Re: Got a new truck
 

Sounds like you're getting close man! Keep up the good work!

Re: Got a new truck
 

Well the shocks are on but i let out too much pressure so tomarrow we will have to fill them up again.

Re: Got a new truck
 

Well its on its own weight. Flexed to 40ins to the bottom of the back tire, on 31s if it matters. But we ordered the heims for the front I guess.

http://c4.ac-images.myspacecdn.com/i...d7cb6de107.jpghttp://c3.ac-images.myspacecdn.com/i...fc696cfe52.jpghttp://c3.ac-images.myspacecdn.com/i...daad10a416.jpg

Re: Got a new truck
 

Well today I believe we are going to get a set of 38s on 8lugs. I will drill them out and start getting ready to swap the dana 70s in. And going to have to think about how we are going to lik the front. I want to do a double triangle 4-link. But it might not be possible, so I may have to do a 3link with panhard. At full bump it will be where the front sits front maybe a inch higher.


And for the black tow rig we are going to get a 454 today.


Edit: I don't know if I said this but we are getting a 02 vortec motor for it, we just have to pull it out before the person sends the truck to the junkyard.

Re: Got a new truck
 

Cool! Nice progress! It's coming along nicely!

Re: Got a new truck
 

Well we picked up the 38s not the best but will work for now. The Rims are 16.5x12s so I'm going to jack up the black truck and swap them for the ones that are on my boggers so they don't wear uneven.

Re: Got a new truck
 

We got the 38s on the rear d70, tomorrow we will put the 38s on the front d70. We ordered the heims and coilovers and springs for the front. They will be the 2.5 fox 16in travel res coilovers. We ordered the coils based on a full size with a 454, so we I believe we will be swapping in the 454 we picked up.

http://c3.ac-images.myspacecdn.com/i...5efa330276.jpg

Re: Got a new truck
 

post up some pics of your axles and the tires.


10 lug sounds interesting!

Re: Got a new truck
 

The d70s aren't 10 lug, but they have the 5/8 lug bolts. And ythe ones from earlier, But I will get some pics.

Re: Got a new truck
 

ohhh i thought it was 10 lug.

5/8 lug bolts? how are you going to drill out the rims? drill press or hand drill?

Re: Got a new truck
 

The rims we got with the 38s fit it fine. We went to hand drill if but the bit went thru. So we put them on. THe stock rims and the spare for the black truck didn't fit but the these did, maybe someone driled them before us?

Re: Got a new truck
 

so your going to run the 38's on the truggy and leave the boggers on your black truck?

Re: Got a new truck
 

Yup never planned to run the boggers on this, but I was going to swap the rims.

Re: Got a new truck
 

Well the seat is going to finally be all the way in, and this weekend we plan to sandbalst and paint. The color will be black, same as the black truck.

Re: Got a new truck
 

any pics of the tires?

Re: Got a new truck
 

I thought I posted the pic but here it is, they aren't tight because we were just making sure they fit. And we stll need to the brakes.

http://c1.ac-images.myspacecdn.com/i...5a04e038c4.jpg

Re: Got a new truck
 

i just got some bfg all terrain 35s
those look a ton bigger does that 3 inches make a big difference

Re: Got a new truck
 

I think the rims make the difference, I had them next to my boggers and they seemed huge. Still on my way up in size, I want to go to 44in boggers.

Re: Got a new truck
 

what size rims

Re: Got a new truck
 

16.5x12s, the tires are 15.50. My boggers rims are 16.5x9.75, and the tire 16 wide. And the 38s seem to sit wider by a lot.

Re: Got a new truck
 

dang so 38s will fit fine on a 10 in wide wheel right

Re: Got a new truck
 

Yea, I see no problem with it, just the looks you aquire. to narrow of a wheel will give a sucked in, and in cases a balloon looking wheel. And to wide a balloon. But a 38x15.50 should wear pretty good on a 10in wide wheel.

Re: Got a new truck
 

i have 38x15.5 on a 10" rim and i have to agree with onlyifihadachevy
its got a good contact patch with this combo.

Re: Got a new truck
 

Well we are going to sandblast it today. We have 200pds of 20 grit. So we should be able to get the backhalf and some of the frame. We got the winch line lead extended, By about 5 in, 2 inches to much. But should work.

Re: Got a new truck
 

Well the sand ran out prety fast but we got the backhalf, rest of the cage running into the cab, the dash, and the rest the stuff we need to weld too. I started sanding while my dad went to get some more paint, but they where closed i assume because the superbowl. So I just sanded most the truck, except the top, and a the back of the cab. So tomorrow my dad said he would sand the little thats rest, and paint it.

Here is some pics.
First the fairlead thing.
http://c4.ac-images.myspacecdn.com/i...466776dc23.jpghttp://c2.ac-images.myspacecdn.com/i...b421a1fd5d.jpg
Then A pic of my dad blasting, and what I blasted. Looks bad but is good.

http://c2.ac-images.myspacecdn.com/i...6b45035881.jpghttp://c4.ac-images.myspacecdn.com/i...cd5f8b5063.jpg

And what I sanded, you can see the portion of the hood I didn't get.
http://c3.ac-images.myspacecdn.com/i...6c952b0b5a.jpg