Re: What did you do to your truck today.The 3rd chapter
 

I keep plugging away at it . Rear glass in

Re: What did you do to your truck today.The 3rd chapter
 

Starting to feel like Phil. Nother day nother door .

Re: What did you do to your truck today.The 3rd chapter
 

Painted my cab today after a zillion hrs of metal work and prep

https://www.beamingpix.com/images/20...y_1024x768.jpg

Re: What did you do to your truck today.The 3rd chapter
 

Looks great .

Re: What did you do to your truck today.The 3rd chapter
 

Nice! What sort of paint did you use?

Re: What did you do to your truck today.The 3rd chapter
 

Installed the PO3s I got from too much stuff. After couple hours with hammer and dolly and then cutting the centers out of the worst 2, I got them got put on today. When I get new tires, I’ll paint the wheels white like they oughta be. Now if I could only find some affordable Spicer big hub lockouts!:lol:

Re: What did you do to your truck today.The 3rd chapter
 

That does look fine.

Re: What did you do to your truck today.The 3rd chapter
 

Gave my rebuilt for the last time differential its 500 mile oil change. Got delayed a day when the friction modifier decided to pour onto the floor instead of the fill point - but Amazon delivered another 4 ounces on Sunday. Got it buttoned up and took a drive to stir it all up..

Re: What did you do to your truck today.The 3rd chapter
 

And to think that I thought I was the only one that had luck like that..:lol::lol:

Glad she's up and back in action.:gmc2:

Re: What did you do to your truck today.The 3rd chapter
 

I feel like I am chasing a toddler when it comes to pouring oil into the funnel for the truck. :uhmk::lol::uhmk:

Re: What did you do to your truck today.The 3rd chapter
 

Painted the bumper brackets yesterday now to coat the inside of the bumper . And made a mental note to not put wet por15 parts on cardboard ripped up big chunks of cardboard . Guess I should have put some plastic down

Re: What did you do to your truck today.The 3rd chapter
 

That is how I handled my cross sills - worked out pretty well!

Re: What did you do to your truck today.The 3rd chapter
 

I’ve always used plastic just wasn’t thinking . Inside of the bumper done just need to get some bumper bolts . Started late on it so I brought it in as it’s suppose to dip into the 40s tonight didn’t want to leave it out .

Re: What did you do to your truck today.The 3rd chapter
 

Painted my doors and fenders today.

https://www.beamingpix.com/images/20...y_1024x768.jpg

https://www.beamingpix.com/images/20...y_1024x768.jpg

https://www.beamingpix.com/images/20...y_1024x768.jpg

https://www.beamingpix.com/images/20...y_1024x768.jpg
https://www.beamingpix.com/images/20...y_1024x768.jpg

Re: What did you do to your truck today.The 3rd chapter
 

Looks great .

Re: What did you do to your truck today.The 3rd chapter
 

I've always liked that combo! Nicely done.

Cut up some bedsides and got started on putting them back together.
Posted via Mobile Device

Re: What did you do to your truck today.The 3rd chapter
 

Ended up making my own shiny bumper bolts . I thought I had ordered them but I went through my last 3 invoices not on any of them . Tail lights all work only had to play with one backup . Basically just back off the nuts and retighten.

Bumper does have a slight twist to it . It was real bad but I my 12k winch to pull it to where it is now. If it becomes a problem looking at it I’ll buy two chrome bumpers .

Re: What did you do to your truck today.The 3rd chapter
 

The truck is looking good. You're doing great.

Put the welded & reassembled box back on the truck.
Posted via Mobile Device

Re: What did you do to your truck today.The 3rd chapter
 

Looking good . You do great work , I need to get a new welder it never had the feel I like for thin sheetmetal . I have a Hobart 210 and it doesn't handle 24 wire that well

Thanks, I can’t take credit for the welding. I had it done by a local blacksmith shop, and they did it using the TIG process.
Posted via Mobile Device

Re: What did you do to your truck today.The 3rd chapter
 

Nice job, beautiful.

Re: What did you do to your truck today.The 3rd chapter
 

Tied up some loose ends and installed a bench seat today. Of course the bench is temporary. It takes a long while to receive correct upholstery these days, ordered three months ago, they say as late as December. But I want to get this running, so a practice run on the bench I guess.

More than that I'm declaring a milestone. Long time coming, it's a battery and steering wheel away to roll for exhaust then start-up. Course the exhaust is pending, same with the battery, special is slow these days.

