The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO! (https://67-72chevytrucks.com/vboard/showthread.php?t=585901)

Palf70Step 07-17-2018 09:53 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Kool table, You can drop it off at my place anytime ;)

Grizz1963 07-17-2018 06:01 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Indian113 (Post 8302813)
Wow! Good Find you lucky Dog. Materials alone would have been a lot more- I Think! LOL

It is galvanised too.

Materials would be a load, plus time and effort for,prepping

Think I did good.

Quote:

Originally Posted by Palf70Step (Post 8302842)
Kool table, You can drop it off at my place anytime ;)

Postage would be a killer.

I am very pleased that pride is not part of my make up..




Sunday Bootfairs X2

My best day to date.

Random stuff, more than half for other people, but I scored a few nice bits too.

Most expensive was a £2.00 wooden Christmas tree that I would not bother making myself.

Two dog jackets for Dennis’ dogs, £1.50

When I got home and saw the price tags, I had to laugh.

We’re £7.00 each, marked down to 20p each somewhere in the past.

Ooooppps.

http://i294.photobucket.com/albums/m...psivcnujgt.jpg

My one of two favourites, as I like smaller miniature stuff.

50p

http://i294.photobucket.com/albums/m...ps0djjuecv.jpg

Check the date in the front.

http://i294.photobucket.com/albums/m...psgoffyzvb.jpg

Bought an old cutthroat, really bad condition for £1.00

And a Sabatier knife for 20p

Cleaned the knife, sharpened up and used last night.... what a beauty.

http://i294.photobucket.com/albums/m...psolsyijcs.jpg

Stuff I kept for myself, also with Christmas tree and frog cushion.

http://i294.photobucket.com/albums/m...ps7yrx85h3.jpg

Grizz1963 07-18-2018 03:36 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Only had 40 minutes between getting home from work and having to shower last night with Joy coming over for dinner, so could not do anything big, like the truck or that work bench.

So decided this could be seen to in 45 minutes.

Remember it was another dumpster find.

Very early BSA Meteor .22 Air rifle.

More vintage than weapon, so let’s see where it goes.

Mate Craig found it and gave it to me as his wife does not agree with guns on their property.

http://i294.photobucket.com/albums/m...ps24kxpbjh.jpg

Plan is to restore it, I have bought a replacement barrel seal and 500 pellets.

Stripped it down and started on the stock, removing varnish and sanding down to very fine grade by hand.

http://i294.photobucket.com/albums/m...pse9zwctfl.jpg

Next up will be either Danish oil, Matt clear varnish or oil.

I will see what the metal work looks like once done as it is a bit rough.


http://i294.photobucket.com/albums/m...psp9zdmns8.jpg

Grizz1963 07-18-2018 06:09 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Reversed off a raised verge outside my house a few weeks ago, when working on the Chevy speaker holes and managed to tear the bottom bumper lip that had been bodged together, including cable ties, before my time, off somewhat.

http://i294.photobucket.com/albums/m...pshguqhkq8.jpg

Been wanting to bodge it together ever since, and had a plan, just not been able to get to it.

The weekend when I discovered the welding bench in a skip at a panel shop, I was looking for a random bumper to cut up and repair and camouflage the damage. However, they did not want to give me a bent bumper, this evening on the way home, I had to fill my car and went to a different shop, they gave me a bumper off a Toyota Aygo as well as a Mk1 Mini tailgate in good condition which may become a small bench or wall hanging.

http://i294.photobucket.com/albums/m...psqsfsslyq.jpg

http://i294.photobucket.com/albums/m...psuebnxtrv.jpg

Measured up the bumper, marked out some lines and cut.

http://i294.photobucket.com/albums/m...psccnqukvx.jpg


http://i294.photobucket.com/albums/m...psopouymcc.jpg

And with Mitsubishi turbo truck air scoop.

Needs to be fine tuned, and then self tappers from below.

Followed by painting the lip black. Needs something else to cover th original lip break.

http://i294.photobucket.com/albums/m...psbgiz2v64.jpg



Decided to reassemble after cleaning the gun.

http://i294.photobucket.com/albums/m...psh8hw8tj4.jpg

Pellets and barrel seal,landed today.

Have shot with it in the dark tonight, packs a decent punch still.

TG serial numbers begin in 1974 and run to 1978

Just in case you missed something off.

