Re: What did you do with your truck today, Part 3
 

Got my cab in 100 grit. Starting to fit the doors back on.

I am trying to order the side beds for my short box but they keep trying to add $300 in shipping. Anyone have a better alternative for shipping to Michigan?

Re: What did you do with your truck today, Part 3
 

Prepping my running boards for bed liner. I loosened the running board-to-fender bolts to make a slight gap for painting, then masked and sanded. Yes, it would been easier to have done them before I installed them, but my goal back then was to get the truck on the road first, then finish the details.

Re: What did you do with your truck today, Part 3
 

:devil:

Brian

Re: What did you do with your truck today, Part 3
 

Put the front clip back together today. Props to you guys who do it with freshly painted sheetmetal i would have scratched every panel. The cow pusher didnt really help much either


https://i.ibb.co/XYtKqw8/6-C9-AD652-...B921-CB668.jpg

Re: What did you do with your truck today, Part 3
 

You don't need no stinkin' hot water to work on your truck! :)

Re: What did you do with your truck today, Part 3
 

I am an auto body professional, I can cut the floor and quarters and rear body out of a 2015 Mercedes and replace it all using manufacturers guidelines to a tee, I can install fenders on late model cars with my friggin eyes closed making a perfect fit at every seam to hood and door. That being said, these frigging trucks are a LIVING HELL to assemble and align! :devil::devil::devil::devil::devil::devil:

Brian

Re: What did you do with your truck today, Part 3
 

I could even live without the water heater, but the WATER, I need that!

Brian

Re: What did you do with your truck today, Part 3
 

So true! Sorry you had to go on a plumbing adventure!

Re: What did you do with your truck today, Part 3
 

Sorry no photos, got some bondo work done on the rear fenders before I left for home today.

Brian

Re: What did you do with your truck today, Part 3
 

Installed the sound deadener onto the underside of the roof.

Also continued the preliminary bodywork on the bed sides. They were so mangled I had to pull the tops back to 90 degrees with a come-along and weld them to the stake pockets.

Re: What did you do with your truck today, Part 3
 

I chickened out on using bedliner on my running boards and just painted them instead. I still have nightmares of undercoating my Model A fenders; after I was finished I didn't like it and it was nearly impossible to remove! Paint isn't such a big committal and is easily touched up if necessary.

Re: What did you do with your truck today, Part 3
 

You might consider some of this stuff:

https://www.ebay.com/itm/VViViD-Clea...item3b07239c8e

Re: What did you do with your truck today, Part 3
 

So I started out like this, then I got the fuel lines bent and fastened down, the go the fuel lines made, then got the battery box installed.
Then the glass guy's showed up because the windshield gasket was installed upside down, they came with a crew of 5 people and fixed it 20 minutes!
Then I put the new battery in and the bottom was to big, So I cut the side hold downs off. I was happy with the fit, so I grabbed the painted battery hold down, only to find out the battery has recessed posts so it won't work...

I figured out I can just take a 1 inch wide piece of spring steel I have and drill a hole in each end then powder coat it Black and all will be good!

Re: What did you do with your truck today, Part 3
 

ooooh I bought some!

Re: What did you do with your truck today, Part 3
 

Brian: I thought you might be interested in this truck currently for sale on Ebay. Note the line where they sectioned the hood, almost identical to yours.

Re: What did you do with your truck today, Part 3
 

WOW! Very cool, I just found it on ebay. That sucker is a good start but has a LOT of work to do! The hood is sectioned similar to what I am planning, interesting. You can see that hood isn't meeting back with the cowl, it really is very close to what I am doing. https://www.ebay.com/itm/1948-Chevro...EAAOSwVcBc59VK

Brian

Re: What did you do with your truck today, Part 3
 

I got out there for my five minutes after some other projects and a six mile evening walk. I have been sorting out in my head what to do here. I need to start with rear brace that goes from hinge to hinge. It's funny because it's really tied together with the cutting of the skin and kinda needs to all be done at once! Not do one then the other, one half then the other, nothing like that, it needs to be done all at one time! :sumo:

This rear brace has to be cut properly and this is kinda challenging, more than the skin to tell you the truth. I cut this one on the right side 2.5 inches, done deal.....or so I thought. All I can think is that the arch of the hinge changes everything, because you can see that it isn't even close to fitting, I need to add a half inch or so, and it's not even, a half inch average, like a quarter on the rear of it and three quarters at the front! So that's where I will start go get that right then the other side then get back to the skin.

