Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 2
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 3
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Nice job on the dash vent holes, it's so nerve racking some people just replace the whole dash. It's a lot of work to do it that way.
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Very nice build...thanks for the inspiration!
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Looks like your nerves held out fine. Good work on the vents.
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Quote:
Quote:
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Just went through entire thread. Very impressive. I am subscribed
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Looks good. Gotta love the air dashes
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Quote:
Quote:
I dropped off the cab and most of my sheet metal to my painters shop yesterday. I am hoping to get it back in 6-8 weeks. |
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 2
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 3
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
This weekend I prepped the last bit of sheet metal for my painter. :metal:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 2
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
I switched my paint choice to GM "Torch Red" after this Corvette instead of Chryslers " Viper Red".
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Congrats on getting it to the body shop. Awesome color choice, can't wait to see it painted.
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
man! you are getting progress done!
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Quote:
Quote:
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Sand-blasted more parts today for paint and PC.
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
looking good
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Looking good same color I'm going to paint mine on that aftermarket clip was the fit that bad? Keep us posted with updates
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Quote:
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Any updates from the paint shop yet?
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Yeah I need to see some Red to drool over :lol:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Quote:
I purchased a stainless steel hardware kit for the body, but I am keeping all of the original hardware and sandblasting them. The original bolts are so nice with the pressed on washers. My stainless kit doesn't have the pressed on washers. So I am 50/50 on which ones I am going to use. Question? Are the original bolts the same color as the body or black? Would you guys paint or powder coat the bolts red (same as the body) or black? |
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Hey Mark,
It sounds like your painter is making great progress. Sounds like you will be red before I am (I have all my panels blocked out and am ready for wet sand too). But I am slow as cold molasses. Looking forward to update pictures. Quote:
I ended up re-blasting the heads and washers from the top (the bluing caused light rust to form). I think it's a low strength acid. Then I epoxy primered and painted them with Hot rod black paint. I am going to paint the hinge bolts when I start shooting the inside panels and my inside cab. I know the heads may get a little wear when I reassemble everything but I will deal with that when the time comes. As far as the stainless bolts go. I wouldn't recommend them on high strength applications like the doors and hinges. I'm sure they would be strong enough but those fine threads and stainless, that might be asking for a stripped and gawled bolt. I used all stainless carriage bolts on my bed and stainless button heads on the bed header panel. They look good and many of them will be exposed to the elements. Good luck |
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Quote:
I picked up my cab, doors, grill, front fenders, tailgate and bed fenders yesterday from my painter. I am so pleased how everything came out! I need to buff out the doors and front fenders still, but here are a few pics. |
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 2
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
I love how the Red looks almost Orange in the sunlight.
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 4
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 5.
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Pic 6
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Looking good!
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
pic
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
looks fantastic!!!
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
1 Attachment(s)
Quote:
|
Re: Started my first frame off - 72 SWB LS1, 6-spd manual
Wow that looks awesome :metal: you went with Torch Red right? Did your painter use a gray sealer or white?
|
All times are GMT -4. The time now is 11:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com