T METEOR MK1 0.22 1959/62
TA METEOR MK2 0.22 1962/66
TB METEOR MK2 0.22 1966/68
TD METEOR + SUPER MK3 0.22 1967/69
TE METEOR + SUPER MK3 0.22 1969/73
TG METEOR + SUPER MK4 0.22 1974/78
TH METEOR + SUPER 0.22 1979-
N METEOR MK1 0.177 1959/62
NA METEOR MK2 0.177 1962/66
NB METEOR MK2 0.177 1966/68
ND METEOR MK3 0.177 1967/69
NE METEOR MK3 AND SUPER METEOR MK3 0.177 1969/73
NG METEOR MK4 AND SUPER METEOR MK4 0.177 1973-79
NH METEOR MK5 AND SUPER METEOR MK5 0.177 1979-

http://i294.photobucket.com/albums/m...ps6quggdnz.jpg

So that is that done too.


Over in St Louis, Dennis continues to build his gas station.

Roofing going on, he is laying the front deck flooring in thick oak.

http://i294.photobucket.com/albums/m...psjqzpwtaj.jpg

This week he also managed to find and buy this old station gun.

http://i294.photobucket.com/albums/m...psxbekpt52.jpg

Still needs loads of stuff to make it an authentic vintage gas station.

Later.

Bedtime now.

aggie91 07-19-2018 09:37 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Nice work on the dash and the new pellet gun.

Love to see what you find at your bootfairs and now the skip. Over here we call that "dumpster diving"...lol

You should add a line from that Pickups & Come-Ons book to your posts every so often...

Palf70Step 07-19-2018 02:33 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Nice work on prozak and the gun.

Grizz1963 07-19-2018 04:59 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by aggie91 (Post 8304251)
Nice work on the dash and the new pellet gun.

Love to see what you find at your bootfairs and now the skip. Over here we call that "dumpster diving"...lol

You should add a line from that Pickups & Come-Ons book to your posts every so often...

Thank you Karl.

I love the Bootfairs and also Dumpster diving as it allows me to experiment cheaply with stuff.

If you would like the Pickup and Come-ons book, I would love to pop it in the post for you, on condition that it lives in your bathroom behind the toilet :mm:


Quote:

Originally Posted by Palf70Step (Post 8304454)
Nice work on prozak and the gun.

Thank you Bill, happy with both.

Grizz1963 07-19-2018 05:02 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
After work tonight, I cut the front hedge and shrubs, all the grass and then thought I would relax....... ermmm wrong.

Went down to the garage, moved Prozac and got started on cleaning the welding table/workbench.

http://i294.photobucket.com/albums/m...ps2y4kumkc.jpg

Scraping all the paint off after clearing all the gunge of years off the flat surfaces took some time.

http://i294.photobucket.com/albums/m...psjb9lc1h7.jpg

Finally two washes with petrol,and an old t-shirt gave me this, ready for either new paint or just leave it as is.

Still thinking.....

Opinions?

http://i294.photobucket.com/albums/m...psa4i6bge5.jpg


After reassembling the skip find air rifle last night and shooting in the dark, I also set it up tonight.

The little sight is not as good as the modern item I bought for the newer gun I bought recently

Size difference between the two calibers.

http://i294.photobucket.com/albums/m...psqyojhfdu.jpg

And after three sets of 5 pellets and setting up the scope, this was the result.

I am really impressed with this skip find.

http://i294.photobucket.com/albums/m...pszwsy3kbk.jpg

So there you go, skip finds....

Free cash.


And lastly, a pic of Dennis’ progress with the deck out front of what will be his replica vintage gas station.


Note the broom on there.......

Made by Andy; he also is Blacksmith Thread here:

https://www.garagejournal.com/forum/...d.php?t=334140


http://i294.photobucket.com/albums/m...ps8kxlrrqw.jpg


Thanks for checking in.

aggie91 07-20-2018 03:18 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Grizz1963 (Post 8304551)
Thank you Karl.

I love the Bootfairs and also Dumpster diving as it allows me to experiment cheaply with stuff.

If you would like the Pickup and Come-ons book, I would love to pop it in the post for you, on condition that it lives in your bathroom behind the toilet :mm:

...

I'll send you a PM, I have some license plates I would like to send you. Maybe a trade so to speak...

Grizz1963 07-21-2018 03:15 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by aggie91 (Post 8305260)
I'll send you a PM, I have some license plates I would like to send you. Maybe a trade so to speak...

I made up the envelope this morning, put it in the car, but got distracted

Will get it in the mail soon enough though.

Grizz1963 07-21-2018 04:19 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Weird day.....

Woke early, fell asleep again and then woken by 07.30 by Harley making tiny little noises to see if I was alive.

Had to run around to get some stuff from shops, needed a new hedge trimmer as the one I have abused the last 6 years is dull as hell now. Needed some flat headed self tappers and Danish Oil too for some deck chairs Imhave to give some attention to.

Eventually home by 12.00 and then down to the garage.

Had planned some truck time today, and also wanted to start investigating a door or fender.

