Re: What did you do to your truck today?
 

cool :metal:

Re: What did you do to your truck today?
 

Tx Firefighter
You did a perfect job under the hood on that truck man it looks so good!!!
Everything just looks great!:metal:

Re: What did you do to your truck today?
 

Well I put the carb. back on that I recivied back from Quick Fuel Tech. I checked and the previous owner had not even put a fuel filter on it yet,so thats my next thing to do before I fire up the newly rebuilt carb.

Re: What did you do to your truck today?
 

Wet and got a rear end, engine block and some other stuff from Joe. :chevy:

Re: What did you do to your truck today?
 

speaking of joe
quit changing your avatar
your confusing me :confused:
:lol:

Re: What did you do to your truck today?
 

Going to pick up a set of 55-66 stepside fenders tomorrow for 50 bucks:metal:
gotta drive 2.5 hours each way tho.
oh well.

Re: What did you do to your truck today?
 

Fired up the truck. Sounds like a V8. After tha tank and seat install. Carpet,Custom Guage Cluster and Brake job will follow.

Re: What did you do to your truck today?
 

uhhh............moved it took the battery out and put it in the ferd and welded in some O2 sensors

Re: What did you do to your truck today?
 

Started torching/knocking the rivets out of the rear bump-stops, and bought a piece of pipe to make a sturdy c-notch.

Re: What did you do to your truck today?
 

Worked on some more panels on Jon C's big window cab and packaged & shipped some more good, used '60-'66 Chevy truck parts.

Re: What did you do to your truck today?
 

I had about 4 hours to spare before it got dark so I dove into the rear half of the farm truck. I replaced all the rear suspension...refurbished trailing arms with new bushings, 5 lug rearend, ECE lowering springs, etc...

http://i276.photobucket.com/albums/k...rmtruck048.jpg

I'm getting older and this stuff is getting to be hard work.

Re: What did you do to your truck today?
 

Cool! I like the stance of your truck Kevin :metal:

Re: What did you do to your truck today?
 

Thanks Scott. I'm concerned that the rearend will sink too low when I install the bed wood. I like my stuff to have a bit of a rake, about like it sits now. If it goes too low in the rear, I will have to lower the front some more.

I have new wheels in boxes in my shop right now. I should have them installed pretty soon.

Re: What did you do to your truck today?
 

blocked the roof and hood got descoraged so had a beer

Re: What did you do to your truck today?
 

Headed to the shop to weld in some patch panels on Jon C's big back window cab. Hopefully, I can snap some better pictures tonight of our progress...oh, the anticipation!

Re: What did you do to your truck today?
 

I got my new back half ready to bed welded in after I get some weld through primer.

Re: What did you do to your truck today?
 

hey that almost looks like my truck with the rake like that and the ralleys

Re: What did you do to your truck today?
 

I'm sanding on my front fenders trying to get them done and trying to round up some friends to help pull my cab off...Not much luck with that!

Re: What did you do to your truck today?
 

Kevin:

You don't look as mean in the recent photo, as you do in your avatar! Nice work on your rig though. You do in 4 hours, what most guys do in 4 days or 4 weeks.

Re: What did you do to your truck today?
 

Charged the battery. Ordered more parts online. Pretty lame .....

Today the wind is howling and it is snowing again. My thankful thing today is ... A Corona box full of new 2009 Goodguys, Hemmings and street rod magazines made it to my house to read this winter before I pass them around to some one else.
No bad days here.
Happy thankgiving
Attachment 516278

Re: What did you do to your truck today?
 

Went yesterday and got the door renforcement screws and ferles,clips for my 72 GMC doors Dean Johnson at TNCHEV.com has any used part you'll need, He's located just outside Knoxville Tn. I was there anyway and what I pcked up no body has them new.:gmc2::gmc2:

Re: What did you do to your truck today?
 

I had to do a massive powdercoating job today but I did find some time for my own truck.

I cleaned and flushed the tank with muriatic acid and water mix. Then, I prepped the outside for powdercoating. After all of that nasty chemical stuff, I put it in the oven to cook it real dry inside and out. It's actually out there cooking right now at 300 degrees.

I'm waiting for my POR15 gas tank sealer to show up as well as new sending unit and gasket from Classic Parts.

http://i276.photobucket.com/albums/k...rmtruck052.jpg

Re: What did you do to your truck today?
 

Would be nice Bubba to have the Corona box full of cold ones plus another box
full of mags. It don't get any better than that. Happy Holidays!---Vernski:metal:

Re: What did you do to your truck today?
 

