Re: How about some pics of Static dropped 60-66
Nice truck LDO!
|
Re: How about some pics of Static dropped 60-66
Thanks everyone. Gotta re do the front suspension and it has been a pain figuring what parts to use but this forum and its members have been a big help.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Very Nice :metal:
|
Re: How about some pics of Static dropped 60-66
2 Attachment(s)
My 1965 C10 static dropped. 2 coils off the front. 4" blocks and 1 coil off the rear. About to be bagged in a couple of months. Stuff is in the mail.
|
Re: How about some pics of Static dropped 60-66
That looks nice pelt! What size tire you running?
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Thanks, I'm running p235/75r15. My buddy jusspassnthru is running a smaller tire and it looks lower but I like the bigger tire.
|
Re: How about some pics of Static dropped 60-66
I've also added the custom cab trim piece and dog dish poverty caps since this was taken. I have a few more pictures in my gallery.
|
Re: How about some pics of Static dropped 60-66
Quote:
what suspension are you running? That sits really nice |
Re: How about some pics of Static dropped 60-66
found my springs not sitting in the front pockets right. they are now..
http://i6.photobucket.com/albums/y23...3C61D555E0.jpg 4-6 drop, parts from Scott Hot Rod Shop. |
Re: How about some pics of Static dropped 60-66
4 in drop Leaf spring and 2 in drop shackle rear, 2.5 spin and 1 inch springs front. Going to a 2 in front spring soon.
http://imageshack.us/a/img96/2604/20130110152107.jpg |
Re: How about some pics of Static dropped 60-66
Hey, I got a 64 GMC w/ rear leafs. I'm kinda new here, where did you get lowered leafs or are the garage built? Or does anyone know of a flip kit for the rear? Any info would be appreciated, thanks.
|
Re: How about some pics of Static dropped 60-66
Quote:
(shackle flip is a 4X4 term) There are drop shackle kits available that are essentially longer shackles for the back of the spring. Drop leaves are also available and between the two you can drop the rear of the frame to the point of needing a "C-notch" on the frame. :banghead: HOWEVER... "C_notching" a leaf sprung frame is HIGHLY inadvisable since the back of the leaf sprung frame is an integral part of the structure of the suspension while a coil sprung frame is not.... :gmc2: Many people don't know that 63-66 GMC were not sold from the factory with coil sprung rear suspension so almost everything available for the 63-66 trucks is for the coil rear suspension. You could swap to a Chevy frame but that is quite a bit of work, but then you would have the coil/trailing arm suspension that tons of stuff is available for. :metal: Hope this helps. :5150: |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
Quote:
I'll have to dig around for a pic I had on the flip kit for the later leaf spring trucks (73-87) cause I think it would be doable to fab something similar for your truck. Seems a flip and losing some leafs with a frame notch will get you down on the back end. I'm doing a 4" coil spring / 2" block drop on my 62 C10 with a notch. 3" coils and 2 1/2" drop spindles on the front. I have to wonder when it becomes necessary to raise the bed floors & tubs within the fleetside bed box? keep us posted... FOUND the pic bob |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
All cleaned up!
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Beautiful truck Steve. What tire size and drop?
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Coker 235/70/15, cragar 15x8, cpp 3 inch front drop springs, 5 inch rear. Just got the cpp disc upgrade and drop spindles, probably going to throw a 1" or 2" block out back.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Thanks, I have the same CPP kit and will buy the spindles soon also. I look forward to seeing yours done. Great tire size.