Looking forward to trying these Tungsten Carbide tips out as well.

http://i294.photobucket.com/albums/m...pszftiyipp.jpg

Prozac needed to be completed after I ran out of time last weekend.

Ghetto repair part one was to raise the front end a bit, no need for jack.

http://i294.photobucket.com/albums/m...psb4qq7zlr.jpg

Ex Aygo front lip fitted and screwed in place.

While under there, I realised just how messed up,the underside of the front end is, before my time for sure.

Fitted.

Paint next.

http://i294.photobucket.com/albums/m...psuc8tdjbf.jpg

Completed.

Lower than expected, that is good then.

http://i294.photobucket.com/albums/m...psyfolixgn.jpg

Happy with the result.

Also took the wheels back to Black all round, but wonder if I should redo the red trim.

http://i294.photobucket.com/albums/m...ps6tvxsjzf.jpg



By 3.30I had called it a day, and came in for a drink.

Even Dukey, not too clever most days, got in on the action, licking the bottle of 7 UP in my hand.

http://i294.photobucket.com/albums/m...pssswnfh9l.jpg

Bootfair and hopefully truck time in the morning after other chores are done.


Later.

Palf70Step 07-21-2018 06:55 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Prozak's front lip came out real nice!

Grizz1963 07-22-2018 04:43 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Palf70Step (Post 8305913)
Prozak's front lip came out real nice!

Thanks Bill.

As long as I keep an eye on kerbs and other things over 3 inches tall, like garden gnomes :mm:




Woken at 03.00

Could not get back to sleep.

http://i294.photobucket.com/albums/m...psukh10ypc.jpg

Chatted to Dennis for about 45 minutes.

Bootfairs paid off.

http://i294.photobucket.com/albums/m...psusg58mzx.jpg

New, unused Olney hat £2.00

http://i294.photobucket.com/albums/m...psweuwpl8u.jpg

http://i294.photobucket.com/albums/m...psvmhsdfx1.jpg

A bit of research...

http://i294.photobucket.com/albums/m...pslolpmm1u.png

My other favourite.......

Aluminium safety hat, like new..... 50p

http://i294.photobucket.com/albums/m...psb6jh5jol.jpg

Could be an industrial style lampshade, or possibly I could try drawing onto it with a Sharpie and then engrave some scenery on it.

Other items included a pair of lump hammers, one for me, one for mate Craig, £1.00 each.
Safety glasses, 50p/pair
Large hip flask £1.00
D-shackles 50p each
Two Desperado glasses 50p each
Mug 50p
Quirky new Scarf for Joy £1.00
Toy for Wyzz 30p
Bearing scraper 20p
Radio (working) for my kitchen 50p
Working calculator for my office 50p
Grinding and cutting discs 30 for £8.00

Then back home to do ironing, clean house and then head for garage.

My deck furniture has been degenerating over time.

Found this chair on the South Circular and fixed it, minor repair.

http://i294.photobucket.com/albums/m...psxrnqga6d.jpg

Mate Kevin dropped off some chairs his wife had thrown out, so they needed a bit of tlc as well, mainly Danish Oil like the other chair did, but they looked a bit tired against it.

http://i294.photobucket.com/albums/m...psuyzz3wle.jpg

I made the mistake of buying two litres of Outdoor Furniture oil, and not Danish Oil as planned, only realised once I opened it and poured into my tub.

Still, it certainly revitalised the wood, comparing one done vs one not yet done.

http://i294.photobucket.com/albums/m...psgt6zzysy.jpg


I will go get some Danish Oil during the week and give them a coat over the oil.
Should be good.

http://i294.photobucket.com/albums/m...psnzyywz1h.jpg

Grizz1963 07-22-2018 05:26 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Been awake since 03.00

Had planned some truck time this weekend, just did not quite turn out as I wanted it to.

But, got stuff done and Bootfair God’s were kind to me.

Unpacked part of the small 2berth caravan that is one of my storage sheds, can’t go wrong with £40.00 for a large shed, can you?

Got the fenders out, that went in there over three years ago.

Laid them out and realised that I have my work cut out for me.

http://i294.photobucket.com/albums/m...psiueonco6.jpg

http://i294.photobucket.com/albums/m...ps5qpnvarx.jpg

Passenger side, filled with mud and not healthy, loads of filler evident.

http://i294.photobucket.com/albums/m...psfha8jxso.jpg

Also evidence on both sides of loads of filler......

http://i294.photobucket.com/albums/m...psteam9ksz.jpg

Looks like a world of pain to me.

http://i294.photobucket.com/albums/m...ps98j3e62h.jpg

Patch panels and replacement braces laid out.

http://i294.photobucket.com/albums/m...pspzrhvpq1.jpg

http://i294.photobucket.com/albums/m...psd4pvt0kz.jpg

In the end I decided that as it was 15.00 already, I would carry on with the r pairs on some,hardwood deck,chairs mate Kevin had brought over.

