Re: Daverods project 66
2 Attachment(s)
Sprayed a bunch of bedliner in my doors and panels. Covered the panels with pea-ln-seal. Made them weight a bunch more should work good.;) Got my lower ball joint pressed in. Now gotta put it all back together. Ordered all new shocks and relocating hardware from cpp. Delux shock kit.;) Almost on the road again. Had to order a pressure swich for the accuair stuff. Can't believe it does'nt come with the kit.:sumo:
|
Re: Daverods project 66
i would think a pressureswitch and a relay is included with the electric pumps
|
Re: Daverods project 66
Yeah that kit cost enough. :rolleyes:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
i've seen a verry nice kit a while back it was a cage with a tank a compressor the valves and the switches allready installed inside a plastic cover in only needed a 12v hookup and all the lines to the 4 corners http://www.dreamershotrods.com/image...oductId=367425
they call it the airpod |
Re: Daverods project 66
I looked at that one. I already had my tank and compressors though. I liked the idea of a big tank and dual compressors. ;)
|
Re: Daverods project 66
I still got to send you a couple wires that I found. I'll try to get them in the mail box today
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
I haven't messed with it yet. I'll try to get on it this coming week. Been busy with the house. and I'm not ready to work on the bag set up.
Been dealing with the VA. I finally got my rating lastnight. I got a bunch of appts. and this is my DD. |
Re: Daverods project 66
2 Attachment(s)
Did some rattle can on my arms. Got the joints press in. Put it all back together. Found a bigger sway bar in my garage so I replace the one I had. Waiting on my front and rear shocks. Also got the shock relocating stuff.
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Looking good...did you press in the ball joints yourself?
|
Re: Daverods project 66
Daily Driver, Or soon to be Daily Dragger.
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
For now I'm just going with the hacked springs. Later I'll get lowered spindles and shorty exhaust. It's pretty low now with the spindles it will drag my exhaust.:lol: The paint cost about $5 and took about 5min.:lol: Now the cleaning is a different story.
|
Re: Daverods project 66
Cleaning is everything. I spent over a week cleaning the 57 Sedan Delivery I'm working on. I did the front part of the frame, and suspension. It was a mess. Then I made more of a mess with the sand blaster. :lol:
|
Re: Daverods project 66
What kind of paint did you use on that?
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
4 Attachment(s)
Drilled some holes/ran my air lines. Surprised how good my little hf drill bit worked.:uhmk:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
been to a factory in germany once from mahle
the productionrun was for mercedes pistons and they each had the little logo stamped into them after that they did a run for imitation/aftermarket pistons .......... they took out the logostamp and continued production for some stuff you only pay extra for the logo |
Re: Daverods project 66
Any one know how to sharpen those unibits?
|
Re: Daverods project 66
Why sharpen them . Just keep your reciept and go get a new one. I broke the first one I had. They are brittle. I just returned it. Guaranteed for life.:metal:
|
All times are GMT -4. The time now is 01:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com