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Quote:
Check with CaptainFab on this forum. He has supplied several special suspension and steering pieces to friends of mine and everything was top notch quality. If this is what all of you kids are calling a flip kit.. captainfab can probably help you out. :5150: |
Re: How about some pics of Static dropped 60-66
Quote:
THat's what I was thinking about when I asked about a flip kit, to flip the axle above the leaf springs. I've seen them for late model trucks just not earlier trucks. I'll look up CaptainFab and check him out. Chopboogie |
Re: How about some pics of Static dropped 60-66
Quote:
I'll look at this option, I'm comfortable with some minor fab work, body work scares me. It will be a couple months before I have anything to post. I hope to get started then when the weather breaks a little. I got a 4 month old plus 2 other kids, trying to keep them and mama happy leaves just a little time to play in the shop. Chopboogie |
Re: How about some pics of Static dropped 60-66
Quote:
http://67-72chevytrucks.com/vboard/member.php?u=30278 Since your frame is a leaf, don't get talked into notching it... that will really weaken the leaf frame... You can get her pretty low without doing a C-notch. :5150: |
Re: How about some pics of Static dropped 60-66
cb... I hear you and speaking as an old-f@rt, dad, and Grandad, they are all that really matters, but in the balance of things you will get there and these shouldn't be hard or expensive to fab even if nobody is making them.
Tube diameter, saddle width, and so on... could be cut out on the cheap and the results would be dramatic. I'm also a fan of CaptFab's stuff. keep us posted and hug the family. rg |
Re: How about some pics of Static dropped 60-66
Beautiful truck!! I have a 63 LB and am looking to buy a 4/6 drop and disc brake conversion from Early Classic as well. I was wondering how you liked your kit for them and how the install went? Thanks for any info.
|
Re: How about some pics of Static dropped 60-66
Quote:
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Quote:
http://www.performanceonline.com/che...springs-parts/ They have mono leaf springs and drop shakles for your leaf truck. Hope it helps :5150: |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
Sunday I got the front drop done - it's on the ground finally and it's SOOO nice to have a rolling truck again.
62 C10 - 2 1/2" Bell drop spindles and 3" drop coils on a 78 burb clip. Steering section is next - Then front sway bar. rg |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
This was my 65 shortbed. Built it in 1994/95. Sold it in 97.
350/350 combo 74 control arms with 5 lug disc 72 rear 12 bolt with drums 2.5" Western Chassis spindles with 3" Eibach coils front 5" Eibach coils with 2' blocks in rear Doetch Tech shocks all 4 corners 1 ton swaybar 15x7 and 15x10 Welds with 235/60 and 275/60 BFGs Lip stick red with 93 Silverado bench seat gray Best handling truck Ive ever owned. Sorry for poor quality pic... |
Re: How about some pics of Static dropped 60-66
My 62.... I wished I would have just bagged it.... This mild static drop wasn't sufficient..
http://i1215.photobucket.com/albums/.../Orange037.jpg My 63.... paid the price for my previous wishes. |
Re: How about some pics of Static dropped 60-66
Quote:
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Like*
Posted via Mobile Device |
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
Quote:
http://i670.photobucket.com/albums/v...p/IMG_0290.jpg |
Re: How about some pics of Static dropped 60-66
3 Attachment(s)
My daily, plan on going 1 in lower all around.-Jimmy-:ito:
|
Re: How about some pics of Static dropped 60-66
Nice!
|
Re: How about some pics of Static dropped 60-66
Hi
I have a 1965 C20. I want to lower it ,but am still a novice at this type of stuff. I want to lower it about 4 inches front and back,and want to know can this be done just by changes coils?How will it affect handling?and stance?Please help!!Thanks |
Re: How about some pics of Static dropped 60-66
Quote:
P.S. When you have questions, you will get plently of help and different kinds of advice, but you should post your question in the right place. This is a "picture thread" so some may get a little cranky to see questions, and requests for advice here. Welcome to the forum, feel free to PM me if you like, I would be happy to help you learn your way around here. |
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
66 C-10 Small Rake will be going to wider rear and narrower front wheels and tires. A mild Pro Street look.
|
Re: How about some pics of Static dropped 60-66
Quote:
|
Re: How about some pics of Static dropped 60-66
1 Attachment(s)
|
Re: How about some pics of Static dropped 60-66
Quote:
|
All times are GMT -4. The time now is 06:32 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com