Now the weekend is over it seems..

Thanks for checking in and commenting all.

Grizz1963 07-22-2018 06:00 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

may I do the Brighton version of boot fairs with your list? If those things were here, it would go a little something like this;


a pair of lump hammers, one for me, one for mate Craig. yeah they're vintage mate £30 each.
Safety glasses. a lot of people are wearing these at the moment mate £65 pair
Large hipster flask £120
D-shackles, big on the gay scene right now, galvanised which is better, I dunno why it is better though. £8 each, I can sort you out some chain as well mate, only a tenner a foot/ you wont get it it any cheaper trust me
Two Desperado glasses, nicked from a pub but they're original, well futile £7 each. £7? but you stole them? yeah it is what it is mate
Mug (starting to wonder who the mug is at this point)
Quirky new Scarf for Joy, oh its a present? she will love it, its only £45
Toy for Wyzz. you have a dog? must be rich... all dogs love these mate, especially your French bulldogs £10
Bearing scraper, priceless. as no one will know what it is, no one will ask how much it is. although some kid with a moustache and a top hat will mumble something to his mate about it being Vintáge
Radio (working) for my kitchen, 50p, too new and ordinary to sell for loads and get shafted, you may well get one for 50p.
Working calculator for my office, needless to say the £20 asking price will be explained with over used adjectives; retro, vintage, oldschool digital etc
Grinding and cutting discs 30 for £8.00 - these will sit unsold, only clean handed folk live here, getting your hands dirty is not a good look.




despite this, I still go to the Brighton marina boot fair often. didn't get anything but saw a skull I liked. it wasn't anything majorly crazy but it was £90. so it didn't come home

One of the guys on Retro Rides responded to my Bootfair posting, made me realise I am onto a good thing here.

flashed 07-22-2018 09:10 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Your Bootfair findings are always spot on . I need to go to next meet here .

Grizz1963 07-24-2018 03:31 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Grizz1963 (Post 8305813)
I made up the envelope this morning, put it in the car, but got distracted

Will get it in the mail soon enough though.

Went out yesterday from Post office.

Quote:

Originally Posted by flashed (Post 8306576)
Your Bootfair findings are always spot on . I need to go to next meet here .

Thanks John, you will find it does your head the world of good too.

It’s two fold, stuff Imay or do need and stuff I like.

Often the liked stuff is to give away.

For little money, I get two or three hours entertainment and get to keep the bits I buy.


Still researching joggled vs butt welded joins. However, the Guru has suggested Joggling

Once the next 12days are out the way, I may get back onto it. (Mid year reviews and a few other bits)

I need to clean up both fender panels on both sides and deconstruct them as far as needs to be gone.

Then decide what I have to work with.

There are oceans of filler there, and if you recall the original lower control arm, the truck was in a decent shunt at some point, so it could have included sheetmetal too.

As removed from the running driving truck.

http://i294.photobucket.com/albums/m...psqx4jgcfi.jpg

So there could be some more surprises hidden under all the red shiny paint

61K10 07-24-2018 03:03 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Good to see you back on the tk sense you have all kind of things going on. Just a note on your finder braces. If the upper part is good just use what you need at the bottom (cut new brace and weld in whats needed) as they are a pain to remove.

ibrown50 07-25-2018 03:52 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Great progress Rian.

I have used paint stripper and a wire brush on a grinder to strip both my fenders, you're absolutely right you have to know what you are working with before you start any repairs. A blow torch and scraper removes filler very quickly,:metal:.

With your fender repair it's all down to personal choice, I wouldn't joggle the fender repairs, it does give you a bit of leeway if you get your cuts wrong but you will run into problems getting the wheel arch to look right and the seam at the door edge will be tricky too.

I'd always butt weld this kind of repair, if you take your time with the measurements, leave an 1/8" extra on the panel for wriggle room and then grind the last little bit until you have the perfect fit. You have the skills to do that no problem

Grizz1963 07-25-2018 05:40 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by 61K10 (Post 8307869)
Good to see you back on the tk sense you have all kind of things going on. Just a note on your finder braces. If the upper part is good just use what you need at the bottom (cut new brace and weld in whats needed) as they are a pain to remove.

Quote:

Originally Posted by ibrown50 (Post 8308755)
Great progress Rian.

I have used paint stripper and a wire brush on a grinder to strip both my fenders, you're absolutely right you have to know what you are working with before you start any repairs. A blow torch and scraper removes filler very quickly,:metal:.

