Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Hopefully you can explain the rest of this video....
Sure most health and safety managers would have a heart attack. |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Man glasses and gloves are saviours. Ironworker by trade and have had those zip cuts blow up at full tilt. Pulled a 3" peice out of my arm once. Safety first!!!
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
BRET !!
Thanks for picking up these Blue trucks for us, despite Andy wanting extortionate storage and handling fees...... https://farm8.staticflickr.com/7521/...b0c8b68c_b.jpg The Narrator has said that Andy needs to "just wait a minute" he knows the letter of the law, and extortionate storage fees cannot be tolerated...... We have an enforcer here. http://i294.photobucket.com/albums/m...ps05fd539c.jpg |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Last night Rian and I met midway between our places, dumped his car, then drove over to Russell the paraplegic former fire fighter who now is one of my regular customers, that I do hand control conversions for.
Russell toy fitted with hand controls for track days And... BOY CAN HE DRIVE http://i56.photobucket.com/albums/g1...psc80db68c.jpg When we got to Russell's place and got out, I realised that in the haste to swop cars at home, I left all the adjusting blocks in the Mondeo, so we raced back, fetched and returned. Russell had bought 150mm bolts, so I needed to cut down 26 of them, while Rian removed the existing feet and started to fit the adapters. http://i56.photobucket.com/albums/g1...ps3a41cbff.jpg http://i56.photobucket.com/albums/g1...psf1cc47f9.jpg Next up Russell had to test drive the new, higher seating position. http://i56.photobucket.com/albums/g1...ps96305392.jpg He was a happy man. SMOKIN'...... !!! http://i56.photobucket.com/albums/g1...ps1ff3d20e.jpg |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
That's Awesome!!!:metal:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Well Santa arrived today in a big brown van (UPS)
And he left me this big box http://i56.photobucket.com/albums/g1...ps38fa39e9.jpg I tried to offer him a glass of milk and a mince pie http://i56.photobucket.com/albums/g1...psb111abf3.jpg But he said he needed £50. ($75) instead . I think Santas getting gready When I ordered the panels I asked if they could throw in a calendar and the good guys at brothers said yes and kept there promise thanks guys |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Parts, albeit pricey, for Christmas!!!:metal:
Merry Christmas to Amanda and you, and the doggies!!!:mm: |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
Duty and VAT and the £11 UPS handling charge Merry Christmas and a happy new year to you and your family |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
:chevy:
Quote:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Merry Christmas Martin... its great what you do for your friend Russell.
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
Merry Christmas to you and your family . We both are looking forward to coming over that we are going out on Boxing Day to try and book our flight tickets |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
When we were there, it became apparent again, just how badly we all need to be needed. Russell lives alone, often seeing nobody for weeks on end. While we were there, he spoke about Nip Nip who was his house rabbit that died recently, he was ripped up about it, and then one realises, he was a responsible person before, having had a family etc, they have all left him, and all he had responsibility for, making him feel worthwhile, was this rabbit......... Martin mentioned to me after I said I would make the adapters that Russell was shocked that we were prepared to do stuff for him, without dipping into his funds. People need to care more, in more tangible ways. Right....... I am off to go buy some travel to get to Clem's party with my buddy. |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Awesome...:metal::metal::metal:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Well I've made a start fitting the floor and inner rocker section .
