Re: Brave or crazy? crewcab build
2 Attachment(s)
Got some more work done today I worked on the rocker for the 4th door.
I used two new rockers to make one.I also worked on the back side of the b pillar I used the rear of the pass side b pillar off another sub. I flipped it upside down to fit also worked on upper door channel I used the same method on this area. Everthing is roughed in I wanted to get more done but it got late and I ran out of argon. |
Re: Brave or crazy? crewcab build
Lookin good though!!!
|
Re: Brave or crazy? crewcab build
Man I have been keeping a eye on your build. Man luv what your doing. Great ideas and like the fourth door. Subscribed!!!!!
Posted via Mobile Device |
Re: Brave or crazy? crewcab build
Quote:
Quote:
Hopefully I can start work on the door soon |
Re: Brave or crazy? crewcab build
3 Attachment(s)
Time for some door pics, after lots of measuring its time to cut up a super clean rust free arizona door. This door was coated with under coating on the inside so I had to strip some off so it would sit flush.
|
Re: Brave or crazy? crewcab build
2 Attachment(s)
Heres some more pics
|
Re: Brave or crazy? crewcab build
This is the fun part!
Posted via Mobile Device |
Re: Brave or crazy? crewcab build
3 Attachment(s)
more pics
|
Re: Brave or crazy? crewcab build
Oh man you are making it look easy!
|
Re: Brave or crazy? crewcab build
Quote:
|
Re: Brave or crazy? crewcab build
Quote:
|
Re: Brave or crazy? crewcab build
1 Attachment(s)
Quote:
man look at at all those holes I have to fill! |
Re: Brave or crazy? crewcab build
Sweet, Your making great progress. Looks awesome.
|
Re: Brave or crazy? crewcab build
Quote:
Did you roll the front edge of the door skin like it would be from the factory? |
Re: Brave or crazy? crewcab build
Quote:
I think Im just going to double layer it and weld down the seam to look factoryish at least thats the plan. |
Re: Brave or crazy? crewcab build
Quote:
|
Re: Brave or crazy? crewcab build
Duse you have done more in 2 months than I have in 3 years
Posted via Mobile Device |
Re: Brave or crazy? crewcab build
Killing it man !
Posted via Mobile Device |
Re: Brave or crazy? crewcab build
great job!!
|
Re: Brave or crazy? crewcab build
Do you have your hinges attached in that picture?
|
Re: Brave or crazy? crewcab build
Quote:
It was getting late and I just had to check it out before I was done for the day. The door fits in the hole but is nowhere near lining up, still have a little trimming to do and alot of adjusting. |
Re: Brave or crazy? crewcab build
2 Attachment(s)
Ok, I could not wait until the weekend I had to know if this was going to work.
I got home from work drilled a few holes, now I have a swinging 4th door. Still needs alot of work and adjustment but it works and fits pretty good as well. |
Re: Brave or crazy? crewcab build
3 Attachment(s)
few more
|
Re: Brave or crazy? crewcab build
Wow bro! Looks great!
|
Re: Brave or crazy? crewcab build
Did you move the hinges closer together like on the 3rd door?
Posted via Mobile Device |
Re: Brave or crazy? crewcab build
Amazing work!
|
Re: Brave or crazy? crewcab build
Quote:
|
Re: Brave or crazy? crewcab build
Looking awesome !!!!!!!!!!!!!!!:metal:
Posted via Mobile Device |
Re: Brave or crazy? crewcab build
1 Attachment(s)
Quote:
|
Re: Brave or crazy? crewcab build
Impressive work man.
|
Re: Brave or crazy? crewcab build
I think it's time for a video, doors open, doors shut (think of this as being said from that guy on 'Karate Kid', the original one "Wipe wax on ,wipe off." )
Just kiddin, sorta, looks fantastic ! :clap: Bravo. |
Re: Brave or crazy? crewcab build
That is pretty awesome that it worked that way!
I like the way you did your door better than the way I did mine and my brothers. On both of them I used the rear of a right door and then chopped the front of a left door for the hinge section. I thought there was a reason why I moved the hinges closer on my Burb to match the 3rd door, but i guess it was moot. I may just copy you for the hinges on my brothers door, and save me some welding. After I bought my brake, I started to think that it would have been easier to use Suburban stuff and just flip it. But we had a real hard time finding one that we could get parts from. Donor parts are definitely the way to go. |
Re: Brave or crazy? crewcab build
Yea the door was eaiser then I thought it would be I am still going to use part of a passenger door as part of the finishing details. I was planning on moving the upper hinge down but when I mocked it up it looked like it would work so I gave it a shot. I used as much off the doner sub as I could I was just lucky my buddy had one i could cut up. The weather is about to get ugly around here I just hope I can keep up the pace.
|
Re: Brave or crazy? crewcab build
Quote:
It's the fastest method with the best looking results IMO. Build is looking better every day! I wish I was brave/crazy enough to do one. :lol: |
Re: Brave or crazy? crewcab build
Lookin' great!
|
Re: Brave or crazy? crewcab build
you are making this look easy man, nice work !
|
Re: Brave or crazy? crewcab build
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Brave or crazy? crewcab build
your door is turning out awesome. ...keep going man
|
Re: Brave or crazy? crewcab build
subscribed! badass build i lolove the craftsman ship of these crewcab builds
keep up the good work i cant wait to see more |
Re: Brave or crazy? crewcab build
just saw this,awesome work !
|
All times are GMT -4. The time now is 08:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com