With your fender repair it's all down to personal choice, I wouldn't joggle the fender repairs, it does give you a bit of leeway if you get your cuts wrong but you will run into problems getting the wheel arch to look right and the seam at the door edge will be tricky too.

I'd always butt weld this kind of repair, if you take your time with the measurements, leave an 1/8" extra on the panel for wriggle room and then grind the last little bit until you have the perfect fit. You have the skills to do that no problem

Thank you gents.

I think cautious, slowly, gently will be the operative word here.



Took a day leave today so that I could prepare for my mid year review next week.

Yes, it is a big deal and a lot of preparing.

Fetched a fan from the garage, because it got hot.

This thermometer is inside my bathroom.

http://i294.photobucket.com/albums/m...psiqo8xnol.jpg

At about 19.00 Iwent to the garage to give the four rescue chairs a coat of Danish Oil.

With help as always.

http://i294.photobucket.com/albums/m...psqjw5d5hh.jpg

Despite the two coats of furniture oil, you can s e the difference the Danish Oil made.

http://i294.photobucket.com/albums/m...pshqaxuhdh.jpg

And all four done.

Happy with the exult.

Probably around £35.00 plus my time

http://i294.photobucket.com/albums/m...psotzo6tuk.jpg

Hopefully years of use ahead in them

clemdaddy 07-25-2018 09:01 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Hey Rian,
Your welding skills are right-on and I am so happy you are back on the truck. The radio panel fix and speaker fill look great and I agree, a light spread of filler and it's all good. By the way... I would love a welding table as cool as the one you got in the dumpster. Is it possible to put it in a suitcase when you next visit. We're looking forward to seeing your British self soon... till then.

aggie91 07-26-2018 03:43 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Chairs turned out nice. For the little work you did, I say money was well spent on those.

Grizz1963 07-26-2018 05:07 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by clemdaddy (Post 8308957)
Hey Rian,
Your welding skills are right-on and I am so happy you are back on the truck. The radio panel fix and speaker fill look great and I agree, a light spread of filler and it's all good. By the way... I would love a welding table as cool as the one you got in the dumpster. Is it possible to put it in a suitcase when you next visit. We're looking forward to seeing your British self soon... till then.

Thank you Clem, it feels good to be back, getting dirty but also problem solving.

Speaker holes have horizontal and vertical curves, but I am happy that they are very flat and need minimal filler.
Radio delete, came or better than anyone dared to expect.

And as far as seeing you, it is two crazy South Africans, transplanted to England 16 and 18:years ago respectively who,are looking forward to popping in in Fayetteville. Seems we may be headed down to New Orleans with Dennis before that too.
Three man road trip :mm:

Quote:

Originally Posted by aggie91 (Post 8309460)
Chairs turned out nice. For the little work you did, I say money was well spent on those.

Agreed Karl.

And typical of this sort of thing, they were perfectly fine, just neglected.

Now they have a life and purpose again.

Grizz1963 07-27-2018 04:00 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Yesterday........

Today promises to be even better.


http://i294.photobucket.com/albums/m...psovud6pjw.jpg

And a book I could do with reading, maybe.

http://i294.photobucket.com/albums/m...psopjy0mjv.jpg

Almost weekend though.

Grizz1963 07-29-2018 06:10 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Worked in London on Friday. Had a training session for 20 senior nurses that went great.

Earlier in the day I saw this bike.

Branded as a Mondial, I suspect it is another Chinese built clone, using an old name and license.

They are available in 125cc and 250cc and I love the look.

http://i294.photobucket.com/albums/m...psjbhuojbx.jpg

By 15.00my car said it was a bit hot.

http://i294.photobucket.com/albums/m...psbcdnh02d.jpg

Back home, even the cats had melted, looked like Dukey had tried to drag himself off the couch and failed.

http://i294.photobucket.com/albums/m...pscwzbpsiz.jpg

Had to go to the shops yesterday, was looking for some affordable work shirts, this led me to the usual Turkish restaurant I love going to on a Saturday afternoon.

Pizza anyone?

And no, it does not have to be round.

http://i294.photobucket.com/albums/m...pszs8rerbx.jpg

Not a good day for Bootfairs today.

The larger One has shut down for the rest of the year, due to trading laws, which means they can only use a site so many times per year, and the second site they usually move to has been closed down this year, as it will be developed into an housing estate.

So the smaller site was operating. But with less than half the field occupied by 06.30 when I got there, usually it’s a lot fuller even by then.

So I did not hold out much hope, and seeing hordes of Eastern Europeans flocking the site meant some shoving and being walked out the ground, fortunately I am larger than life and only got shoved once.

