Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Looks like a great run.. MPH is lower than most for that ET.. I ran a 7.3 at 98... WHat gear do you have?

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

thanks, i'm running a 4.10

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

http://i147.photobucket.com/albums/r...ps3cb433bc.jpg
125 shot off the line

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

[QUOTE=flamingbig10;6806926]http://i147.photobucket.com/albums/r...ps3cb433bc.jpg
125 shot off the line[/QUOTE are you still running a truck 12 bolt?

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Yes with 373 and a girdle cover

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

finally broke into the 6,s last night, cant understand why my mph isn't picking up though, any ideas? my time is the one on the left. best 60 foot ever:metal:

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Here's my best all around so far. Something still not just right.

.883 RT (took a little nap)
1.908 60ft.
8.047 594ft.
8.602 1/8th
80.94 mph

69 swb
454 + .30
ZZ502 roller cam, roller rockers etc. mallory distr. 3.73 eaton posi 12 bolt. 295/65 15 MT drag radials.
TH 350 w/ 2200-2500 stall (I suspect this may be alittle tight should be higher)

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

125 shot sprayed at the 60 ft it was about a 100 out during the day
http://i147.photobucket.com/albums/r...ps2870c073.jpg

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

flamingbig10, are you on slicks or drag radials?

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

e/t street drag radials 295/55/15

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

wish i could get a tire with that big of a foot print under mine, on a good day (not a 100 degrees) do you hook good, if you do what air pressure are you running and what kind of a burnout do you do? hope I'm asking to many questions, just trying to get these radial figured out.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Flip,

What radial do you have?
What size wheel?
What pressure you running?
What about shocks and springs?

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

275/60/15 m/t pro radial, 8 inch wheel, seems to hook the best at 16 psi, shocks are just Monroe gas , and springs are 4 inch lowering springs from ccp on the rear, and Monroe gas with drop spindles and 1 inch lowering springs in the front, basically stock suspension. not relly a drag truck but we do take it to a lot of test and tune nights mostly street driven.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

It hook decent on a prepped track I dead hooked on a 125 shot, 18 psi, a small burn out seams like it works

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Just ran this past thursday to get a baseline with my new gears and before i put on my new cnc ported afr 210s and port matched super victor
r/t .122
60' 1.79
330' 5.172
1/8 8.02
mph 85.62
1000 10.51
1/4 12.642
mph 105.85

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

I've got some more tuning to do, but this was the first time out to test and tune. 30 over 454, Comp cams extreme energy xe-268, Performer intake, Q-Jet, Headman full length headers, 700r4, Cal-Tracs, 3.42 10 bolt, with a gov-loc, running on Cooper street tires 275/60-15's. Car number 51, all three right columns, ignore the first column its the other guys.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

10 psi, 4500 lb race weight, E85

https://scontent-b-ord.xx.fbcdn.net/...24159733_o.jpg

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Ran a 6.86@103mph last time at the track...

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

150 shot nitrous outlet stinger on a digiset. New cam and converter for this year. Progressive and electric water pump next

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Posted via Mobile Device
New fastest ET this Saturday
60'-1.565
1/8-7.182
1/4-11.383
MPH-115.47

70 gmc longbed weighs 4300 with me in it
357 aluminum heads
1.9 60ft
8.7 1/8th
80mph
Posted via Mobile Device

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

1968 c10
turbo 355 sbc
borg warner s475 turbo
th350 trans
4130 lbs 3.73 rear gears
ptc 3500 stall


1.5 60 foot
6.46 @110 in the 1/8th
10.09 @131 mph in the 1/4

stock trailing arm suspension, with drop coils, front and rear sway bars added
15 year old napa shocks.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

https://scontent-iad3-1.xx.fbcdn.net...a7&oe=56A609F0

5.3
10psi
4L80E
02-04 LS6 cam
3.25 gears Moser 9"
4100lbs

Now that Drag Week is over, time to turn up the boost and improve those times a little. Hoping for 10's at some point soon. I love this turbo stuff, drive like stock and scream on the skinny pedal.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Had my 82 out at the track on opening night at Castrol Raceway in Edmonton, Alberta on April 29th. Ran a new best! The DA was 2780' and I ran a 11.61 @ 116.10.

Heading back on May 20th to try to better my time.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

This one was an 11.62 run.

https://youtu.be/EFr-XXjOWMU

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

not my best pass, but slowly getting there.
new shocks helped with launches. need to turn up the boost at launch to get the 60' back to what it used to be

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

'52 GMC P/u
7.3L idi n/a diesel
custom intercooled turbo
4 sp auto
dually dana 70
locker
3:54 gears

First time drag racing for me and the truck
low boost 8psi
slipping trans
60ft 2.33
1/8 11.12 @ 60.23
1/4 17.64 @ 75
Slow but lots of room for improvement
A ton of fun

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

78 SWB fleetside, Eagle 383, RHS Proaction 200 heads, th350, 9" w spool and 4.88 gears, caltracs CE 3 ways in front.

Best time to date:

1.628 60'
7.478@90.57
11.885@109.53

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

15.32@86 with 2.4 60'

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

Finally took my 71 swb. My first time going down the drag strip was lots of fun but the reaction time and 60 ft times show I'm a rookie. Truck has a stock ls1/4l60e with stock converter and 3.73s.

60' 2.104
1/8 8.68
1/4 13.57
Mph 99.37

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

I took the '72 out for it's first passes with the 496 I built 2 years ago. Truck pulls great but needs a converter swap, it's way too tight. I also took it across the scales and it weighed 4480 lbs with me in it.

1.78 60'
7.80 1/8th
12.15 1/4 @ 109 mph.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

ADD SOME NITROUS IT WILL Loosen that Ole converter up!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

1st time having the truck at the track, it weights 4000lbs with me it it. A little 357sbc with a 142 supercharger.


Best 60ft 1.923
Best 1/8 8.176 @ 86.06
Best 1/4 12.789 @ 105.61

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

60' 2.168
1/8 et 10.601
1/8 mph 63.17
1/4 et 16.801
1/4 mph 78.01
Dropped .7 et and gained 3 mph from last year

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

just started building my 86 chevy sb. have been racing a 65 elcamino for a couple years now.
.040 sb 400
comp 660 solid roller
callies crank
6 in rods
mahle forged flat tops
brodix cnc track1 heads
brodix hv1000 intake
1050 dominator on 110
9 inch spool with 488's
29.5 9 inch mickey slick
built 350 turbo manual valve body 5500 convertor
car was going 10.20 but didn't handle very good

gonna transfer this set up into my truck over this winter on caltracs

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

That should be fun.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

went efi last winter. 2nd pass on efi, 15lbs of boost. did a little wheelie and ran a 6.43 @109 in the 1/8th. 1.4 60'

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

1974 C-10 Long Bed , Dual Tanks , Trailer Hitch ect.
350ci Edelbrock RPM Heads, Comp XR270, Edelbrock Air Gap, Edelbrock 600cfm.
Th350 2400 Stall
4.10 posi
MT ET Street SS 275/60/15

1/8 mi
ET 9.06
78 Mph
60’ 2.13

Was having carb issues had to baby it off the line. Should be in the high 8’s once i get my carb working right.

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

1.41 60ft
6.19@110 1/8th
9.87@140 1/4

760whp, 315 drag radial, 16lbs of boost. shooting for an 8 second this year!

Re: post latest 1/4 and 1/8 mile times and 60ft.
 

MMM boost