First I cut out the rotten section [IMG]http://i56.photobucket.com/albums/g198/mx5martin/chevy%20c10/imagejpg6_zps8a689927.jpg[/IMG All the rust removed http://i56.photobucket.com/albums/g1...psd7d3fb86.jpg http://i56.photobucket.com/albums/g1...psb2fb3a1c.jpg Trying the panel in place http://i56.photobucket.com/albums/g1...psae66d1c9.jpg After trying it in place I will then remove it . Then clean up the surrounding area . I will then Tac it in place before then turning the cab back over trying the rocker panel and hang the door before welding it all up But before I can do that I am going over to Rian's place today to give him a hand . I will also be taking over the door to repair the small damage on it caused by someone trying about three mirrors on it over the years |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Well as I said earlier I was going to Rian's place this afternoon . The plan was to help him fit his lights and then do my door . After welding up all the holes that had been drilled for the mirrors
http://i56.photobucket.com/albums/g1...psc91a74af.jpg http://i56.photobucket.com/albums/g1...ps3f129096.jpg http://i56.photobucket.com/albums/g1...psed9f4725.jpg After welding the mirror holes the next job was to repair a rusty section at the bottom corner . First was to cut out the rot then make up a plate to weld in http://i56.photobucket.com/albums/g1...ps40843d78.jpg http://i56.photobucket.com/albums/g1...ps94cfadd0.jpg After cutting out the rust on the outer skin I found a small amount on the inner skin so Rian cut out another piece of metal from my old front fender . He then shaped it to match http://i56.photobucket.com/albums/g1...ps2dfba620.jpg http://i56.photobucket.com/albums/g1...ps2d6f192d.jpg So the two plates were welded in to the door http://i56.photobucket.com/albums/g1...psd0389ab7.jpg http://i56.photobucket.com/albums/g1...ps7197f1fe.jpg So once again we worked as a team. I got my door done and Rian got his lights up. This included an outside lamp that I got from my mums installed with a pir detector to light up the path |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Teamwork!!! :metal::metal::metal:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Well on Sunday while working at Rian's house We discussed the fact that it was very cold in my carport . So on the Monday I collected some second hand gates localy ready to fit them on Tuesday .
Tuesday morning I got a message from Rian to ask what I was doing and did I need a hand He had to go and collect his cutouts from Tonbridge which means passing my house to get there . This was the temperature in the morning on the way http://i56.photobucket.com/albums/g1...ps5427a7aa.jpg This picture shows the original wrought iron gates with no protection from the elements http://i56.photobucket.com/albums/g1...ps89f26703.jpg The first thing we needed to do was to replace the damaged kick board .After a discussion we decided to increase the height of the gates by increasing the size of the kick boards After increasing the height we Hung the gates http://i56.photobucket.com/albums/g1...ps38bc41ba.jpg http://i56.photobucket.com/albums/g1...ps15f8f483.jpg Note the tarpaulin to keep the weather out before the gates were fitted The following day while Rian was stripping his truck .I finnished the gates off and fitted a roof from the carport to above the gates . Then painted them all that's left to do is fit some door furniture . I can now get on with the truck in warmer conditions The finished gates http://i56.photobucket.com/albums/g1...ps98b4e0b8.jpg |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Nice work guys! I would hate to say what my wood gates would look like. :rolleyes:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
As always, we all have different skills, so it is fortunate to find someone who can fill the gaps, but sometimes it is just a matter of giving it a go, trying, and then surprising yourself when you succeed. |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
BONDO/BOG/FILLER/PLOD is the friend of every good body worker ehhh??
Took the door parts off today, including the door panels..... first surprise was not being able to unscrew one of the screws on the drivers side, followed by another 5 on the passenger side. Lubricated them, not progress, then went and had a coffee with Martin when he pitched, after which he tried various bodyshop techniques, followed by me and Mr Drill, so I have a repair job ahead before I can get the panels back on. Inside the door was surprise number one, indicating that a lot more pain awaits me...... Can you tell what it is yet? http://i294.photobucket.com/albums/m...ps6f709c2a.jpg Ohhh, and the red you see in the pic, is high density foam flooring, or a camping mat that some clever idiot glued a bunch of inside the doorskin as sound deadening..... So then between Martin and I we continued to laugh, curse and be amazed at all the cockups as we unbolted bits, with bolts missing from the tailgate, some cross threaded bolts etc.... After we had undone a zillion nuts and bolts Martin made me remove the first fender, just to torture me. http://i294.photobucket.com/albums/m...pse92bc7b6.jpg While I was at the second fender, Martin was grunting, groaning and sounding like a walrus mating on a rocky beach..... "Where's your bloody rattle gun?" he grunted from below my feet, under the fender. The bottom fender bolt was not letting up, a bit like some of the others we had already encountered. Fetched the rattle gun and got on with what I was doing, heard ZZZZZRRT..!! Had Martin's head pop up, kinda like a ground hog.... Burger me !!! This thing works well. Note the offending items deterioration. http://i294.photobucket.com/albums/m...ps3a223d0a.jpg Martin is upgrading the rear of his truck with park/indicator lights so made up a template using pencil, masking tape, which is then transferred to cardboard so he can mark out the rear of his truck before cutting the steel to fit the new lights. http://i294.photobucket.com/albums/m...ps9dfc208f.jpg SURPRISE !!! http://i294.photobucket.com/albums/m...ps26f4b074.jpg We also removed the load body bolts, and I undid the fuel filler and overflow pipe Jubilee clips in preparation to remove the whole thing one my trolley comes back from under Martins engine and gearbox. We called it a day quite early as we both had more stuff to do that had nothing to do with trucks. End of a great day. Now the work starts. http://i294.photobucket.com/albums/m...ps2ec2578b.jpg Thanks for the help mate. |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Templates, templates...:mm:
Cheers mate!!! :metal: |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Well it's back to work after 12 days off . I didn't get as much done on the truck as I would have liked but with the carport finished at least I have somewhere warmer and dryer .