I walked the rows and there was very little of interest, and I tend to avoid tables when there are 10 young men milling about, all speaking foreign and getting way too close inside my personal space, I had been attempted to get pick pocketed a few years ago by a man, I got his hand on my wallet in my pocket, and landed a flat handed slap to the side of his head, this really pisssed Nicola off at the time as she was worried I could have been assaulted by a gang, but I told her in no uncertain terms to not even go there, she may have understood.

So by the time I got to the second row, after starting out, I saw some bits, randomly on a table. Seller a super nice guy, chatted with him for about 15 minutes in the end.

Bought a few things off him.

http://i294.photobucket.com/albums/m...ps3lek96lu.jpg

Some 150mm Velcro 320 grit sanding discs for when I get to that on the truck.

£5.00/50 per box, one box for mate Martin. Or about $7.50 per box

http://i294.photobucket.com/albums/m...psirjwtody.jpg

3mm drill bits 10/pack £5.00 took all four as they are disposable these days. Or $7.50 for 10
12mm HSS drill bit £1.00 or about $1.50

http://i294.photobucket.com/albums/m...psubgmhfnp.jpg

So the Bootfair was not a total bust.

Came home and now it is raining, perfect to break the long hot spell, and stop me from grinding a truck fender

http://i294.photobucket.com/albums/m...pstlc9g8dv.jpg

aggie91 07-31-2018 08:24 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
2 Attachment(s)
Got home late from work yesterday and had a nice little surprise in the mail box. Got a delivery from Rian. I had made a comment on one of his bootfair finds and he sent it to me along with a short note and a nice commemorative coin. Really cool stuff. Now to find something to send to him...

From page 71, People Specific: "My hinge could use a little grease."

Thanks Rian, it will be good reading in the office at home...

As I was putting the book down, I noticed on the spine at the bottom, is my initials. I was meant to be...:lol:

Grizz1963 08-04-2018 02:01 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by aggie91 (Post 8312529)
Got home late from work yesterday and had a nice little surprise in the mail box. Got a delivery from Rian. I had made a comment on one of his bootfair finds and he sent it to me along with a short note and a nice commemorative coin. Really cool stuff. Now to find something to send to him...

From page 71, People Specific: "My hinge could use a little grease."

Thanks Rian, it will be good reading in the office at home...

As I was putting the book down, I noticed on the spine at the bottom, is my initials. I was meant to be...:lol:


An absolute pleasure.

I know you will enjoy it in the small room.



Few random pics.

Craig sent me this pic, does he have a problem?

http://i294.photobucket.com/albums/m...psgwcndnjs.jpg

Kevins wife insisted I would love this mug.....

http://i294.photobucket.com/albums/m...psunerpie8.jpg

Why??

http://i294.photobucket.com/albums/m...ps53gc9p6r.jpg

My friend Bryan keep changing his Imp.

This years look.

http://i294.photobucket.com/albums/m...psoqkdcbyw.jpg

http://i294.photobucket.com/albums/m...psqxvyokza.jpg

http://i294.photobucket.com/albums/m...psai2zzfmj.jpg

http://i294.photobucket.com/albums/m...psq39rmgbd.jpg

Got lucky this week.

Lodger traded me for six beers.

New Bahco wrench.

http://i294.photobucket.com/albums/m...psmkjfpkb3.jpg

In other news, a friend who works in a hospital and is responsible for getting rid of broken and out of service equipment found me some wheels, possibly for the welding table, but I am waiting to see what else he finds.

http://i294.photobucket.com/albums/m...psob0kdoqx.jpg

http://i294.photobucket.com/albums/m...ps3xtljs6w.jpg

Over in St Louis, Dennis’ replica gas station is taking shape, rain and weather has hampered progress recently, but he hopes to get a full day on it today.

http://i294.photobucket.com/albums/m...psuphcpnln.jpg

Took a day vacation yesterday and did a load of garden work, as well as cutting my and Mickeys hedges. The heat was a killer, but it is all done.

http://i294.photobucket.com/albums/m...psoux85juo.jpg

Bootfair in the morning and hope to get some time on one or both of the truck fenders to clean them up to see what is hidden under it all,

Thanks for checking in.

Grizz1963 08-05-2018 07:30 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Took a day off Friday to get a load of yard work and hedges done as my back is so knackered now that I cannot just do it in one long push.
I had planned for Sunday to get into the garage to start on the front fenders.
Not happening in the end. Got a movie date at 2.30 today with Joy, much more fun.

