Re: Lets Play Whatz It? !!
I know!!!!.... thats a dew-hickey
|
Re: Lets Play Whatz It? !!
The dial is a timer.
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
i put this pic on facebook
|
Re: Lets Play Whatz It? !!
is it fer a camera?
i think i have seen that logo on one before |
Re: Lets Play Whatz It? !!
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
For Polaroid Camera:
For use with 100- to 400- series folding pack cameras Friction-fits over shutter button on folding pack cameras. Mechanical wind-up timer mechanism can be set for between 5 and 15 seconds of delay. Notes: Earlier production models lack time delay calibrations where you can set from 5s to 15s or so. |
Re: Lets Play Whatz It? !!
There you go!
|
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
watz it ??!!??!!?!
|
Re: Lets Play Whatz It? !!
Compression Spring Tester according to what you named the picture...
:lol: |
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
lol oups:P
|
Re: Lets Play Whatz It? !!
Why don't you go again, I don't have anything fun in front of me to take a picture of.
|
Re: Lets Play Whatz It? !!
:lol::metal::Own:
|
Re: Lets Play Whatz It? !!
Who's turn ?..............
|
Re: Lets Play Whatz It? !!
2 Attachment(s)
Here is an easy one and it is for sale.
|
Re: Lets Play Whatz It? !!
5 Attachment(s)
here is another one, but I don't know what it is. (RULE VIOLATION) this one is free if you pay the boating fees.
|
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
Quote:
one part looks like the spring holder another part with the 360 degree marking maybe to be able to cut two the same |
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
Quote:
What is the other one? I have been asking for years and can't find out. It is made by Allen electric. They made electrical test equipment. I hope one of the computer wiz kids can find it somewhere. I can't. |
Re: Lets Play Whatz It? !!
Quote:
You are too good to play any more. just show the whatz it stuff. I will dig around and look for something else. |
Re: Lets Play Whatz It? !!
Quote:
http://www.distributortester.com/index.asp |
Re: Lets Play Whatz It? !!
somebody put up a pic ...I'm getting bored
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
Automotive, Very rare, used in the 30's to late 50's
|
Re: Lets Play Whatz It? !!
my first thought was to push calipers back ... but they never had hydraulic brakes in the 30's.... some sort of seal installer? im thinking theres another piece to this tool something to catch the little legs on the sides
|
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
king pin presss?
|
Re: Lets Play Whatz It? !!
Rear Spring Shackle Bushing Remover and Replacer ?
|
Re: Lets Play Whatz It? !!
ball joint tool ?
my socket for the 4X4 balls it "screws" the ring in kinda looks about the size of the center bit |
Re: Lets Play Whatz It? !!
Here you go guys, get-r-dun!! http://67-72chevytrucks.com/vboard/s...d.php?t=487664
|
Re: Lets Play Whatz It? !!
Its not for springs or suspension or steering. Its a tool that you would say why the hell did they make a tool for that? It is a Kent Moore made tool.
|
Re: Lets Play Whatz It? !!
wheel stud installer?
|
Re: Lets Play Whatz It? !!
yoke installer, trans or diff ?
|
Re: Lets Play Whatz It? !!
steering wheel installer ?
|
Re: Lets Play Whatz It? !!
Its not an installer of anything, its not for steering or any part of steering or wheels or suspension., Not for the rear end or a yoke. Its used to remove only one item on the car or truck and each vehicle only has one of these parts. It is driveline related.
Its overly complicated for what it does and your going to say what the hell did they make that for? I have never had a time I actually needed it in about 50-60 times I have done this procedure and more times than not the part almost falls out even if its still good. Its also not used to install that same part. If no one gets it I'll post a picture of a tool that is used after it.. Hopefully that will be enough input for you to guess. |
Re: Lets Play Whatz It? !!
I'm going to add it is a GM Kent Moore J tool that starts with 0 that's how old this dog is.
so its j-0XXX |
Re: Lets Play Whatz It? !!
1 Attachment(s)
Clutch Gear Bearing Puller ?
|
Re: Lets Play Whatz It? !!
Quote:
|
All times are GMT -4. The time now is 08:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com