![]() |
Re: Maggie's Custom
Very cool!
|
Re: Maggie's Custom
Quote:
|
Re: Maggie's Custom
5 Attachment(s)
Here is the bed done, all I have to do and tighten all the bolts but I'm thinking of holding off until the exhaust is done. I really am at a stopping point so the next pictures I post should be of the motor in and the truck driving. I am conserding pulling the crossember out and pancaking it for a little more ground clearnce at ride hight, we'll see. Untill than, some pics!
Attachment 993039 Attachment 993040 Attachment 993041 Front bumper on just for looks! Attachment 993042 Attachment 993043 Jason and Maggie |
Re: Maggie's Custom
I dig this truck nice work kat!
|
Re: Maggie's Custom
Like I said, "you work fast". Got me on pins and needles for when you are done driving and start the rebuild. Sweet Ride!
|
Re: Maggie's Custom
Quote:
With the drivetrain out of the way, it's just 14 bolts & a weekends labor (w/a dirty x-member). Last one I did I started on Sat morning & had it tacked up for welding by 6pm Sat night. Prob could of had it welded up by 6pm Sat night but it took hours to clean the road-grime/grease build-up off all surfaces for quality welds. |
Re: Maggie's Custom
I agree, I'm going to make the decision when I get the truck in the new shop. Room, time, weather!
Again, thanks for the comments!! |
Re: Maggie's Custom
Quote:
|
Re: Maggie's Custom
Very, very nice!
Posted via Mobile Device |
Re: Maggie's Custom
Still not working on it! But I'm thinking about it!!! I will be pan caking the front cross member next.
Jason |
Re: Maggie's Custom
Dig it.
|
Re: Maggie's Custom
Quote:
Posted via Mobile Device |
Re: Maggie's Custom
2 Attachment(s)
|
Re: Maggie's Custom
Nice :metal:
Posted via Mobile Device Posted via Mobile Device |
Re: Maggie's Custom
Jason, are you doing Power Tour since it starts in Dallas next June? Would love to see the truck! Nice shop and wish I had one instead of my garage!
|
Re: Maggie's Custom
Duude congrats !!
|
Re: Maggie's Custom
New shop looks at least as good a s a 2 car garage... better maybe? I hope. Hop the new digs work out for you guys:metal:
|
Re: Maggie's Custom
A space to call your own. Nothin better.
|
Re: Maggie's Custom
Awesome!!!!
|
Re: Maggie's Custom
Congrats, again great job on the truck!
|
Re: Maggie's Custom
Coming along nicely
Posted via Mobile Device |
Re: Maggie's Custom
Thanks!! Back on it in the next few months!!!
Jason |
Re: Maggie's Custom
Hopefully ur getting some work done haha... I've barely gotten anything done lately. I check this page daily. Ur def doing a great job and have some really good ideas that I hope u don't mind if I use. you and Coulter have some skills and looking at both of your build threads I have come up with a plan for my truck. I have a ton of questions hopefully u can answer....like.... What size and length bolts are you using on your trailing arms for the drop blocks and rear end. What size length bolts are you using for mounting yor bags. I just got my set of dominator 2600 bags not sure what you r using. Any help would be highly appreciated.
Posted via Mobile Device |
Re: Maggie's Custom
any updates yet??? yall been slackin hahaha
|
Re: Maggie's Custom
5 Attachment(s)
Nothing with the truck, still working on the shop!! Holidays, day light savings, and work have put it at a slow pace!! pics none the less!
Attachment 1038537 Attachment 1038538 Attachment 1038539 Attachment 1038540 Attachment 1038541 Concrete is done, waiting to do the addition to the front!! Jason and Maggie!! Yours is looking good!!! |
Re: Maggie's Custom
nice man your gonna like that shop when u get done!!! its good to see some updates... even though its not the truck!! everyone likes shop pics too!!
and thanx man!! |
Re: Maggie's Custom
very cool looks like a ton of room!
|
Re: Maggie's Custom
Whats the square footage? Looks HUGE!!!
You will Love it! |
Re: Maggie's Custom
Quote:
I'm getting realy close!!! Pics coming soon!!! Than back to the truck!!! She can't wait!! Jason |
Re: Maggie's Custom
4 Attachment(s)
Here's the shop! Finished!! Sorry for the cell pics!
Attachment 1079492 Attachment 1079493 Attachment 1079494 Attachment 1079495 Jason |
Re: Maggie's Custom
3 Attachment(s)
Here's the truck going in!!
Attachment 1079496 Attachment 1079497 Attachment 1079498 This has taken much longer than I wanted, but getting close to being able to work on it again, I've been busy doing side work to pay for all this too!! Hoping to get this thread back to the front with some progress pics soon!! Jason |
Re: Maggie's Custom
That's awesome man was hoping for an update. Looks like a good amount of space ...can't wait till we get our house so I can have my ultimate guyrage. Ill be waiting for some progress! :chevy:
Posted via Mobile Device |
Re: Maggie's Custom
I agree, the shop looks great! Looking forward to continued progress on 'Maggie's Custom'. :bowtie:
|
Re: Maggie's Custom
Right on!
Glad to see you're getting to get started again. Posted via Mobile Device |
Re: Maggie's Custom
Very nice!!
|
Re: Maggie's Custom
Congrats on the new shop!
|
Re: Maggie's Custom
Good to see this thread on the front page again !!
I bet you are happy Spring is here too.... I am still anxiously awaiting its arrival !! |
Re: Maggie's Custom
5 Attachment(s)
We are back!!! Going back and looking at the thread I didn't realize it has been six months since I worked on the truck!! In that time we moved, added on to the shop, Maggie got a full time job (after graduation) and we got engaged!! Its been a busy six months to say the least!! Mean while Dino finishes one truck and almost done with another! Bomb, Jmorales3181, and coulter have been rocking and rolling on there projects almost passing us by!!
I have many pictures on the latest mods so tell me when to stop!! Someone suggested I add gusset to the sway bar links!! Done! Attachment 1096459 Here you can see the truck sitting on the center crossmember! Attachment 1096460 Got this idea from Jmorales, to get it done faster I done the work with it still on the truck. Trimed up. Attachment 1096461 Plate fitted Attachment 1096462 Welded in. Attachment 1096463 |
Re: Maggie's Custom
4 Attachment(s)
The rest of the crossmember!
Attachment 1096469 Attachment 1096470 Attachment 1096471 Lays on the ground!! Attachment 1096472 Maggie and Jason More to come today!! |
Re: Maggie's Custom
looking really good!! glad to see you are back at it!!
|
All times are GMT -4. The time now is 03:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com