Only one Bootfair now.
Today’s mini haul.

http://i294.photobucket.com/albums/m...psvu2vj8c6.jpg

http://i294.photobucket.com/albums/m...psjm6awbrq.jpg

Beer bucket for Craig £1.00
Weird Norwegian mug 50p
Gruffalo mug 20p
Toy for dog 50p
Bottles of nails 50p each
CD’s for myself 20p each
Snail Brand spanner 50p

Indian113 08-05-2018 09:01 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Those are unique Finds! Enjoy your movie date, take a short break on the truck. It all sounds Good, some Good BBQ and Brews would Top it OFF

aggie91 08-06-2018 10:59 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Hope you enjoyed your date with Joy. Since the kids where with their Mom this weekend, I was able to spend some time going thru boxes and getting stuff sorted for an upcoming swap meet next weekend. Got to keep my mind off of the other crap in my life.

Anyway, found a box I was looking for, I will be sending you a package out hopefully this week, hope you will enjoy it.

Grizz1963 08-08-2018 04:06 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Indian113 (Post 8315885)
Those are unique Finds! Enjoy your movie date, take a short break on the truck. It all sounds Good, some Good BBQ and Brews would Top it OFF

Agreed, a break is always a good thing.

I do love a great find.

Had a few

Quote:

Originally Posted by aggie91 (Post 8316646)
Hope you enjoyed your date with Joy. Since the kids where with their Mom this weekend, I was able to spend some time going thru boxes and getting stuff sorted for an upcoming swap meet next weekend. Got to keep my mind off of the other crap in my life.

Anyway, found a box I was looking for, I will be sending you a package out hopefully this week, hope you will enjoy it.


Joy is a pleasure to spend time with.

Thanks re package. That’s nice of you.




For all the Imp fans, Bryan sent me a couple more pics.

I am amazed at just how low and small it is.

Hiding behind the modern.

http://i294.photobucket.com/albums/m...psenkv5455.jpg


http://i294.photobucket.com/albums/m...ps1fphqotk.jpg

Grizz1963 08-08-2018 04:46 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Been trying to kill this cactus for three years, and it keeps on giving.

Last night.

http://i294.photobucket.com/albums/m...psaqly2jtq.jpg

This morning before 06.00

http://i294.photobucket.com/albums/m...pscv1vxlic.jpg

http://i294.photobucket.com/albums/m...psbxtlmivt.jpg

Life is good.

Prozac May have a big job ahead of him.

PaulY called me this morning to offer me a rather large, non functioning wind out awning.....

To be collected over in Essex stuck through the open sunroof.

Not a lot, but much to show.

Driving up to my home tonight I saw some krap on the pavement two houses down.

Went to investigate and brought some stuff back, all covered in bird poop.

http://i294.photobucket.com/albums/m...psvnvjrnn1.jpg

Included three old paraffin lamps, a chain and hook and a steel pin.

Also a 450watt Random Orbit DA Sander, identified by JohnnyBravo after a quick check on the part number.
Just needs a backing pad.

http://i294.photobucket.com/albums/m...pskoyfuadu.jpg

Strange front end.

http://i294.photobucket.com/albums/m...pspqnsdnzo.jpg


Dennis continues on his own, building his replica gas station.

Still looking for and gathering bits to decorate it.

http://i294.photobucket.com/albums/m...pscins8fgc.jpg

http://i294.photobucket.com/albums/m...pspirakrv1.jpg

Thats it.

Grizz1963 08-12-2018 04:33 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Well, what do you get if you combine a clown, well, a plate spinner.....

http://i294.photobucket.com/albums/m...psrv7rlhje.jpg

A truckload of beer

http://i294.photobucket.com/albums/m...psyfra77jo.jpg

Bacon.......

http://i294.photobucket.com/albums/m...psvngufegw.jpg

The Missouri Mayhem Terminator.

http://i294.photobucket.com/albums/m...psjqtqsucb.jpg

And some black lines that may just matter.

http://i294.photobucket.com/albums/m...psstq2b1ig.jpg

All headed to go inspect progress here.

http://i294.photobucket.com/albums/m...psuidb31mg.jpg

http://i294.photobucket.com/albums/m...psq0tswgl1.jpg

Progress......

http://i294.photobucket.com/albums/m...psmwfziltr.jpg

A old skinny cat with a sixth sense suddenly stuck like glue by your side or on top of you.

http://i294.photobucket.com/albums/m...pskhqjafxw.jpg

http://i294.photobucket.com/albums/m...psibawouf1.jpg

Must be a road trip.

Strange weekend, I was busy nonstop, and all I can show for it is a clean house, garden and bathrooms, plus a confirmed house sitter and cat sitter for September, all the way from Republic, Missouri.

How small is this world, it is where Dennis’ son Adam grew up.

PS. Bootfairs sucked big time today, spent a total of £2.20 on three items.

Better luck next week.

flashed 08-12-2018 06:25 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I have yet to make a swap meet , been working too much . Worked yesterday and today , not much of a weekend at all .

