Re: 1962 chevy c10 update.
 

That lower bolt hole tab is going to get cut off flush with the rest of the tail housing on my S-10 tail housing when I go to re-install mine into my 62.

It doesn't serve any purpose on our trucks, doesn't add any structural strength to the housing and just serves to get caught on the cross member when installing or removing.

I told myself when I yanked it all outta my truck (getting hung up numerous times in the process) that bugger was coming off before the tranny/engine combo goes back in!

Re: 1962 chevy c10 update.
 

The make is CCP and this kit is for the 60-62 manual transmission. No fitment problems at all. The only problem with the kit was it doesn't come with instructions. So be ready to cuss a little on where things go. The front brakes clear the wheels with no problems.

Re: 1962 chevy c10 update.
 

It’s been a while since I posted on this build. I have been working on a 57 truck that I sold in September, so now I’m back on the 62. I’m getting ready to start a big update on the truck. I’m planning on doing a V8 swap, front suspension swap, rear axle swap and A/C install. I already started putting the engine together. I have a 355 with a 480 lift cam going in the truck. The 235 runs great but I’m really wanting some power under the hood. Stand by for some updates.

Re: 1962 chevy c10 update.
 

Whoa. You're not kiddin around. Aluminum heads and all! I never saw your thread back in the day so I just read through it. I like how you've phased it. You made a plan, executed it, enjoyed the truck. Then did phase 2 when the time was right, etc. Great truck! I'm in to watch the updates. Also cool how your wife is part of the "truck team".

Re: 1962 chevy c10 update.
 

I’m doing all the things I didn’t do when I first built the truck. I sold my 57 that I was working on for 5 years. It was full custom with a LS. This truck was just setting with little driving time. After doing all the work on the 57 I now see flaws in this build. Lucky it’s painted so I won’t be doing any exterior body mods. Now I have time to do some upgrades to the truck. Drivetrain, AC wheels. I won’t be in a big hurry. I will have the engine, 12 bolt rear axle and suspension prepped before I actually install it. As they say they are never done.

Re: 1962 chevy c10 update.
 

Found a 78 C10 front suspension on line for a good price. Tomorrow I will start tearing it down and get it ready for paint and reassembly. Any advice is welcome on the 60-62 front suspension swap that would make it easier.

Re: 1962 chevy c10 update.
 

I have a drilling jig template that references the factory holes and moves the front crossmember forward 1"

Print This Full Size

Re: 1962 chevy c10 update.
 

Skinnyg what is the reason for moving the crosmember???

Re: 1962 chevy c10 update.
 

It centers the wheel in the wheel opening better.

Re: 1962 chevy c10 update.
 

Thanks for the response. I was thinking of doing that but I’ll still be running my t5 trans and it will still be mounted to trans mount. I guess I could re adjust everything.

Re: 1962 chevy c10 update.
 

If you don't want to mess with the engine and transmission mounts, you can do the caster mod which will help center the wheel a bit more and provide better suspension geometry.

Re: 1962 chevy c10 update.
 

Skinnyg i guees if you move the crossmember forward i will have to move steering box ahead 1 inch also

Re: 1962 chevy c10 update.
 

I don't think people usually move the steering box or idler arm forward, but check other builds. I would only move those if the steering linkage is hitting the crossmember after the move.

The control arm caster mod is pretty easy, and WELL worth it (did it to my '77 and my '61).

Re: 1962 chevy c10 update.
 

Can you send me the template?

Re: 1962 chevy c10 update.
 

Click on the link I gave you to the pdf of it. You quoted it just now.

It's from this page of my build:

https://www.gwellwood.com/project-ca...apache-part-2/

Re: 1962 chevy c10 update.
 

Thanks for the help!

Re: 1962 chevy c10 update.
 

Made a little more progress on the engine build during the cold weather. I ordered a set of finned rocker covers from Amazon and added some engine paint. Really makes the engine pop! Just have to decide on a drive system and what I’m going to use for fuel delivery.

Re: 1962 chevy c10 update.
 

Your mail was full. I run Hookers HK- 2466 but they don't clear clutch fork. This is why I run a hydraulic bearing on the clutch