Re: 1965 C20 fleet side longbed DD low budget build.
 

DanG. I remebwr him telling me about it last year. Hah. Super neet guy. Did you have your wagon there? I think I saw it when I was walking around. U were parked under the large oaks in the middle I believe. Great to meet you also hope to see u around more. I'll make sure to bug you with getting that k10 on the road again.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Trust me...he will hunt you down :lol:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Joe, talking with you and Matt really got me motivated to get it back on the road. I have a lot of irons in the fire, but I have to start sometime. Now is as good as any........... Great meeting you.
Greg

Re: 1965 C20 fleet side longbed DD low budget build.
 

What's that supposed to mean joe. huh?

Re: 1965 C20 fleet side longbed DD low budget build.
 

That was a lot of fun....You will have to grab Matt and come on by for a visit.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Hey, just rattling your cage :devil:

Re: 1965 C20 fleet side longbed DD low budget build.
 

no problem greg. Glad I met ya. Good talking with someone who understood my frustrations with this truck. And glad to hear joe and I got u worked up enough to start the k10 again. I'm sure if you just got it to fire its amazing how much and old v8 with an overly rich mixture of fuel can motivate yA

Re: 1965 C20 fleet side longbed DD low budget build.
 

You ain't the only oNE haha (nervously looks around for girlfriend):pty:

Re: 1965 C20 fleet side longbed DD low budget build.
 

I swear by my old man's future grave that my timing mark was 30 degrees advanced hahah turn her back a bit and the throttle Down then took it to the parts store to show off my shiny new toy. Haha ran much much better. so looks like it's all just little things to do until somthing big brakes.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Nice to find a thread from somebody local.
Just started my 65 Long bed project.
Tractor paint rules!
My shop is down the hill from the house so this one will be a driveway project.
I hope the bride doesn't poison me before I get it going.
Its a 327/turbo 350 and I've got in running great.(needs a smaller carb)
Even the lights work!
Next is some lo-buck lowering, exhaust (the current glass packs are mounted directly under the frame rails????) and wheels/tires.
Probably go with truck ralleys I have or chrome smoothies I can buy cheap.
I'll be looking for your C10s at Freds car guys lunch.
W

Re: 1965 C20 fleet side longbed DD low budget build.
 

Glad to see your local as well. Your just south west of me a Bit Maybe I'll run into ya. Got any pictures of your rig?

Re: 1965 C20 fleet side longbed DD low budget build.
 

Haven't done the lunch at Fred's...but there's the Joker's meet next Thursday 14th that I'll try to attend...Fred has a sign up list if your interested.

Re: 1965 C20 fleet side longbed DD low budget build.
 

HAHA!!!!!!! All the girls RUN from mine! :lol: Well...except a couple. :D

Re: 1965 C20 fleet side longbed DD low budget build.
 

Amen. Haha its the ones that run TO the truck you want to keep ;D

Re: 1965 C20 fleet side longbed DD low budget build.
 

Thanks for the info

Re: 1965 C20 fleet side longbed DD low budget build.
 

put a new steering stabilizer back on the truck to replace the old One.. haven't driven it yet with it on. But it looks like I need to do my front wiper seals On the axle.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Ah, little leak ain't gonna hurt....makes slick burnouts easier. :lol:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Front wheel drive burnouts? Haha

Re: 1965 C20 fleet side longbed DD low budget build.
 

4X4 burnouts. :metal: :lol:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Maybe with 76stepside01's 75mm turbo it'll do a full on 4x4 burnout. chain The darn thing to a tree and let that motor scream.:metal::metal:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Got my apache 20 badges in from another forum member hot rod 66 today.Thanks man. they will look right at home on my apache hood.:chevy:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Oops forgot pictures.

Re: 1965 C20 fleet side longbed DD low budget build.
 

I was gonna say....:wop: But never mind! :lol: Nice badges! :chevy:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Haha know what u meen tj. Sure does stink when there's a thread thats 30 pages long and sounds super awesome and there no pictures. T_T. I think this week I'm going to restore them. Re finish the chrome and re painted t that red strip Below. How's your stepside comIng along? I say some single stage black In a can On your build, guess That's what your thinking for finished color?

Re: 1965 C20 fleet side longbed DD low budget build.
 

Two Tone is coming along. lol Slowly but surely. I'm painting the frame single stage black and the body will be blue and silver. :chevy:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Started disassembling the front driveshaft. Nice couple of dents in that tubing ehh. :lol: Got the knuckles off and found some material for the center section. Going to weld it all up later this week. Also found some more hub caps my drink found em for 20 bucks. Have the matching front caps from a 4x4 just need to cut out a little more from the center of them. My locking hubs are slightly to big.