Grizz1963 08-18-2018 01:29 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by flashed (Post 8320988)
I have yet to make a swap meet , been working too much . Worked yesterday and today , not much of a weekend at all .

Soooon John.

And I hope to see your report back here.


Random acts of kindness some call it.

I say “Just because I can”

Recently bought a book at a Bootfair for my guest bathroom, one of the Chevy truck forum guys saw it and commented on it, so I offered it to him, he accepted and I put it and a Queens Jubilee coin in original presentation pack in the mail to him in Texas.

Yesterday the mailman delivered an envelope with some license plates, and a covering letter from Karl (Aggie)

http://i294.photobucket.com/albums/m...psm1weoxd4.jpg

http://i294.photobucket.com/albums/m...pszpjhu03p.jpg

Thank you mate.

Pulled from another thread, only in the USA

http://i294.photobucket.com/albums/m...psxtjsozw9.jpg


Weirdly, at the same time a “Come and collect it if you dare” card was put in my mail.

When I broke down last year in Arkansas, I was rescued and helped by Charles.
He sent me a parcel too.
Being a good, older Christian man and totally honest, he did a complete customs declaration on the contents.
Ultimately this was the associated costs, clearly quite unrealistic but I appreciate the gesture.
More than £20.00 in import duty and a handling fee for the post office plus of course parking and a trip into town.

http://i294.photobucket.com/albums/m...pst7yzxrjh.jpg

Contents, along with a coin.

http://i294.photobucket.com/albums/m...psktw0lwrr.jpg

http://i294.photobucket.com/albums/m...psvl5lkmtj.jpg

Covering letter from Charles.

http://i294.photobucket.com/albums/m...ps9mn6bx9o.jpg

Mate Bryan sent another pic of his Imp

http://i294.photobucket.com/albums/m...ps8fkgu02y.jpg

This years Road trip should be a Humdinger, with various visits to factories and members from other forums, including Andy in Oklahoma who collects all the Alluminiumhe can lay his hands on, as well as brass and bronze, which he then melts down to produce amongst others, hammers, trivets etc.

His thread here: https://www.garagejournal.com/forum/...d.php?t=334140

http://i294.photobucket.com/albums/m...psrvfacdr4.jpg


Headed to the USA with a clown as a travel partner is a bit worrying, but looking forward to this one.

Meet Craig, my travel buddy this year.

http://i294.photobucket.com/albums/m...psrl5uabz5.jpg

Seems to run in the family too.

http://i294.photobucket.com/albums/m...psqqkyckl1.jpg


PS: Craig is looking for various parts for his 47-50 Chevy AD trucks, Suburban and Fleetline.

Ideally he needs patina’d parts as his vehicles are all well worn.

I will post up his wishlist/what he is looking for when he gives it to me.

Grizz1963 08-18-2018 04:17 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
No idea what the fuel consumption is meant to be on these 1.4 liter petrol engines.

But today I filled up to the neck with 40 liters after 300 miles of unsympathetic driving.

http://i294.photobucket.com/albums/m...ps0rt6iwii.jpg

I guess the diesel models are a lot lighter on fuel.

Grizz1963 08-19-2018 10:37 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
After a few months of not getting much I liked at bootfairs today started out slow at 06.30 after I was awake from stupid-0-clock.

In the end I got home after 12.00 which is a record from about 5 years ago when they used to deliver.

A lot of the stuff may seem incredibly random, and it is too......

But remember that I shop for a few people, and some of the stuff I get is for my own pleasure.

I am just getting ready to do a BBQ for 10 as Joy wanted to do it at her place which is not really ideally set of for a good South African style Braai/BBQ so I offered my place to celebrate her dad who died a year ago.

It should be a good afternoon.

Report and photos later if you guys are still about.

flashed 08-19-2018 10:50 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Enjoy the BBQ , I will check in later , Im trying to get some shop cleaning done today .

Grizz1963 08-19-2018 06:06 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by flashed (Post 8325612)
Enjoy the BBQ , I will check in later , Im trying to get some shop cleaning done today .

Thanks John,

Here you go.


Progress at Dennis’ place with his solo build of the replica gas station continues.

Sides gong up.

Floors going down.

http://i294.photobucket.com/albums/m...psykmxrne3.jpg

Gutters being added.

http://i294.photobucket.com/albums/m...ps8sk2aexw.jpg

Had a BBQ for Joy today as a little celebration for her dad who died a year ago, with some of her best friends, and mine over.

http://i294.photobucket.com/albums/m...pstlovcwov.jpg

Food....

http://i294.photobucket.com/albums/m...psg7gaucr3.jpg

flashed 08-19-2018 09:20 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Food looks great ,what kind of peppers were those in the pan ?


All times are GMT -4. The time now is 12:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com