Brian

Re: What did you do with your truck today, Part 3
 

It's only logical that as the upper hood comes forward to meet the lower hood it would leave a gap at the cowl.

Note the pie cuts to match the upper and lower hood curvatures:

Re: What did you do with your truck today, Part 3
 

Got the headliner in and lined up with the visor screw holes. Then I test-fit the upper back panel. All fit pretty well, but it's just hangin' there. That little bit of upholstery work moved the wife from ignoring the project to saying she wants to DRIVE it! As Martin would say, WOO HOO !!!

Then, when I came to installing the rear window I got a little surprise. I had bought the glass at a swap meet for an unbelievable $15 two years ago, wrapped in what looked like the original paper. Well, the corner is chipped out, and the chip isn't in the paper. The seller knew it was broken and palmed it off on me. So, I ordered a new one from Auto City Classic today and am held up a week on this part of the project.

Literally, two steps forward, one step back.

Re: What did you do with your truck today, Part 3
 

Glad to hear they took care of you!

Re: What did you do with your truck today, Part 3
 

Had a family BBQ day, didn't do a bit of work but I spent the 5 minutes buying some new window glass frames for the doors. It kinda sucks as I chopped mine already but they were SO rusted, really badly eroded and un-chromable. I have been looking for another pair and some came along and I grabbed them. So I got something done. :D

Brian

Re: What did you do with your truck today, Part 3
 

Wow, that's awesome. Glad the wife's on board. Where did you get those cool flamed panels?

Re: What did you do with your truck today, Part 3
 

Thanks for the nice words.

I looked at a bunch of flames on cars and decided what I wanted mine to look like, then drew them on plain paper. Light-duty cardboard would have been better. I'm a bad artist, so I spent more time behind the eraser than I did the pencil. I then traced the pattern onto 1/4" high-density closed cell foam (bought on Ebay):

https://www.ebay.com/itm/High-Densit...bcP6QvzUu__omQ

...then cut all the edges at a 45-degree angle with a bare single-edge razor blade. That part is easier than it seems. The stuff cuts like butter. I glued the flames to the fiberglass backer board I had laid up, then upholstered the whole panel starting at the center and working toward the sides. (If you try this, I'll warn you that the vinyl doesn't want to behave near the corners of the board.)

Actually, the wife bought the truck nine years ago (I hate to admit how long I've been working on this beast.), on a $2500 asking price. She had told the poor guy she had to leave, but that she would write a check for $1500. He didn't know how to hit that curve ball - coming from a lady I suppose - so he just said "OK". She had him deliver it for free. I've been in the garage since 2011 (off and on, but this year's the year!).

Re: What did you do with your truck today, Part 3
 

Right on! :metal:

Brian

Re: What did you do with your truck today, Part 3
 

The wife and I went for a nice cruise...

Re: What did you do with your truck today, Part 3
 

Can't wait to do that!

Brian

Re: What did you do with your truck today, Part 3
 

Finally got my brakes and spindles the other day so I could put the temp wheels on with the new chassis

Re: What did you do with your truck today, Part 3
 

In the weeds!

Re: What did you do with your truck today, Part 3
 

I got the first electrical thing working on the old girl, got the intermittent wipers working!
Next was to install the windshield trim with the auto light sensor and 2 GPS antennas. Then I put the 9" touch screen Navigation stereo in, but not hooked up.
Next I put in the heater controls.
Then I put in the speedo cluster.
Next was to get the steering column and intermediate shaft.
Then decided to take a couple pictures...