Still needs glass, seems that should occur, any day now:metal:

I've owned this 33 years, never saw it with a stove pipe until today. Always looked forward to it.

Re: What did you do to your truck today.The 3rd chapter
 

Looking terrific!!! Put some lotion on your cheeks so the don’t crack. From the big grin you’ll have on your face when you take it out the first few times.

Re: What did you do to your truck today.The 3rd chapter
 

Looks great!! Hope to see it in person.

Re: What did you do to your truck today.The 3rd chapter
 

Wife and I took ole rusty on a dinner trip up to Boog's stomping grounds. We've only been driving it locally making sure everything is sorted well and this trip was about 40 miles round trip. Truck did great but I realized the shorty cherry bomb exhaust has got to go. I have another muffler already and have ordered some pre bent pipe to rework it.

Re: What did you do to your truck today.The 3rd chapter
 

Right front fender was worse than I expected . Found some rot in the cup and rear after working out the dents . All in all it’s better than 90% of the ones I looked at . No prior bodywork which is a plus .

Filling and lead are all but a lost art . I’m not leading it but I did work several hours messaging the metal . Guess if you tried on a new car you would tear the metal apart. :lol:

Re: What did you do to your truck today.The 3rd chapter
 

I've pulled the governor out of my 700R4 eight times so far over the last two evenings in an attempt to raise the WOT 1-2 shift point to somewhere in the 5000-5500RPM range using a TCI kit. The two heaviest weights in the kit with the two heaviest springs were still above 5500RPM, and the 2-3 shift at part throttle was happening way too early, so I resorted to grinding down the original weights. Now I've got it shifting at around 5300RPM, and the part throttle shifts are spaced apart nicely. My wife snapped this picture as she was coming home from work yesterday evening.

Re: What did you do to your truck today.The 3rd chapter
 

It’s a pain when you have to make stuff work like it’s suppose to.

Well I decided to cut and weld out the damaged area around the front half of the wheel well because I wasn’t happy with the lip area and I was going to do the cup anyway. If I was going to use moldings it would have been fine. So I cut up an aftermarket fender . Took a lot of fitting to get the cuts good enough to butt weld . Transplant was successful. ;)

Re: What did you do to your truck today.The 3rd chapter
 

Great progress, guys. Always impressed with the bodywork I see here.
Here's me finding out a clutch job turned into a trans + transfercase rebuild. Might as well refresh the engine while i'm here :chevy:

Re: What did you do to your truck today.The 3rd chapter
 

Hi Pat,
How come you have Blue plates, rather than the Black/Gold ones?
Old 919 used to sport Black/Gold plates when I bought it. The military made me register my truck and get a driver's license in the state that was my Home of Record. My parents had moved to Arizona, so that was the new ''Home.''
I had to turn in my Calif. [10 566 A] and get an AZ plate [2JY150] at the MVD [not DMV].

Re: What did you do to your truck today.The 3rd chapter
 

That is a good question! The L on the end of my plates indicates they're from 1971 or 1972. If my truck was owned by CalTrans originally, then it would have had state government plates stamped "Exempt", and would have been removed before selling the truck to the general public. It's also possible that it spent its first few years of existence in another state.

Re: What did you do to your truck today.The 3rd chapter
 

Adjust the throttle/detent cable that comes from the transmission to the carb, if you want it to shift later, adjust it a bit tighter ........

Re: What did you do to your truck today.The 3rd chapter
 

well that's a cool shot,a classic.laying under an old truck.we've all been in that same position.

Re: What did you do to your truck today.The 3rd chapter
 

Sounds like my stepper . Said I was just going to replace the wood bed after it was apart "might as well paint the bedsides " and here I am 3 years later buttoning it up .

Re: What did you do to your truck today.The 3rd chapter
 

Finished up the metal work . Had to replace a few of the nuts as they looked like they had been crossed at one point .

Re: What did you do to your truck today.The 3rd chapter
 

Some nice body repair there 72c20customcamper

Re: What did you do to your truck today.The 3rd chapter
 

Thanks I’m still wrestling with this welder . It’s a Hobart 210 and didn’t come with the feed wheel for .024 wire . I ordered one today we’ll see how it works out .

Re: What did you do to your truck today.The 3rd chapter
 

The drive wheel doesnt have more than one groove for different size wire?