I also spent some time over Rian's helping him strip his truck and getting my door repaired so I guess the time wasn't wasted. I did manage to get myself a sheet metal bender for making all the repair panels I need . I also did some running around to find the best deal for our trip in October. Here's a picture of the sheet metal bender http://i56.photobucket.com/albums/g1...ps153c1ce1.jpg |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Waiting the upcoming updates, especially since Rian is assisting today!!!:mm:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
Been a long day, less done than planned, but I know that if this was the USA you guys would have walked away a long time ago and got a new cab...... Of course we cannot do that. Still, I wish I had some lottery cash to get him a new cab to fit to his truck. |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Well today Rian came over to give me a hand on my cab . That or to hold the tissues when i started crying because of the state of it .
This is the state of the cab its clearly rotten as the pictures show http://i56.photobucket.com/albums/g1...ps6a3d57f4.jpg While Rian cleaned up the side section I used the electric nibbler I had been given by George the retired panel beater that used to work with me . I think Rian was impressed with what light work it made of cutting the repair plates out http://i56.photobucket.com/albums/g1...psf88e644c.jpg http://i56.photobucket.com/albums/g1...ps738cf882.jpg Once the plate was cut it was tried for size http://i56.photobucket.com/albums/g1...psddde4b8e.jpg http://i56.photobucket.com/albums/g1...ps3744194c.jpg Next was to clean up the inside for the side repair section http://i56.photobucket.com/albums/g1...ps8b64981c.jpg Then the top section had to be cut out as welding in a repair section was clearly going to be easier to do with the bottom section missing http://i56.photobucket.com/albums/g1...psc3584400.jpg http://i56.photobucket.com/albums/g1...psfc18bfef.jpg http://i56.photobucket.com/albums/g1...psc9acb272.jpg http://i56.photobucket.com/albums/g1...ps8c00166b.jpg Once the top repair section had been welded in. It was time to cut out and make a repair section for the top http://i56.photobucket.com/albums/g1...ps8151fe7d.jpg http://i56.photobucket.com/albums/g1...ps58a9a855.jpg That's it for today I would like to thank Rian for his help. He also took the the last template home with him to do the bend on the edge during the week |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Here's the pictures of the side piece that my photographer forgot to take (Rian) so it was taken later sorry about the quality but it was dark by then
http://i56.photobucket.com/albums/g1...ps96902892.jpg http://i56.photobucket.com/albums/g1...psb32393a5.jpg |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
Sorry, I forgot to grab a pic of the side panel. It seems I have discovered my forté, making and shaping panels As punishment for not taking that photo, I have to try replicate the piece I brought home, from a section of the original bonnet. Unfortunately the truck cab looks like a piece of fine Belgian lace. |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Nice work guys. You are right, lots of times we just grab something new on our side of the pond. Of course some of us are very cheap/poor, so we do the fabricationof parts too. I am no where near the quality you guys come out with though!
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Teamwork...:metal:
Tools...:metal: Great Friends… Priceless!!! :mm: How was the weather inside the work area today??? |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Wow Martin your cab is rotten. Oh well you are on your way to having it all new again. Will look great when you are done.
|
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
it will get there in the end, if only you could post me a cab over |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Nice progress so far and in this crappy weather we are having. Do you have a a date when you want it back on the road or just rolling along to get it to a certain standard?
