Re: DURG's Black 65 C10
nice!
|
Re: DURG's Black 65 C10
Lookin' really great. Way to go.
|
Re: DURG's Black 65 C10
I am looking for a set of these Porterbuilt hood hinge relocation brackets. I thught someone may have a set after upgrading to his newer style hood hinges.
http://i224.photobucket.com/albums/d...onbrackets.jpg |
Re: DURG's Black 65 C10
Congrats! Looking really good, great attention to detail.
|
Re: DURG's Black 65 C10
Quote:
PM sent regarding hood relocation brackets. |
Re: DURG's Black 65 C10
Looks like member meltmetal is hooking me up with a set of Porterbuilt hood hinge supports so I can move forward with my front bracing. Thanks, Matt!
|
Re: DURG's Black 65 C10
Here are the Porterbuilt hinge brackets installed. I have made a couple removeable metal plates to weld the 1-1/2" metal tubing to that will run down to the frame horns from each of these brackets. The tubing will be welded into the center hole of the plate and ground flat on the back side. The braces will be attached to a removeable piece on the front of each frame horn as well. I will run a cross brace with a 3/4" heim end on each end that will attach from side to side near the front of the motor somewhere around water outlet height. I am also showing the new AAW main fuse block and the aluminum plate it mounts to. This plate attaches by longer upper bolts that go through the firewall that hold the hinge brackets on which are the OG holes used to attach the OG inner fenders.
http://i224.photobucket.com/albums/d...psb44981d8.jpg http://i224.photobucket.com/albums/d...pse3bcb28b.jpg http://i224.photobucket.com/albums/d...ps716b1ca8.jpg |
Re: DURG's Black 65 C10
Looking good! I am using AAW classic update on my 67 camaro project, LOVE their kits....
|
Re: DURG's Black 65 C10
Great build!
|
Re: DURG's Black 65 C10
Awesome truck!
|
Re: DURG's Black 65 C10
Quote:
|
Re: DURG's Black 65 C10
Few minor updates: Truck is back on the floor with the new a-arms installed with good adjustibilty on camber. I am toying with the idea of running a 61-62 style Impala barrel shroud as the stock fiberglass/plastic one won't be as easy to install as my radiator to engine height is different now. (I know the fan needs to move back to be centered) I used some PVC pipe to mock up how I want the front bracing to go. Went to get it bent yesterday at a near by racing chassis place but they were not working. I will be running a rod with heim ends from side to side connecting to where the lower elbows are shown on the braces. This will all be removeable. I am bolting a flat plate on the front frame horns that the braces will weld to on that end like onto the hood hinge brackets. Truck is shown at ride height.
http://i224.photobucket.com/albums/d...ps2cbf8f89.jpg http://i224.photobucket.com/albums/d...psa40e22c2.jpg http://i224.photobucket.com/albums/d...ps9ea58340.jpg http://i224.photobucket.com/albums/d...psb1953e8a.jpg |
Re: DURG's Black 65 C10
Great job...look super!
|
Re: DURG's Black 65 C10
Bad a$$!!!
Posted via Mobile Device |
Re: DURG's Black 65 C10
What did you have to change with your a-arms?
|
Re: DURG's Black 65 C10
Slightly shorter so I could have some camber adjustment.
|
Re: DURG's Black 65 C10
Quote:
|
Re: DURG's Black 65 C10
sweet ! :metal:hope you get it done soon
|
Re: DURG's Black 65 C10
Quote:
|
Re: DURG's Black 65 C10
Whats the backspacing on the coys? BTW great looking build!!
|
Re: DURG's Black 65 C10
i have been watching and must say you have a awesome truck, i like every thing about it, and the 62 is sweet, i had a red on red 62 ss whan i was 16 and my dad sold it and gave me a 72 cutlass. cant wait to see the truck finished, keep up the awesome work:metal:
|
Re: DURG's Black 65 C10
Got my front bracing roughed in down to the frame horns. There will be a cross brace to tie them together but I need to know where my accessory drive package will end up before I can commit to its location. I am leaning toward a GM Performance crate 350/330 setup with the front serpentine drive. The Impala twin is getting ready for spring. I still have snow on the ground here though.
http://i224.photobucket.com/albums/d...ps9ffb02e6.jpg http://i224.photobucket.com/albums/d...ps7cb0ac1c.jpg http://i224.photobucket.com/albums/d...ps69127ea4.jpg http://i224.photobucket.com/albums/d...ps0dd5418d.jpg |
Re: DURG's Black 65 C10
Great work on the support bars.
I highly recommend any drive from Billet Specialties. V-trac or Tru-trac would be my first choice. Vintage Air's Front Runner set up would be my second choice. |
Re: DURG's Black 65 C10
Quote:
After looking at them it appears triple the price 1795.00 with no A/C pump in polished. |
Re: DURG's Black 65 C10
Quote:
Love the build, just ordered the same PB setup! Posted via Mobile Device |
All times are GMT -4. The time now is 03:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com