck on our ice road (frozen Kuskokwim River)....but I enjoy reading about yours, so keep up the great job!
|
Re: '63 GMC Project
Thanks! Lifted trucks are cool too. Someday I'd like to have one but I'd probably just embarrass myself every time I got in or out of the thing.:lol:
|
Re: '63 GMC Project
hey bro can you remind me of what your running for a couple small details..
EDC? (I have two viair comps but not sure where I want to locate them) Tank? (size and location?) what is the bolt on rear bag mount kit you have? and what type of front bags? I've been driving Belle around a lot lately, put about 60 miles on her yesterday and the texas rake is killing me. time to bag her already :D hoping to have her laid out before the first show this spring. |
Re: '63 GMC Project
1 Attachment(s)
I have a 5 gallon tank mounted at the rear of the frame between the rails and a Viair 480 on the outside of the frame rail. The rear is a Superlift wishbone kit from Quality Air Ride (formerly *****************). The notches, upper shock mount bar and axle tabs still need welded but everything else bolts on. I am using Airlift Dominators all the way around.
Here's a pic of the bed. You can see the tank and mount we made right in front of the tailgate. |
Re: '63 GMC Project
Sweet truck :metal::metal:
I like the die-cast cars/trucks too. A friend mine takes them apart and customizes them too. He's a hot-wheels junkie :lol: . |
Re: '63 GMC Project
thanks man! I got some work to do me thinks!
|
Re: '63 GMC Project
3 Attachment(s)
I painted the Hot Wheels today. It came out OK I guess. I don't have a very steady hand when it comes to holding a paintbrush. The cell phone pics are kinda grainy so I'll try to get some better shots with a real camera.
|
Re: '63 GMC Project
nice job on the patina I dig it
|
Re: '63 GMC Project
very cool! shakey hand or not...how'd you achieve the rusty spots (patina), or is it just hand painted as well?
|
Re: '63 GMC Project
nice job on the hotwheels clone
|
Re: '63 GMC Project
1 Attachment(s)
Quote:
Short bed fleetside. 9" lift, 62" tires, SBC 350, 4x4 (just had new hubs put in last summer) Posi rear (will look at the gears next summer when I am home). We got it because our 14 acres is 6 miles from the nearest paved road, and we get 4feet of snow in the winter up (down?) there. Awesome fun truck to drive. Is nice to be able to look truckers in the eye at stoplights ;) |
Re: '63 GMC Project
Thanks guys, and yes the patina was done with a brush.
The Beast looks killer! Just about the perfect amount of lift and the tires fit the lift perfectly, in my opinion.:metal: |
Re: '63 GMC Project
I found some more pics online. These where on dropjawmag.com.
http://i9.photobucket.com/albums/a91...DSC01764-1.jpg http://i9.photobucket.com/albums/a91...DSC01765-1.jpg http://i9.photobucket.com/albums/a91...DSC01766-1.jpg http://i9.photobucket.com/albums/a91...DSC01757-1.jpg I don't remember where I found this one. I think it was Stylin' Trucks facebook page but I'm not sure. It was taken at a show they had in their parking lot. The red Sonoma next to my truck belongs to my friend. http://i9.photobucket.com/albums/a91...18497416_o.jpg |
Re: '63 GMC Project
Way Cool, Love that truck. That engine is looking clean in there also. I got my eye on a local all OG patina long bed....cross my fingers....
|
Re: '63 GMC Project
Thanks Jesse. Good luck getting the longbed.
|
Re: '63 GMC Project
Another member asked for pics of my Astro so here you go...
http://i9.photobucket.com/albums/a91...p/be67391f.jpg http://i9.photobucket.com/albums/a91...p/251cd425.jpg http://i9.photobucket.com/albums/a91...p/2a943a15.jpg http://i9.photobucket.com/albums/a91...p/6512aea2.jpg http://i9.photobucket.com/albums/a91...p/DSC01691.jpg I've changed the corner marker since to a light with a black bucket. http://i9.photobucket.com/albums/a91...p/0006252c.jpg Haven't really touched the van for over a year. It needs reprimered/sealed and cleaned up, the wheels look horrible now. May get them and the grille powdercoated satin black. I also have a solid slider and a set of dutch doors for it if I ever get motivated. |
Re: '63 GMC Project
Your Astro is the one that made me decide to get a phantom for my Safari. Also where did you get them marker lights? They look good!!
|
Re: '63 GMC Project
http://i9.photobucket.com/albums/a91...p/DSC05440.jpg
were did u get ur brake system (Brake booster,Master cyl) would it work on '65 gmc long bed?? Bad ass truck u got :metal: |
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
thanks by any chance u dont have the part # for it??? did you put a distribution block on it for the brake lines??
|
Re: '63 GMC Project
I think it was astrosafri.com. Your 63' and ur Astro are Badazz tho. How is the rear bag set up on it?
|
Re: '63 GMC Project
1 Attachment(s)
Quote:
|
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
|
Re: '63 GMC Project
Awesome build creep! any updates?
|
Re: '63 GMC Project
Not really. Just started driving it again now that the weather is getting nicer. I did have to fix one of my airlines going to the gauges because the fuse for the fan melted and got the line hot enough to cause a small hole in it. Still need to rewire the fans though. While the weather is nice this week I'm going to try to get it to an exhaust shop and get that finished up.
|
All times are GMT -4. The time now is 06:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com