Re: What did you do with your truck today, Part 3
 

Lookin' really good Jim

Re: What did you do with your truck today, Part 3
 

Thanks Mark! I used a couple of your ideas!

Jim W.

Re: What did you do with your truck today, Part 3
 

I wasn't going to do anything, spent the day working on the Rambler, getting it ready to sell. Swapped out some parts that go to my truck that I just had used in it like the Bermuda Bell and a unique toggle switch from when I bought my truck that I MUST keep. Cleaned the trunk out, you get the idea.

Went out to dinner with my wife and came home at 9:30 thinking I HAD TO get out there. So I spent some time on the rear hood brace. OMG this is complex, the geometry changes if you move it a quarter inch. So it is VERY different than I had planned simply removing that 2.5 inch, oh yeah baby, VERY different. So, I set it up and tacked the lower piece in place and then put the hood top in on to see how it worked out and had it all fit up there and then looked in to see that the lower part of the brace was a friggin quarter inch away from the bottom of the hood! CRAP

I pulled it apart and cut the welds then put it back in there and put the hood top on. Clamped it all in place and then had to climb in under the truck up into the eng compartment to tack those pieces together. I got it apart and lifted the lower hood up and down a bit and it looks like it will do the job.

Got in at 10:15, ok, I am done, I feel good though, it's rolling along.

Brian

Re: What did you do with your truck today, Part 3
 

Today I yanked out my seats and took them to the upholsterer. I hope the Speedway reproduction seat covers I supplied him fit well and I hope it's not too expensive. He's a long time friend who always treats me right so I trust him to give me the best deal possible. They're originally late '60s GM seats and I dig the low-back retro look so I'm sticking with them. While they're out I'll be quickly making patterns for carpeting and door panels.

Re: What did you do with your truck today, Part 3
 

I agree with you those seats are perfect for that truck. I had similar ones in my truck back when I first started driving it in 77.

Brian

Re: What did you do with your truck today, Part 3
 

Good choice. If leaving it black like that it can be touched up. Can adhesive strips for traction be applied? I don't use mine. Wife does

Re: What did you do with your truck today, Part 3
 

This weekend I installed a radiator overflow tank.

Scrubbed tailgate with 00 steel wool. Cleaning it

And remembered that a week ago my bug catcher was stuck and I sprayed it pb blaster.. no longer stuck.


The radiator leaks a bit around the "old radiator cap" just a bit

Re: What did you do with your truck today, Part 3
 

Finally getting some garage time and trying to wire up and install these gorgeous dials. Classic Instruments.


https://live.staticflickr.com/65535/...bd1d3f9d_c.jpg

https://live.staticflickr.com/65535/...2c770e0d_c.jpg

Re: What did you do with your truck today, Part 3
 

Nice overflow tank! I went with bourbon :)

https://live.staticflickr.com/4768/2...8c395dd8_c.jpg

Re: What did you do with your truck today, Part 3
 

Got waylaid by a box of kittens dumped at the local market. Took them to a shelter which took most of the day. Four wonderful little souls, full of love and the potential to change your life...

Then used the "5 minutes" I had left in the day to cut a craft paper carpet pattern for my seat pedestal.

Re: What did you do with your truck today, Part 3
 

Right on! On both accounts, you got something done on the truck and you saved a few fur balls that I hope will find a good home. My cat, was sort of the same thing, but just him, caught in a fence crying in the middle of the night and my niece went and got him he was only about a week old if that! I fed him with an eye dropper and he stayed in a carb board box next to our bed. That was 10 years ago and he has no idea what so ever what a bad day is even like since the day I got him.

I got out for my five minutes which wasn't easy, I really didn't feel like it and had to stick with the plan, or nothing would get done! I cut up the drivers side hood bracket and got it trail fit, needs a little work and I will weld it up. I also had to relieve the bottom of that area on the side of the cowl where the hinge bolts so it can go down further. I am telling you, cutting up the skin on the hood is childs play next to this mounting of the hinges!

Brian