PS Grizz told me to tell you you should have bought this...............................which is now sat on my drive:lol: http://i216.photobucket.com/albums/c...ps6531efdb.jpg |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
As for your truck I did look at it when it was on eBay and spoke to Grizz about it . In hindsight it may have been a good idea . Though I had already purchased all my new parts for the 65 and being that yours was a 63 I decided against it . I can't wait for you to start a build thread the Lexus V8 sounds a good idea |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
yeah I was only joking Grizz put me upto it:lol: Best to concentrate on just the one if you can, I cant that's why I have 4 cars on the go:lol:
I'll start a thread in the next few days, |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Quote:
He needs to be tortured at all times. :mm::mm::mm::mm::mm::mm: |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Came home tonight and thought I would give making the next panel for mate Martin's truck a go.
My piece of railway line that Woodsie got me years ago, again came in really handy. Can you say ANVIL ?? So using the sharp top curved edge, I started to bend the edge over. Of course putting a curve at 90' to an existing flat surface, meant the plate started curling up like the "Fortune telling fish" you get in Christmas crackers. So I took the hacksaw and cut slits in the edge of the curve, managing to complete the fold over. http://i294.photobucket.com/albums/m...psb7f93862.jpg Then drilled in the mounting hole for the fender in the plate. Using the step drills Ta2Don sent me last year. Amazing tools they are. http://i294.photobucket.com/albums/m...psd0646a11.jpg Next up I cut the lip back by about 8mm to get it to loser to the size needed on the truck. Then I welded all the cuts back together........ Using my mobile to get one of the best ever action pics in my opinion. http://i294.photobucket.com/albums/m...ps783eb47a.jpg Then into the woodwork shed, to use my linisher to work it back to smooth and flat, flush. http://i294.photobucket.com/albums/m...ps77da85f8.jpg Finished product, ready to be welded back into the fire wall. http://i294.photobucket.com/albums/m...psa9a9afd0.jpg Even if I say so, I am starting to enjoy this thing. |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
What can I say you are waisted as a drug dealer (sorry pharmaceutical rep ). While you were making the repair panel I myself was busy in my garage welding the lower door pillar end on
Once again I have to say thanks to Grizz. After cutting the end off I cleaned it up and welded on the new panel . At last things are going back on now and not coming off . Well at least till I start the other side . http://i56.photobucket.com/albums/g1...ps9c46452d.jpg |
Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND"
Being my Birthday today, Nicola my sensible, sensitive caring ..... you get the picture, wife actually gave me the day off to do whatever I wanted, including "Garage time " should I want it.
You may remember that she had bought me the 3" Cutout Valves over the Christmas season for my birthday, so today she gave me a lovely card, and another book on traveling the USA plus she is taking me out as a surprise later. I have rotated the photos on my iPhone before sending them to the iPad to upload to Photobucket, and it seems to work, let's see if they suddenly revert to upside down in a week or whatever, I really have no idea why it is flipping photos upside down. http://i294.photobucket.com/albums/m...pse1544be2.jpg Mate Martin had bought himself a new oil cooler for the auto trans, then found an even sexier one last year, so when I offered to buy it from him, he wrapped it in some old newspaper and gave it to me for my birthday. Thanks Mate, way too much and too big, but the truck thanks you. http://i294.photobucket.com/albums/m...pscd917f18.jpg As Nicola had given me the day off, and my £500.00 travel vouchers were delivered on Friday, I decided that we needed to pop in to Thomas Cook Travel and get the tickets bought today, which would anchor the road trip for October's trip to Clem's Party in Fayetteville, Arkansas. I asked a lady to take the photo for me, and her reply was "This is a bit freaky" Hey, I don't care. http://i294.photobucket.com/albums/m...ps1d4d8adf.jpg After the flights were sorted, we went down to Deptford in South East London to buy my white for the two tone the truck will be getting on its roof and the side flash. Martin also needed some paint mixed up for his Eddie Lawson Replica Kawazaki, so the trip kinda did a load of jobs in one. |
All times are GMT -4. The time now is 04:10 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com