I mocked up the seat for my not yet introduced 64 project. A buddy from work did the upholstrey & didn't do bad @ all for a novice (his pops does it for a living & he's trying to get into it as well). The frame & box were powder-coated satin blk; the material is 02/03 Dodge Ram stuff. The seats are just setting on the frame for pics . .....

Re: What did you do to your truck today?
 

Hey that looks good!!

What you mean not introduced :devil: :lol:

Now i want to see some pics ;) :lol:

Re: What did you do to your truck today?
 

Nice seats

Re: What did you do to your truck today?
 

You're telling me! He started w/this . . .....

Re: What did you do to your truck today?
 

A little more progress on Jon C's big back window cab. Should be done by Monday night. If I could get my POS Sprint wireless card to maintain its connection, I would upload several more pictures. Note to self, do not buy anymore Sprint products.

Re: What did you do to your truck today?
 

Pulled the front brakes including backing plates to rebuild with new shoes, flex hoses, bearings, wheel cylinders and turned drums. Cleaned it all up to get ready to paint and reassemble.

Re: What did you do to your truck today?
 

Was on-line all day looking for a flow control valve spring for my power steering pump!!

Re: What did you do to your truck today?
 

I don't have one of them, but you might check your local auto parts store or www.truckandcarshop.com

Re: What did you do to your truck today?
 

I am still working on my to-do list, figuring out what I am going to do and in what order. In the past couple weeks I have:

Gotten it legal,

Unpacked the spare parts the PO sent with the truck (some good stuff in there!)

Filled it up, and overflowed the tank (lesson learned on that one :lol: )

Ordered a 96X72 bed mat (the bed is already redone and I want to be able to use it as a truck sometimes)

Connected a second set of speakers that were in the boxes, then bought Kenwood and Pioneer Speakers off ebay to replace the ones in it now (It already has an aftermarket Pioneer sterio).

Took it to the car wash.

Bought an 80 gallon air compressor (still working on where exactly and how to install it as to least disrupt the house and neighbors.)

I won a new glove box door assembly on ebay today ( sorry if I was bidding against any of you).

Nothing picture worthy yet.

Re: What did you do to your truck today?
 

Pulled off my square body fenders off of my stepside bed and figured out that my 55-66 fenders come no where close to lining up with the factory holes. Oh well minor set back. I will make a template and drill some new holes. After that I will get a 1'' strip of sheet metal and widen each fender 1''.

Re: What did you do to your truck today?
 

Finished Jon C's big back window cab this evening. We will load it up tomorrow and be on the way to AL.

Re: What did you do to your truck today?
 

I'm still working on my gas tank. I figured out where it had been seeping on the bottom. So, I brazed it up. After that I powdercoated it in silver vein with clear. It's in the oven curing right now while I type this.

http://i276.photobucket.com/albums/k...rmtruck054.jpg
http://i276.photobucket.com/albums/k...rmtruck056.jpg
http://i276.photobucket.com/albums/k...rmtruck058.jpg

POR15 is giving me the beat down on my can of tank sealer. I ordered a bunch of different stuff Friday. All of it is delivered by today except the POR15. That's due to be delivered Monday. That's going to slow my progress down a good bit.

Still pushing like hell to get this thing on the road in the next few weeks. I want to take mama to get her Christmas tree in it.

Re: What did you do to your truck today?
 

Now that's cool. Please follow-up & let me know if you're not happy w/the motor once it's up & running.

Re: What did you do to your truck today?
 

finally got the paint pretty much done on the dash of my truck now i need to put everything back together.

http://i70.photobucket.com/albums/i9...2/IMG_4197.jpg

http://i70.photobucket.com/albums/i9...2/IMG_4198.jpg

http://i70.photobucket.com/albums/i9...2/IMG_4199.jpg

http://i70.photobucket.com/albums/i9...2/IMG_4196.jpg
:metal:

oh yea i also got the material for my seat. i think it matches pretty good. as soon as i get the windshield back in i can start the seat.


http://i70.photobucket.com/albums/i9...2/IMG_4203.jpg

http://i70.photobucket.com/albums/i9...2/IMG_4204.jpg

Re: What did you do to your truck today?
 

the seats will pretty much match. I'm waiting to see your truck together. Are you using any other colors to break up all the orange?

Re: What did you do to your truck today?
 

yeah the truck is all white. only the dash,roof and striping are that color. the seat will be white with copper pleated inserts.

Re: What did you do to your truck today?
 

man thats a lot of metalflake
so how much are you paying for the sunburst orange