Re: 1965 C20 fleet side longbed DD low budget build.
 

With a front shaft that short you can easily to front wheel burnouts! :lol:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Hah. That's about the lengths of my uncles cj5s rear driveshaft haha. He's got a sm420. T221 and a gear vendor In the thIng. Hah. Fun to drive tho.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Im proud to see that you are putting the cut outs to good use. I have a flowmaster #942451 that is in excellent shape. I was going to use it, but I changed my mind. Ill let you have it for $20 if your interested. its a delta flow 50 series. 2.25" offset IN, Center OUT.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Those cut outs sound nice. I'm looking for dual mufflers unfortunately thanks tho. Plus I have 21-23 inches of room to play with the mufflers. They have to narrow like a glass pack so that they don't hang below the frame. I hate seeing exhaust pipe hanging low.

Re: 1965 C20 fleet side longbed DD low budget build.
 

I almost went to the car show at the stoke ranch. let me know next time you go out. I hear buns & burgers has the shows on fridays.. you go to those? lets meet up.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Dang you guys have all the fun down there. :lol: I have to wait until July for the Fabulous 50's show. lol Anyone wanna come? :chevy:

Re: 1965 C20 fleet side longbed DD low budget build.
 

Iv gone in the past but yeah man we should hit em up. We would be the biggest damn things there haha but doesn't bother me none. The show at stokes ranch was a good turnout. 300 somthing cars some really really cool cars. My tag when I rolled in was 284 or Somthing.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Tj. If my truck would go faster than 55 I would try and make it up to ya. I think until I re gear the truck she's staying in the state. :/ one of these days I want to bring her out to the big horn mountains up In Sheridan county Wyoming. Iv got a list of places I want to take the truck. After new gears. Cross over steering front disc conversion And a Real radio. That's more important hahah got to have some good tunes

Re: 1965 C20 fleet side longbed DD low budget build.
 

Fit up my front driveshaft to the knuckles and ran two passes on. Em with the tig. Got a nice hot root pass and then did an easy weave pass over the first one. I know the knuckles are Ment to go inside the material but it's all I had to work with and I'm sure it's fine until I make a new one using a tractor slip sleeve and new knuckles. Also just purchased my 84 cubic feet argon cylinder for my tig setup at home. :) that should bring in some more Mulla.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Okay. So can anyone explain this. 1965 c20 sm420 drove fine but had a broken top. Where the shifters going In. Shifted ...but it was sloppy. OK now Here's where it's tricky. 1965 K20 sm420. Both tops of transmissions had same part numbers same throw. Just in better condition. Put the good lid on the c20 sm420 and the thing won't stay in second. Accelerating. Decelerating. Anything. And 4th gear wined like crazy. Horrible to drive. Just put the old top back on that the c20 trans came with. And boom shifts perfect. I get why it's shifting fine now. But why wouldn't it take the k20 top. Only thing I imagined is that it had a different wear pattern or the shift fork was bent because 4x4 are usually driven harder. Any thoughts? And I think it looks a little like an nv4500... it's my fake nv4500/sm420. :lol: but now she's a runner And fun to drive again. Also my front drivers side brake is not Working. Need to look into that next. Till then I just backed the adjuster all the way out.

Re: 1965 C20 fleet side longbed DD low budget build.
 

I believe there may have been a difference. lol Talk about whine...haha...drive my ol GMC...I ought show you all the skill it takes to drive that thing. :lol:

Re: 1965 C20 fleet side longbed DD low budget build.
 

You ought to drive my 65 hahah that old 4x4 really let's u know it's running straight cut gears. Got 2 big old gear boxes sitting below me.

Re: 1965 C20 fleet side longbed DD low budget build.
 

Matt-glad you got it shifting again. does it still wine in 4th? some changes were made in 64-67 so a little different than mine being a 61, and mine doesn't have the 2 ribs as yours. just need to get mine out and re-bearing it.

Re: 1965 C20 fleet side longbed DD low budget build.
 

4th whines a tiny bit. But I was driving it like how the picture looked. No cover nothing. So after the cover and the insulated floor mat I'm sure I wouldn't have ever noticed it. Plus the straight pipes make anything hard to hear. Even your own thoughts. Hey looks like I'm going to be up around your area again this weekend think you'll be around to swing by to say hey?